scholarly journals Characteristics And Release Of Gentamicin Sulphate From Sodium Alginate Microspheres Entrapped In Emulgel

2019 ◽  
Vol 9 (04) ◽  
pp. 704-710
Author(s):  
Tutiek Purwanti ◽  
Maimuna Syamsuar ◽  
Dewi Melani Hariyadi ◽  
Tristiana Erawati
Keyword(s):  
Release Kinetics ◽  
Drug Loading ◽  
Active Agent ◽  
Particle Diameter ◽  
Aminoglycoside Antibiotic ◽  
Entrapment Efficiency ◽  
Duration Of Action ◽  
Gentamicin Sulfate ◽  
Low Viscosity ◽  
Kinetics Of

Gentamicin sulfate is a broad-spectrum aminoglycoside antibiotic that can be used for primary and secondary infections of the skin. Microspheres can be used to extend drug release on the skin; the resulting therapeutic effect is constant and has a longer duration of action. Therefore it can reduce the frequency of use and increase patient compliance. This study investigated the appropriate profile and release kinetics model of gentamicin sulfate microspheres entrapped on the emulgel base. Gentamicin-alginate microspheres were made by the ionotropic gelation method with aerosolization technique, using 2.5% Na-alginate low viscosity, CaCl2 solution of 1.5M as a crosslinker, maltodextrin as lyoprotectant and were dried using the freeze-drying method. The result of microspheres characterization, gentamicin microsphere was spherical with smooth surface structure and had particle diameter of 3.021 ± 0.017μm. Gentamicin microspheres had moisture content 2.89%, and maximum swelling index was 2625 ± 21.70% was achieved within 5 hours. The drug loading of microspheres was 1.75 ± 0.11%, and entrapment efficiency was 10.96 ± 0.19%. The release evaluation during 720 minutes showed that the amount of gentamicin release from alginate microspheres on emulgel base was 14.857 ± 0.816%, and gentamicin release on emulgel conventional was 49.239 ± 5.954%. The model of release kinetics of gentamicin microspheres on emulgel was Higuchi model that showed the release of the active ingredient through the diffusion process. While the model of release kinetics of gentamicin on emulgel base was first order, that showed the release of active agent depends on remaining concentration.

PREPARATION AND CHARACTERIZATION OF POLYMERIC NANOPARTICLES CONTAINING METRONIDAZOLE

2020 ◽  
pp. 99-104
Author(s):  
Nhan Ho Hoang ◽  
Tuan Nguyen Van Anh ◽  
Thu Ho Nguyen Anh ◽  
Ngoc Le Thi Thanh ◽  
Hao Le Hoang
Keyword(s):  
Particle Size ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Local Treatment ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Duration Of Action ◽  
Nanoprecipitation Method ◽  
Kinetics Of

Background (including purposes): Periodontitis is a chronic bacterial infection destroying tooth supporting tissues. Although metronidazole exhibits a high effectiveness in the periodontitis treatment, its fast release and the usage frequency of several times per day can become obstacles for the local treatment. Therefore, nanotechnology is necessary to extend the duration of action and reduce the frequency of drug usage per day. The aim of this study was to formulate metronidazole nanoparticles by the nanoprecipitation method and to evaluate their physicochemical properties. Materials and methods: Metronidazole, Eudragit RS100 polymer were used in this study. Nanoparticles containing metronidazole were prepared by the nanoprecipitation method. The factors of the formulation and manufacturing process of nanoparticles containing metronidazole were investigated. The resulting nanoparticles were characterized in terms of the particle size, polydispersed index (PDI), encapsulation efficiency, etc. Results: The nanoparticles containing metronidazole were successfully prepared with the spherical shape, the particle size of 201.9 ± 5.6 nm, PDI of 0.092 ± 0.014, and entrapment efficiency of 46.28 ± 1.18%. These nanoparticles could prolong the drug release (53.45 ± 1.49% at 24 hours). The Korsmeyer-Peppas equation best described the release kinetics of the drug from metronidazole nanoparticles. Key words: Metronidazole, nanoparticle, periodontitis

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals FORMULATION AND EVALUATION OF METFORMIN HYDROCHLORIDE LOADED FLOATING MICROSPHERES

2019 ◽  
pp. 74-82
Author(s):  
SHIKHA KESHARVANI ◽  
PANKAJ KUMAR JAISWAL ◽  
ALOK MUKERJEE ◽  
AMIT KUMAR SINGH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Compatibility Study ◽  
Specific Drug ◽  
Site Specific

Objective: The main objective of this study was to develop and evaluate the eudragit and HPMC coated metformin hydrochloride floating microspheres, in which HPMC helps in floating and eudragit as a coating material for a site-specific drug release in a controlled manner and the active moiety metformin used as anti-hyperglycemic agent. Methods: The floating microsphere was prepared by the solvent evaporation method incorporating metformin as a model drug. The prepared floating microsphere were characterized for particle size, %yield, drug loading and entrapment efficiency, compatibility study, %buoyancy, surface morphology and In vitro drug release and release kinetics. Results: The result metformin loaded floating microsphere was successfully prepared and the particle size range from 397±23.22 to 595±15.82 µm, the entrapment efficiency range from 83.49±1.33 to 60.02±1.65% and drug loading capacity range from 14.3±0.54 to 13.31±0.47% and %buoyancy range from 85.67±0.58 to 80.67±1.15%. The FT-IR and X-RD analysis confirmed that no any interaction between drug and excipient, and surface morphology confirmed those particles are sphere. The floating microsphere show maximum 96% drug release in pH 0.1N HCL and follow the Korsmeyer peppas model of the super case-2 transport mechanism. Conclusion: These results suggest that metformin loaded floating microspheres could be retain in stomach for long time and give site specific drug release in controlled manner.

scholarly journals SYNTHESIS AND CHARACTERIZATION OF THIOLATED JACKFRUIT SEED STARCH AS A COLONIC DRUG DELIVERY CARRIER

2019 ◽  
pp. 53-62 ◽  
Author(s):  
Sanjoy Das ◽  
Malay K. Das
Keyword(s):  
Drug Delivery ◽  
Release Kinetics ◽  
Drug Loading ◽  
Local Treatment ◽  
Entrapment Efficiency ◽  
Esterification Reaction ◽  
Compatibility Study ◽  
Mice Model ◽  
Drug Delivery Carrier

Objective: Site-specific drug delivery into the colonic region is extremely fascinating for local treatment of various colonic diseases like ulcerative colitis, colon cancer but it should be capable of saving the drug from hydrolysis and degradation. The present study reports the application of jackfruit seed starch and its thiol derivative as a drug delivery carrier for the colon. Methods: The starch was extracted from the jackfruit seeds by water extraction method and modified by the esterification reaction with thioglycolic acid. The thiolated starch was characterized for morphology, functional and flow properties. The safety profile of the thiolated starch was confirmed by acute toxicity study in a mice model as per OECD guidelines 423. The microspheres based on thiolated starch were prepared by ionic gelation method incorporating Ibuprofen as a model drug. The prepared microspheres were characterized for particle size, drug entrapment efficiency, drug loading, compatibility study, surface morphology, in vitro drug release and release kinetics. Results: The result attributed that starch was successfully modified by the thiolation with a degree of substitution of 3.30. The size of prepared microspheres ranges from 825.5±4.58 to 857±6.24 µm, the entrapment efficiencies ranges from 69.23±1.19 to 76.15±0.83 % and the drug loading capacity ranges from 17.75±0.30 to 46.05±0.49 %. The FT-IR, DSC and XRD studies confirmed that there is no interaction within drug and excipients. The thiolated starch microspheres show the maximum release of drug at pH 7.4 in the presence of rat caecal content as compared to pH 1.2 and pH 6.8 for up to 24 h and are following first order release kinetics. Conclusion: These results suggest the application of thiolated jackfruit seed starch could be promising as a long-term drug delivery carrier for the colon.

scholarly journals Drug Release Kinetics of Electrospun PHB Meshes

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1924 ◽  
Author(s):  
Vojtech Kundrat ◽  
Nicole Cernekova ◽  
Adriana Kovalcik ◽  
Vojtech Enev ◽  
Ivana Marova
Keyword(s):  
Release Kinetics ◽  
Entrapment Efficiency ◽  
Toxic Substances ◽  
Antimicrobial Efficiency ◽  
Vis Spectroscopy ◽  
Model Drug ◽  
Phosphate Buffered Saline ◽  
Kinetics Of

Microbial poly(3-hydroxybutyrate) (PHB) has several advantages including its biocompatibility and ability to degrade in vivo and in vitro without toxic substances. This paper investigates the feasibility of electrospun PHB meshes serving as drug delivery systems. The morphology of the electrospun samples was modified by varying the concentration of PHB in solution and the solvent composition. Scanning electron microscopy of the electrospun PHB scaffolds revealed the formation of different morphologies including porous, filamentous/beaded and fiber structures. Levofloxacin was used as the model drug for incorporation into PHB electrospun meshes. The entrapment efficiency was found to be dependent on the viscosity of the PHB solution used for electrospinning and ranged from 14.4–81.8%. The incorporation of levofloxacin in electrospun meshes was confirmed by Fourier-transform infrared spectroscopy and UV-VIS spectroscopy. The effect of the morphology of the electrospun meshes on the levofloxacin release profile was screened in vitro in phosphate-buffered saline solution. Depending upon the morphology, the electrospun meshes released about 14–20% of levofloxacin during the first 24 h. The percentage of drug released after 13 days increased up to 32.4% and was similar for all tested morphologies. The antimicrobial efficiency of all tested samples independent of the morphology, was confirmed by agar diffusion testing.

scholarly journals FORMULATION AND EVALUATION OF ETHAMBUTOL POLYMERIC NANOPARTICLES

2020 ◽  
pp. 207-217
Author(s):  
MONOWAR HUSSAIN ◽  
ANUPAM SARMA ◽  
SHEIKH SOFIUR RAHMAN ◽  
ABDUL MATIN SIDDIQUE ◽  
TANUKU PAVANI EESWARI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Compatibility Study ◽  
Bacterial Disease ◽  
Dose Frequency

Objective: Tuberculosis (TB) is an infectious bacterial disease caused by Mycobacterium tuberculosis which most commonly affects the lungs. TB has the highest mortality rate than any other infectious disease occurs worldwide. The main objective of the present investigation was to develop polymeric nanoparticles based drug delivery system to sustain the ethambutol (ETB) release by reducing the dose frequency. Methods: The Preformulation studies of drug ETB were done by physical characterization, melting point determination, and UV spectrophotometric analysis. The ETB loaded nanoparticles were prepared by double-emulsion (W/O/W) solvent evaporation/diffusion technique. The prepared polymeric nanoparticles were evaluated for particle size, polydispersity index, zeta potential, drug entrapment efficiency, drug loading, drug-polymer compatibility study, surface morphology, in vitro drug release, and release kinetics. Results: Based on the result obtained from the prepared formulations, F11 showed the best result and was selected as the optimized formulation. Optimized batch (F11) showed better entrapment efficiency (73.3%), good drug loading capacity (13.21%), optimum particle size (136.1 nm), and zeta potential (25.2 mV) with % cumulative drug release of 79.08% at the end of 24 h. Conclusion: These results attributed that developed polymeric nanoparticles could be effective in sustaining the ETB release over 24 h. Moreover, the developed nanoparticles could be an alternate method for ETB delivery with a prolonged drug release profile and a better therapeutic effect can be achieved for the treatment of tuberculosis.

Formulation and Optimization of Solid-Lipid Nano-particles of the Anticancer Drug Bortezomib

2019 ◽  
Vol 12 (2) ◽  
pp. 4461-4475
Author(s):  
Taraka Sunil Kumar K ◽  
M. Mohan Varma ◽  
Ravi Prakash P
Keyword(s):  
Release Kinetics ◽  
Drug Loading ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Cancer Drug ◽  
Solid Lipid ◽  
Zero Order Release ◽  
Presystemic Metabolism

Solid-lipid nanoparticles (SLNs) are an alternative carrier system used for loading the drug for targeting, improving the bioavailability by increasing its solubility, and protecting the drug from presystemic metabolism. The avoidance of presystemic metabolism is due to the nanometric size range so that the liver cannot uptake the drug from the delivery system and is not metabolized by the liver. Bortezomib is an anti-cancer drug. Due to its poor oral bioavailability, presystemic metabolism and decreased half-life, it was chosen to formulate as the SLN system with the use of a 3-factor, 3-level Box–Behnken design, by hot homogenization followed by an ultrasonication method. Trimyristin (Dynasan-114), tripalmitin (Dynasan 116) and tristearin (Dynasan-118) were used as lipids and based on the results from the initial studies tripalmitin (Dynasan116) was selected as the lipid for the further studies along with phosphatidylcholine as surfactant and Poloxamer 188 as stabilizer. The optimized formulation (F1) was obtained with minimum particle size (204 nm), maximum entrapment efficiency (70.24) and drug loading (21.24). The optimised batches were further investigated by FTIR, DSC, XRD, SEM and stability. In vitro release studies showed that maximum cumulative drug release was obtained for F1 (99.74%). The optimized formulation Bortezomib followed zero-order release kinetics with a strong correlation coefficient (R2= 0.9994). The nanoformulation prepared under optimized conditions is in concurrence with the expected results. It is concluded that the SLN formulation can be used as a potential carrier for the effective delivery of Bortezomib.

Crosslinked Chitosan/PVA Film, Suturated with 5- Fluorouracil for The Prevention of Proliferative Vitreoretinopathy

2016 ◽  
Vol 6 (2) ◽  
Author(s):  
Baiyrkhanova A. ◽  
Ismailova A. ◽  
Botabekova T. ◽  
Enin E. ◽  
Semenova Y.
Keyword(s):  
Proliferative Vitreoretinopathy ◽  
Release Kinetics ◽  
Drug Loading ◽  
In Vitro Release ◽  
Chemical Compositions ◽  
Ophthalmic Administration ◽  
Model Drug ◽  
Kinetics Of

5-Fluorouracil (5-FU)-loaded chitosan (Ch) film for chemotherapy were prepared applying a superhydrophobic surfacebased encapsulation technology. The aim of this study was to develop polymeric film with glutaraldehyde (GA) of controlled drug delivery systems for 5 – fluorouracil (FU) as a model drug for the treatment of proliferative vitreoretinopathy. Polymer film of chitosan and polyvinyl alcohol (PVA in 75:25 ratios were prepared and treated with GA. FTIR spectra of 5-FU, Ch/5-FU and Ch/PVA film loaded 5-FU were studied. Physical characteristics such as thickness and swelling coefficient of the film were performed. The thermal of the Ch/PVA film was studied with thermogravimethric analysis. The drug loading efficiency, film size and chemical compositions of the film loaded drug were confirmed by UV–vis spectrophotometer and Fourier transform infrared spectroscopy. In vitro release kinetics of drug from the polymeric films was investigated to determine the drug release properties. In vivo study of PVR was showed the efficacy and no toxicity of this formulation. Further uses of the film loaded 5 - fluorouracil may provide an efficiency deliverable for ophthalmic administration.

scholarly journals FORMULATION AND EVALUATION OF LYCOPENE LOADED COLLOIDAL MICROPARTICLES GEL

2019 ◽  
pp. 165-170 ◽  
Author(s):  
MONISHA BANSAL ◽  
MANPREET KAUR WALIA ◽  
GURFATEH SINGH ◽  
S. L. HARIKUMAR
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
Ethyl Cellulose ◽  
Release Kinetics ◽  
Drug Loading ◽  
Surfactant Solution ◽  
Entrapment Efficiency ◽  
Topical Formulation ◽  
Tween 40 ◽  
Tween 60

Objective: The objective of the present investigation was to design and evaluate a gel containing lycopene loaded colloidal microparticles. Methods: The lycopene loaded colloidal microparticles were successfully prepared by Cloud point technique to form colloids using Tween 40 and Tween 60 surfactant solution and then incorporated into microparticles by solvent evaporation method using polymer like HPMC and ethyl cellulose. These colloidal microparticles were evaluated for particle size (PS), drug loading (DL), entrapment efficiency (EE), Scanning Electron Microscopy (SEM). Further, these colloidal microparticles were incorporated into a topical formulation i.e., gel. This topical formulation was then evaluated for macroscopic examination, viscosity, drug content, spreadability, antioxidant activity, in vitro permeation and release kinetics. Results: Colloidal microparticles were successfully prepared and the particle size, drug loading and entrapment efficiency were found to be 249.45±14.2 μm, 49.8±0.96 % and 93.4±0.26 % respectively. FTIR study depicted no chemical interaction between pure drug lycopene and other excipients. The topical formulation showed sustained release and followed Korsmeyer-Peppas release kinetics model. Conclusion: The sustained release topical formulation of lycopene was successfully prepared using Tween 40 and Tween 60 surfactant solution and combination of HPMC and ethyl cellulose and evaluated for several parameters.

Sign in / Sign up

Export Citation Format

Share Document