scholarly journals DETERMINATION OF THE REAL VALUES OF KINEMATIC INDEX CORRESPONDING TO THE MECHANICAL SEPARATION PROCESS

2017 ◽  
Vol 22 (2) ◽  
Author(s):  
EMILIAN MOȘNEGUȚU ◽  
VALENTIN NEDEFF ◽  
MIRELA PANAINTE-LEHĂDUȘ ◽  
NARCIS BÂRSAN ◽  
DANA CHIȚIMUȘ ◽  
...  
Keyword(s):  
Separation Process ◽  
Experimental Batch ◽  
Solid Particles ◽  
Common Method ◽  
The Real ◽  
Mechanical Separation

This article presents the methodology for determining the real values of kinematic indices which characterizes the mechanical separation of a mixture of solid particles. Mechanical separation of a mixture of solid-solid on surface provided with holes is the most common method of separation. To optimize equipment that performs this operation, both theoretical and practical characteristics are determined. Kinematic indices are part of the theoretical characteristics, helping to identify behavior of solid particles on a surface flat swing. Starting from an experimental batch, real values of the kinematic indices corresponding to up, down and sideways movement on the sieve were determined for the following types of real particles: grain, large grain beans, small grain beans and soybeans.

scholarly journals DETERMINATION OF THE REAL VALUES OF KINEMATIC INDEX CORRESPONDING TO THE MECHANICAL SEPARATION PROCESS

2016 ◽  
Vol 22 (2) ◽  
pp. 39-48
Author(s):  
EMILIAN MOȘNEGUȚU ◽  
VALENTIN NEDEFF ◽  
MIRELA PANAINTE-LEHĂDUȘ ◽  
NARCIS BÂRSAN ◽  
DANA CHIȚIMUȘ ◽  
...  
Keyword(s):  
Separation Process ◽  
Experimental Batch ◽  
Solid Particles ◽  
Common Method ◽  
The Real ◽  
Mechanical Separation

This article presents the methodology for determining the real values of kinematic indices which characterizes the mechanical separation of a mixture of solid particles. Mechanical separation of a mixture of solid-solid on surface provided with holes is the most common method of separation. To optimize equipment that performs this operation, both theoretical and practical characteristics are determined. Kinematic indices are part of the theoretical characteristics, helping to identify behavior of solid particles on a surface flat swing. Starting from an experimental batch, real values of the kinematic indices corresponding to up, down and sideways movement on the sieve were determined for the following types of real particles: grain, large grain beans, small grain beans and soybeans.

Mechanical Separation Process and Flow Patterns of Cyclone Dust Collectors

1997 ◽  
Vol 50 (3) ◽  
pp. 97-130 ◽  
Author(s):  
Akira Ogawa
Keyword(s):  
Gas Flow ◽  
Tangential Velocity ◽  
Axial Flow ◽  
Review Article ◽  
Separation Process ◽  
Solid Particles ◽  
Dust Collector ◽  
Separation Mechanism ◽  
Flow Type ◽  
Mechanical Separation

A cyclone dust collector (called herein a cyclone) is applied in many industrial fields, for example, powder technology, combustion chambers, various chemical plants, etc. Until now, there are many types of cyclones for the purpose of separation of solid particles; however generally-speaking, the following types of the cyclone are typical: returned flow or reversed flow type, axial flow type, and rotary flow cyclone with tangential injection of the second gas flow to the cyclone body. In order to understand the performance of the cyclone and the problems of turbulent rotational flow and the separation mechanism for solid particles, this review article describes the flow pattern and distribution of the tangential velocity for pure gas flow and for dust laden gas flow, which are most important factors for estimating the pressure drop and the separation characteristics of the solid particles, and also the mechanical separation process in the centrifugal flow field. This review article includes 162 references.

scholarly journals Determination of macro-scale soil properties from pore-scale structures: model derivation

2018 ◽  
Vol 474 (2209) ◽  
pp. 20170141 ◽  
Author(s):  
K. R. Daly ◽  
T. Roose
Keyword(s):  
Pore Space ◽  
Solid Particles ◽  
Underlying Structure ◽  
Pore Scale ◽  
Homogenization Procedure ◽  
Macro Scale ◽  
Model Derivation ◽  
Scale Structures ◽  
Homogenization Scheme

In this paper, we use homogenization to derive a set of macro-scale poro-elastic equations for soils composed of rigid solid particles, air-filled pore space and a poro-elastic mixed phase. We consider the derivation in the limit of large deformation and show that by solving representative problems on the micro-scale we can parametrize the macro-scale equations. To validate the homogenization procedure, we compare the predictions of the homogenized equations with those of the full equations for a range of different geometries and material properties. We show that the results differ by ≲ 2 % for all cases considered. The success of the homogenization scheme means that it can be used to determine the macro-scale poro-elastic properties of soils from the underlying structure. Hence, it will prove a valuable tool in both characterization and optimization.

Determination of Chitosan Oligosaccharide Content by Acetylacetone Spectrophotometry Method

2012 ◽  
Vol 503-504 ◽  
pp. 543-547 ◽  
Author(s):  
Ze Ping Xu ◽  
Chuan Lun Yang ◽  
Xin Qing Zhang ◽  
Xiu Zhi Wang ◽  
Bao Sheng Huang
Keyword(s):  
Hydrochloric Acid ◽  
Linear Relationship ◽  
Regression Equation ◽  
Common Method ◽  
Chitosan Oligosaccharide ◽  
Average Recovery ◽  
Good Linear ◽  
Good Linear Relationship

Objective: To establish a common method to detect the content of chitosan oligosaccharide. Methods: Chitosan oligosaccharide was hydrolyzed completely by concentrated hydrochloric acid, and the solution was regulated into neutral with NaOH. Then, determined the absorbance in 525nm, and substituted into the regression equation to determine the results. Results: The results showed there was a good linear relationship when the concentration of chitosan oligosaccharide ranged from 0.02 mg/mL to 0.12 mg/mL, r2 = 0.999. The average recovery of chitosan oligosaccharide samples was 99.25%. Conclusion: The method is sensitive, accurate and simple. It is applied to determine of the content of chitosan oligosaccharide.

Experimental Determination of Statistical Properties of Two-Phase Turbulent Motion

1960 ◽  
Vol 82 (3) ◽  
pp. 609-621 ◽  
Author(s):  
S. L. Soo ◽  
H. K. Ihrig ◽  
A. F. El Kouh
Keyword(s):  
Gas Phase ◽  
Tracer Diffusion ◽  
Statistical Properties ◽  
Solid Particles ◽  
Turbulent Motion ◽  
Two Phase ◽  
Gaseous State ◽  
Diffusion Technique ◽  
And Diffusion

Experimental methods for the determination of certain statistical properties of turbulent conveyance and diffusion of solid particles in a gaseous state are presented. Methods include a tracer-diffusion technique for the determination of gas-phase turbulent motion and a photo-optical technique for the determination of motion of solid particles. Results are discussed and compared with previous analytical results.

scholarly journals RESEARCH OF THE TENSELY-DEFORMED STATE OF ELEMENTS OF MOBILE HEAT STORAGE

2020 ◽  
Vol 42 (2) ◽  
pp. 68-75
Author(s):  
V.G. Demchenko ◽  
А.S. Тrubachev ◽  
A.V. Konyk
Keyword(s):  
Mathematical Model ◽  
Heat Storage ◽  
Quantitative Estimation ◽  
The Real ◽  
State Of The Union ◽  
Real Geometry ◽  
Deformed State ◽  
The Mathematical Model ◽  
Minimization Of Functional

Worked out methodology of determination of the tensely-deformed state of elements of mobile heat storage of capacity type, that works in the real terms of temperature and power stress on allows to estimate influence of potential energy on resilient deformation that influences on reliability of construction and to give recommendations on planning of tank (capacities) of accumulator. For determination possibly of possible tension of construction of accumulator kinematics maximum terms were certain. As a tank of accumulator shows a soba the difficult geometrical system, the mathematical model of calculation of coefficient of polynomial and decision of task of minimization of functional was improved for determination of tension for Міzеs taking into account the real geometry of equipment. Conducted quantitative estimation of the tensely-deformed state of the union coupling, corps and bottom of thermal accumulator and the resource of work of these constructions is appraised. Thus admissible tension folds 225 МРа.

scholarly journals Determination of the Precise Coordinates of the GPS Reference Station in of a GBAS System in the Air Transport

2020 ◽  
Vol 22 (3) ◽  
pp. 11-18
Author(s):  
Kamil Krasuski ◽  
Stepan Savchuk
Keyword(s):  
Mathematical Model ◽  
Measurement Technique ◽  
Air Transport ◽  
Reference Station ◽  
The Real ◽  
Station Coordinates ◽  
Geocentric Coordinates

This paper presents results of research concerning determination of the GPS reference station coordinates located on the grounds of an EPDE airport in Deblin. The study uses a mathematical model of the PPP measurement technique in order to determine the coordinates of the reference station using the real GPS code-phase observations. The computations of the coordinates of the GPS reference station were carried out in numerical applications CSRS-PPP, APPS and GAPS. In this research was found that the accuracy of finding solutions to the XYZ geocentric coordinates of the reference station REF1 between solutions CSRS-PPP, APPS and GAPS ranges from 0.01m to 0.13m. In addition, the accuracy of determining the XYZ geocentric coordinates from the PPP method related to the GPS differential solution ranged from 0.01m to 0.11m.

Sign in / Sign up

Export Citation Format

Share Document