scholarly journals Comparison of Accuracy of Artificial Neural Network (ANN) and Kriging Methods for Estimating Chlorine Concentration

10.29007/lpmh ◽  
2018 ◽  
Author(s):  
Faezeh Ghaleh Navi ◽  
Hamed Mazandarani Zadeh ◽  
Dragan Savic
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Kriging Model ◽  
Coefficient Of Determination ◽  
Monthly Basis ◽  
Data Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Observation Wells

Groundwater is one of the major sources of fresh water. Maintenance and management of this vital resource is so important especially in arid and semi-arid regions. Reliable and accurate groundwater quality assessment is essential as a basic data for any groundwater management studies. The aim of this study is to compare the accuracy of two Artificial Neural Network (ANN) and Kriging methods in predicting chlorine in groundwater. In case of ANN, we created an appropriate emulator, which minimize the prediction error by changing the parameters of the neural network, including the number of layers. The best Kriging model is also obtained by changing the variogram function, such that the Gaussian variogram has the least error in interpolation of the amount of chlorine. To evaluate the accuracy of these two methods, the mean square error (MSE) and Coefficient of determination (R2) are used. The data set consists of the amount of chlorine, in a monthly basis, measured at 112 observation wells from 1999 to 2015 in aquifer Qazvin, Iran. MSE values for ANN and Kriging are 14.8 and 15.4, respectively, which indicate that the ANN has a better performance and is more capable of predicting chlorine values in comparison with Kriging.

A Model on the Correlation between Composition and Mechanical Properties of Mg-Al-Zn Alloys by Using Artificial Neural Network

2005 ◽  
Vol 488-489 ◽  
pp. 793-796 ◽  
Author(s):  
Hai Ding Liu ◽  
Ai Tao Tang ◽  
Fu Sheng Pan ◽  
Ru Lin Zuo ◽  
Ling Yun Wang
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Magnesium Alloys ◽  
Tensile Yield Strength ◽  
Data Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Prediction Of Mechanical Properties ◽  
Artificial Neural Network Ann

A model was developed for the analysis and prediction of correlation between composition and mechanical properties of Mg-Al-Zn (AZ) magnesium alloys by applying artificial neural network (ANN). The input parameters of the neural network (NN) are alloy composition. The outputs of the NN model are important mechanical properties, including ultimate tensile strength, tensile yield strength and elongation. The model is based on multilayer feedforward neural network. The NN was trained with comprehensive data set collected from domestic and foreign literature. A very good performance of the neural network was achieved. The model can be used for the simulation and prediction of mechanical properties of AZ system magnesium alloys as functions of composition.

Random Forest (RF) and Artificial Neural Network (ANN) Algorithms for LULC Mapping

2020 ◽  
Vol 38 (4A) ◽  
pp. 510-514
Author(s):  
Tay H. Shihab ◽  
Amjed N. Al-Hameedawi ◽  
Ammar M. Hamza
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Artificial Neural Network ◽  
Random Forest ◽  
Satellite Image ◽  
Landsat 8 ◽  
Optical Remote Sensing ◽  
Data Set ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this paper to make use of complementary potential in the mapping of LULC spatial data is acquired from LandSat 8 OLI sensor images are taken in 2019.  They have been rectified, enhanced and then classified according to Random forest (RF) and artificial neural network (ANN) methods. Optical remote sensing images have been used to get information on the status of LULC classification, and extraction details. The classification of both satellite image types is used to extract features and to analyse LULC of the study area. The results of the classification showed that the artificial neural network method outperforms the random forest method. The required image processing has been made for Optical Remote Sensing Data to be used in LULC mapping, include the geometric correction, Image Enhancements, The overall accuracy when using the ANN methods 0.91 and the kappa accuracy was found 0.89 for the training data set. While the overall accuracy and the kappa accuracy of the test dataset were found 0.89 and 0.87 respectively.

Watermelon Sorting Process by Frequency Identification and Artificial Neural Network

2021 ◽  
Author(s):  
Komsan Wongkalasin ◽  
Teerapon Upachaban ◽  
Wacharawish Daosawang ◽  
Nattadon Pannucharoenwong ◽  
Phadungsak Ratanadecho
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Selection Process ◽  
Network Processor ◽  
Data Set ◽  
The Neural Network ◽  
Frequency Identification ◽  
Sorting Process ◽  
Artificial Neural ◽  
Reasonable Prediction

This research aims to enhance the watermelon’s quality selection process, which was traditionally conducted by knocking the watermelon fruit and sort out by the sound’s character. The proposed method in this research is generating the sound spectrum through the watermelon and then analyzes the response signal’s frequency and the amplitude by Fast Fourier Transform (FFT). Then the obtained data were used to train and verify the neural network processor. The result shows that, the frequencies of 129 and 172 Hz were suit to be used in the comparison. Thirty watermelons, which were randomly selected from the orchard, were used to create a data set, and then were cut to manually check and match to the fruits’ quality. The 129 Hz frequency gave the response ranging from 13.57 and above in 3 groups of watermelons quality, including, not fully ripened, fully ripened, and close to rotten watermelons. When the 172 Hz gave the response between 11.11–12.72 in not fully ripened watermelons and those of 13.00 or more in the group of close to rotten and hollow watermelons. The response was then used as a training condition for the artificial neural network processor of the sorting machine prototype. The verification results provided a reasonable prediction of the ripeness level of watermelon and can be used as a pilot prototype to improve the efficiency of the tools to obtain a modern-watermelon quality selection tool, which could enhance the competitiveness of the local farmers on the product quality control.

scholarly journals Modeling of daily runoff from a small agricultural watershed using artificial neural network with resampling techniques

2014 ◽  
Vol 17 (1) ◽  
pp. 56-74 ◽  
Author(s):  
Gurjeet Singh ◽  
Rabindra K. Panda ◽  
Marc Lamers
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Agricultural Watershed ◽  
Training Data ◽  
Optimum Number ◽  
Training Process ◽  
Data Set ◽  
Reported Study ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The reported study was undertaken in a small agricultural watershed, namely, Kapgari in Eastern India having a drainage area of 973 ha. The watershed was subdivided into three sub-watersheds on the basis of drainage network and land topography. An attempt was made to relate the continuously monitored runoff data from the sub-watersheds and the whole-watershed with the rainfall and temperature data using the artificial neural network (ANN) technique. The reported study also evaluated the bias in the prediction of daily runoff with shorter length of training data set using different resampling techniques with the ANN modeling. A 10-fold cross-validation (CV) technique was used to find the optimum number of hidden neurons in the hidden layer and to avoid neural network over-fitting during the training process for shorter length of data. The results illustrated that the ANN models developed with shorter length of training data set avoid neural network over-fitting during the training process, using a 10-fold CV method. Moreover, the biasness was investigated using the bootstrap resampling technique based ANN (BANN) for short length of training data set. In comparison with the 10-fold CV technique, the BANN is more efficient in solving the problems of the over-fitting and under-fitting during training of models for shorter length of data set.

scholarly journals Artificial neural network classification-based skin cancer detection

2017 ◽  
Vol 7 (1.1) ◽  
pp. 591
Author(s):  
M. Shyamala Devi ◽  
A.N. Sruthi ◽  
P. Balamurugan
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Skin Cancer ◽  
Back Propagation ◽  
Modern Technology ◽  
Data Set ◽  
Processing Strategies ◽  
Skin Cancers ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

At present, skin cancers are extremely the most severe and life-threatening kind of cancer. The majority of the pores and skin cancers are completely remediable at premature periods. Therefore, a premature recognition of pores and skin cancer can effectively protect the patients. Due to the progress of modern technology, premature recognition is very easy to identify. It is not extremely complicated to discover the affected pores and skin cancers with the exploitation of Artificial Neural Network (ANN). The treatment procedure exploits image processing strategies and Artificial Intelligence. It must be noted that, the dermoscopy photograph of pores and skin cancer is effectively determined and it is processed to several pre-processing for the purpose of noise eradication and enrichment in image quality. Subsequently, the photograph is distributed through image segmentation by means of thresholding. Few components distinctive for skin most cancers regions. These features are mined the practice of function extraction scheme - 2D Wavelet Transform scheme. These outcomes are provides to the Back-Propagation Neural (BPN) Network for effective classification. This completely categorizes the data set into either cancerous or non-cancerous. 

scholarly journals Analysing 21cm signal with artificial neural network

2017 ◽  
Vol 12 (S333) ◽  
pp. 39-42
Author(s):  
Hayato Shimabukuro ◽  
Benoit Semelin
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Power Spectrum ◽  
Machine Learning Techniques ◽  
Inversion Method ◽  
Observation Data ◽  
The Neural Network ◽  
Learning Techniques ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

AbstractThe 21cm signal at epoch of reionization (EoR) should be observed within next decade. We expect that cosmic 21cm signal at the EoR provides us both cosmological and astrophysical information. In order to extract fruitful information from observation data, we need to develop inversion method. For such a method, we introduce artificial neural network (ANN) which is one of the machine learning techniques. We apply the ANN to inversion problem to constrain astrophysical parameters from 21cm power spectrum. We train the architecture of the neural network with 70 training datasets and apply it to 54 test datasets with different value of parameters. We find that the quality of the parameter reconstruction depends on the sensitivity of the power spectrum to the different parameter sets at a given redshift and also find that the accuracy of reconstruction is improved by increasing the number of given redshifts. We conclude that the ANN is viable inversion method whose main strength is that they require a sparse extrapolation of the parameter space and thus should be usable with full simulation.

Prediction of Detonation Pressure of Aluminized Explosive by Artificial Neural Network

2013 ◽  
Vol 641-642 ◽  
pp. 460-463
Author(s):  
Yong Gang Liu ◽  
Xin Tian ◽  
Yue Qiang Jiang ◽  
Gong Bing Li ◽  
Yi Zhou Li
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Optimal Condition ◽  
Detonation Pressure ◽  
Ann Model ◽  
Training Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Good Agreement

In this study, a three-layer artificial neural network(ANN) model was constructed to predict the detonation pressure of aluminized explosive. Elemental composition and loading density were employed as input descriptors and detonation pressure was used as output. The dataset of 41 aluminized explosives was randomly divided into a training set (30) and a prediction set (11). After optimized by adjusting various parameters, the optimal condition of the neural network was obtained. Simulated with the final optimum neural network [6–9–1], calculated detonation pressures show good agreement with experimental results. It is shown here that ANN is able to produce accurate predictions of the detonation pressure of aluminized explosive.

scholarly journals Classification of EMG signal for multiple hand gestures based on neural network

2020 ◽  
Vol 17 (1) ◽  
pp. 256 ◽  
Author(s):  
Mohd Azlan Abu ◽  
Syazwani Rosleesham ◽  
Mohd Zubir Suboh ◽  
Mohd Syazwan Md Yid ◽  
Zainudin Kornain ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Invasive Technique ◽  
Hand Gestures ◽  
Emg Signal ◽  
The Neural Network ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Hidden Neurons

<span>This paper presents the classification of EMG signal for multiple hand gestures based on neural network. In this study, the Electromyography is used to measure the muscle cell’s electrical activities which is commonly represented in a function time. Every muscle has their own signals, which was produced in every movement. Surface electromyography (sEMG) is used as a non-invasive technique for acquiring the EMG signal. The development of sensors’ detection and measuring the EMG have been improved and have become more precise while maintaining a small size. In this paper, the main objective is to identify the hand gestures based on: (1) Cylindrical Grasp, (2) Supination (Twist Left), (3) Pronation (Twist Right), (4) Resting Hand and (5) Open Hand that are predefined by using Arduino IDE, CoolTerm software and Microsoft Excel before using artificial neural network for classifying purposes in MATLAB. Finally, the extraction of the EMG patterns for each movement went through features extraction of the signals which is used to train the classifier in MATLAB to classify signals in the neural network. The features extracted are using mean absolute value (MAV), median, waveform length (WL) and root mean square (RMS). The Artificial Neural Network (ANN) produced accuracy of 80% for training and testing for 10 hidden neurons layer.</span>

scholarly journals Utilizing Soft Computing for Determining Protein Deficiency

2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Sri Hartati ◽  
Sri Nurdiati
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Protein Deficiency ◽  
Growth Delay ◽  
Backpropagation Neural Network ◽  
Data Set ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Result Analysis ◽  
Early Diagnose

Abstract— In recent years, the occurrence of protein shortage of children under 5 years old in many poor area has dramatically increased. Since this situation can cause serious problem to children like a delay in their growth, delay in their development and also disfigurement, disability, dependency, the early diagnose of protein shortage is vital. Many applications have been developed in performing disease detection such as an expert system for diagnosing diabetics and artificial neural network (ANN) applications for diagnosing breast cancer, acidosis diseases, and lung cancer. This paper is mainly focusing on the development of protein shortage disease diagnosing application using Backpropagation Neural Network (BPNN) technique. It covers two classes of protein shortage that are Heavy Protein Deficiency. On top of this, a BPNN model is constructed based on result analysis of the training and testing from the developed application. The model has been successfully tested using new data set. It shows that the BPNN is able to early diagnose heavy protein deficiency accurately. Keywords— Artificial Neural Network, Backpropagation Neural Network, Protein Deficiency.

scholarly journals The Use of an Artificial Neural Network for Predicting the Gloss of Thermally Densified Wood Veneers

2021 ◽  
Vol 27 (2) ◽  
Author(s):  
Şükrü Özşahin ◽  
Hilal Singer
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Model Performance ◽  
Coefficient Of Determination ◽  
Densified Wood ◽  
Percentage Error ◽  
Angle Of Incidence ◽  
Ann Model ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this study, an artificial neural network (ANN) model was developed to predict the gloss of thermally densified wood veneers. A custom application created with MATLAB codes was employed for the development of the multilayer feed-forward ANN model. The wood species, temperature, pressure, measurement direction, and angle of incidence were considered as the model inputs, while the gloss was the output of the ANN model. Model performance was evaluated by using the mean absolute percentage error (MAPE), the root mean square error (RMSE), and the coefficient of determination (R²). It was observed that the ANN model yielded very satisfactory results with acceptable deviations. The MAPE, RMSE, and R2 values of the testing period of the ANN model were found as 8.556%, 1.245, and 0.9814, respectively. Consequently, this study could be useful for the wood industry to predict the gloss with less number of tiring experimental activities.

Sign in / Sign up

Export Citation Format

Share Document