scholarly journals FORMULATION AND EVALUATION OF ETHAMBUTOL POLYMERIC NANOPARTICLES

2020 ◽  
pp. 207-217
Author(s):  
MONOWAR HUSSAIN ◽  
ANUPAM SARMA ◽  
SHEIKH SOFIUR RAHMAN ◽  
ABDUL MATIN SIDDIQUE ◽  
TANUKU PAVANI EESWARI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Compatibility Study ◽  
Bacterial Disease ◽  
Dose Frequency

Objective: Tuberculosis (TB) is an infectious bacterial disease caused by Mycobacterium tuberculosis which most commonly affects the lungs. TB has the highest mortality rate than any other infectious disease occurs worldwide. The main objective of the present investigation was to develop polymeric nanoparticles based drug delivery system to sustain the ethambutol (ETB) release by reducing the dose frequency. Methods: The Preformulation studies of drug ETB were done by physical characterization, melting point determination, and UV spectrophotometric analysis. The ETB loaded nanoparticles were prepared by double-emulsion (W/O/W) solvent evaporation/diffusion technique. The prepared polymeric nanoparticles were evaluated for particle size, polydispersity index, zeta potential, drug entrapment efficiency, drug loading, drug-polymer compatibility study, surface morphology, in vitro drug release, and release kinetics. Results: Based on the result obtained from the prepared formulations, F11 showed the best result and was selected as the optimized formulation. Optimized batch (F11) showed better entrapment efficiency (73.3%), good drug loading capacity (13.21%), optimum particle size (136.1 nm), and zeta potential (25.2 mV) with % cumulative drug release of 79.08% at the end of 24 h. Conclusion: These results attributed that developed polymeric nanoparticles could be effective in sustaining the ETB release over 24 h. Moreover, the developed nanoparticles could be an alternate method for ETB delivery with a prolonged drug release profile and a better therapeutic effect can be achieved for the treatment of tuberculosis.

scholarly journals FORMULATION AND EVALUATION OF METFORMIN HYDROCHLORIDE LOADED FLOATING MICROSPHERES

2019 ◽  
pp. 74-82
Author(s):  
SHIKHA KESHARVANI ◽  
PANKAJ KUMAR JAISWAL ◽  
ALOK MUKERJEE ◽  
AMIT KUMAR SINGH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Compatibility Study ◽  
Specific Drug ◽  
Site Specific

Objective: The main objective of this study was to develop and evaluate the eudragit and HPMC coated metformin hydrochloride floating microspheres, in which HPMC helps in floating and eudragit as a coating material for a site-specific drug release in a controlled manner and the active moiety metformin used as anti-hyperglycemic agent. Methods: The floating microsphere was prepared by the solvent evaporation method incorporating metformin as a model drug. The prepared floating microsphere were characterized for particle size, %yield, drug loading and entrapment efficiency, compatibility study, %buoyancy, surface morphology and In vitro drug release and release kinetics. Results: The result metformin loaded floating microsphere was successfully prepared and the particle size range from 397±23.22 to 595±15.82 µm, the entrapment efficiency range from 83.49±1.33 to 60.02±1.65% and drug loading capacity range from 14.3±0.54 to 13.31±0.47% and %buoyancy range from 85.67±0.58 to 80.67±1.15%. The FT-IR and X-RD analysis confirmed that no any interaction between drug and excipient, and surface morphology confirmed those particles are sphere. The floating microsphere show maximum 96% drug release in pH 0.1N HCL and follow the Korsmeyer peppas model of the super case-2 transport mechanism. Conclusion: These results suggest that metformin loaded floating microspheres could be retain in stomach for long time and give site specific drug release in controlled manner.

scholarly journals FORMULATION AND EVALUATION OF DASATINIB LOADED SOLID LIPID NANOPARTICLES

2018 ◽  
Vol 10 (12) ◽  
pp. 14 ◽  
Author(s):  
M. Yasmin Begum ◽  
Prathyusha Reddy Gudipati
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Size Analysis ◽  
Compatibility Study ◽  
Solid Lipid ◽  
Poly Dispersity Index

Objective: The aim of present work was to formulate and evaluate Dasatinib (DST) loaded solid lipid nanoparticles (SLNs) as a potential anticancer drug delivery system by enhancing its solubility.Methods: SLNs consist of a solid lipid matrix where the drug was incorporated. Surfactants of GRAS grade were used to avoid aggregation and to stabilize the SLNs. DST-SLNs formulations of varying concentrations were prepared by high speed homogenization technique and evaluated for drug excipients compatibility study, poly-dispersity index, particle size analysis, surface morphology, zeta potential and drug release features.Results: It was observed that DST-SLNs with optimum quantities of poloxomer: lecithin ratio showed 88.06% drug release in 6h with good entrapment efficiency of 76.9±0.84 %. Particle size, Poly dispersity index, zeta potential and drug entrapment efficiency for the optimized formulation was found to be optimum. Stability studies revealed that the entrapment efficiency of the SLN dispersion stored in 4 °C was stable.Conclusion: Thus, it can be concluded that formulations of DST loaded SLNs are suitable carriers for improving the solubility and dissolution related problems. 

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

scholarly journals FORMULATION AND CHARACTERIZATION OF TIMOLOL MALEATE-LOADED NANOPARTICLES GEL BY IONIC GELATION METHOD USING CHITOSAN AND SODIUM ALGINATE

2019 ◽  
pp. 48-54 ◽  
Author(s):  
RISA AHDYANI ◽  
LARAS NOVITASARI ◽  
RONNY MARTIEN
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Ionic Gelation ◽  
Timolol Maleate ◽  
Optimum Formula

Objective: The objectives of this study were to formulate and characterize nanoparticles gel of timolol maleate (TM) by ionic gelation method using chitosan (CS) and sodium alginate (SA). Methods: Optimization was carried out by factorial design using Design Expert®10.0.1 software to obtain the concentration of CS, SA, and calcium chloride (CaCl2) to produce the optimum formula of TM nanoparticles. The optimum formula was characterized for particle size, polydispersity index, entrapment efficiency, Zeta potential, and molecular structure. Hydroxy Propyl Methyl Cellulose (HPMC) K15 was incorporated into optimum formula to form nanoparticles gel of TM and carried out in vivo release study using the Franz Diffusion Cell. Results: TM nanoparticles was successfully prepared with concentration of CS, SA, and CaCl2 of 0.01 % (w/v), 0.1 % (w/v), and 0.25 % (w/v), respectively. The particle size, polydispersity index, entrapment efficiency, and Zeta potential were found to be 200.47±4.20 nm, 0.27±0.0154, 35.23±4.55 %, and-5.68±1.80 mV, respectively. The result of FTIR spectra indicated TM-loaded in the nanoparticles system. In vitro release profile of TM-loaded nanoparticles gel showed controlled release and the Korsmeyer-Peppas model was found to be the best fit for drug release kinetics. Conclusion: TM-loaded CS/SA nanoparticles gel was successfully prepared and could be considered as a promising candidate for controlled TM delivery of infantile hemangioma treatment.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals Fabrication and in vitro characterization of polymeric nanoparticles for Parkinson's therapy: a novel approach

2014 ◽  
Vol 50 (4) ◽  
pp. 869-876 ◽  
Author(s):  
Neha Gulati ◽  
Upendra Nagaich ◽  
Shubhini Saraf
Keyword(s):  
Drug Release ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Mode Of Delivery ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Novel Approach

The objective of the research was to formulate and evaluate selegiline hydrochloride loaded chitosan nanoparticles for the Parkinson's therapy in order to improve its therapeutic effect and reducing dosing frequency. Taguchi method of design of experiments (L9 orthogonal array) was used to get optimized formulation. The selegiline hydrochloride loaded chitosan nanoparticles (SHPs) were prepared by ionic gelation of chitosan with tripolyphosphate anions (TPP) and tween 80 as surfactant. The SHPs had a mean size of (303.39 ± 2.01) nm, a zeta potential of +32.50mV, and entrapment efficiency of SHPs was 86.200 ± 1.38%. The in vitro drug release of SHPs was evaluated in phosphate buffer saline (pH 5.5) using goat nasal mucosa and found to be 82.529% ± 1.308 up to 28 h. Release kinetics studies showed that the release of drug from nanoparticles was anomalous (non-fickian) diffusion indicating the drug release is controlled by more than one process i.e. superposition of both phenomenon, the diffusion controlled as well as swelling controlled release. SHPs showed good stability results as found during stability studies at different temperatures as mentioned in ICH guidelines. The results revealed that selegiline hydrochloride loaded chitosan nanoparticles are most suitable mode of delivery of drug for promising therapeutic action.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

Sign in / Sign up

Export Citation Format

Share Document