scholarly journals Prototype Alat Pengendali Lampu dengan Perintah Suara menggunakan Arduino Uno Berbasis Web

2019 ◽  
Vol 3 (3) ◽  
pp. 389-394
Author(s):  
Nurul Isna Ganggalia ◽  
Apri Junaidi ◽  
Fahrudin Mukti Wibowo
Keyword(s):  
Control System ◽  
Response Time ◽  
Success Rate ◽  
Noise Level ◽  
Light Control ◽  
Test Drive ◽  
Development Method ◽  
Prototype Development ◽  
Arduino Uno ◽  
The Web

The use of electric power for lights often less considered, a lot of lights are on continuously even though it's not used. As a result, a lot of electricity is wasted. This motivated researchers to create innovations of creating a light control system. The light controller system is designed to simplify and benefit the user. For this reason, researchers make light controllers on the web use voice commands that can be done anywhere and anytime using the internet. Making a prototype of a light control system with voice commands utilizes speech to text on the Web Speech API that converts sound into text, then it will be processed into a command of light controllers by the Arduino Uno microcontroller. The researcher used the prototype development method, where through 3 stages starting from Listen to Customer, Design and Building, and Test Drive Evaluations. The testing results are Internet speed and noise level affect the success rate on the use of light control using sound. At 9.9 Mbps internet speed has a success rate of 86% with response time 2.01 second, while at internet speed 1.9 Mbps has a success rate of 65% with response time 2.50 second. At the noise level of 34.5 dB room has a success rate of 86% with response time 2.02 second, while the noise level of 62 dB has a success rate of 72% with response time 2.21 second.

scholarly journals Smart Home Pengendali Lampu Rumah Berbasis SMS Gateway dan Arduino Menggunakan Smartphone Android

2020 ◽  
Vol 5 (2) ◽  
pp. 122-132
Author(s):  
Khairil Anam
Keyword(s):  
Control System ◽  
Mobile Phone ◽  
Smart Home ◽  
Electrical Equipment ◽  
Light Control ◽  
House Light ◽  
System A ◽  
The Media ◽  
Arduino Uno ◽  
Work Done

Control of electrical equipment using this mobile phone is a tool used by humans to make it easier to do work done over and over again, such as turning off / turning on the lights at a distance. This tool is made to make it easier for us to control the lights of the house, if left far away, the media used is a mobile phone by utilizing SMS facilities. This tool consists of one Arduino UNO for storing programming and as a system brain, SIM800L V2 for receiving and sending SMS to simcard numbers, Relay for turning off / on lights, 16x2 LCD to display predetermined words such as when sending SMS or when turning on the system, a piece of breadboard to connect some jumper cables to make it look neat, and the lights. This light control system will work according to a predetermined program, then this microcontroller will receive an SMS from the cellphone number used to control the system. In this study, the discussion is a house light control system with SMS gateway.

Build Smart Home Controls Using Wemos Microcontroller-Based Telegram App

CCIT Journal ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 1-12
Author(s):  
Freddy Artadima Silaban ◽  
Rendy Elmianto ◽  
Lukman Madriavin Silalahi
Keyword(s):  
Control System ◽  
Internet Of Things ◽  
Response Time ◽  
Open Source ◽  
Smart Home ◽  
Electronic Devices ◽  
Technological Developments ◽  
Arduino Uno ◽  
And Control

Current technological developments are very fast and progressing. One of the developments that occurs in the IoT (Internet Of Things) system. Many IOT (Internet Of Things) systems already have open source and can be suitable as needed, therefore by utilizing technological advancements, lamp controllers and house doors are made using Telegram applications. This control system can carry out home communications and control home electronic devices such as lights and house doors remotely using the Wemos and Arduino UNO microcontrollers. The Telegram application is used to send commands connected to the io.adafruit.com server. This system can provide notifications sent to the Telegram application when the house door is opened. The conclusion of the results obtained when the tool needed to communicate with the server is 12.94 seconds. For the voltage of 4 lights ± 220 V AC and for servo voltage ± 4.8 V DC. For the response time of the tool to the server ± 3 seconds, while the response time of the tool to Nextion LCD is ± 1 second

scholarly journals Design of Automatic Door Lock Control System Library Nurul Jadid University Based On Arduino Uno R3 and QR-Code

2020 ◽  
Vol 2 (2) ◽  
pp. 91
Author(s):  
Moch Badrus Sholeh ◽  
Amalia Herlina ◽  
Fuad Hasan
Keyword(s):  
Control System ◽  
Success Rate ◽  
Qr Code ◽  
Database Application ◽  
Digital Input ◽  
University Library ◽  
Testing Tools ◽  
Input And Output ◽  
Door Lock ◽  
Arduino Uno

The Nurul Jadid University Library (UNUJA) currently requires valid visitor data, because the number of visitors is an indicator of library performance in terms of disciplining staff / employees. For this reason, the UNUJA library requires an automatic library door lock control system using Arduino Uno and QR-Code. In designing tools, Arduino Uno and QR-Code are integrated with the library database application. Based on testing and analysis, it can be obtained that the success rate of testing tools in reading QR-code is 100 percent. The conclusion is that the assembly of the library door lock control system based on Arduino Uno and integrated QR-Code with the database has been able to read digital input and output.

Research on MES Domain Analysis Driven by Ontology

2010 ◽  
Vol 20-23 ◽  
pp. 1084-1090 ◽  
Author(s):  
Wen Long
Keyword(s):  
Control System ◽  
Software Development ◽  
Method Development ◽  
Domain Analysis ◽  
Manufacturing Execution System ◽  
Development Method ◽  
And Performance ◽  
And Control ◽  
Plan Management ◽  
Manufacturing Execution

Manufacturing Execution System (MES) links plan management and workshop control in an enterprise, which is an integrative management and control system of workshop production oriented to manufacturing process. To overcome the difficulties of traditional software development method, development of MES based on component is adopted to prompt development efficiency and performance of MES, which can be more reconstructing, reuse, expansion and integration, and MES domain analysis driven by ontology is investigated in detail. MES domain analysis driven by ontology is feasible and efficient through developing a pharmaceutics MES which applied in a pharmaceutics manufacturing factory.

Application of Configuration Technology in Traffic Light Control System Based on PLC

2012 ◽  
Vol 151 ◽  
pp. 510-513 ◽  
Author(s):  
Yu Peng Yao ◽  
Ying Shi ◽  
Ji You Fei
Keyword(s):  
Control System ◽  
New Technology ◽  
Computer Control ◽  
Good Condition ◽  
Control Technology ◽  
Light Control ◽  
Traffic Light ◽  
Software Simulation ◽  
Traffic Lights ◽  
Traffic Light Control

Configuration technology is a new technology for monitoring in the current society; it is the result of the development of computer control technology. To traffic light control system, it is to combine the use of configuration technology and procedures related to PLC, and through software simulation and traffic lights light changes, traffic light control system could achieve the monitoring problem, and if the system is in good condition, its application can save a lot of labor powers and materials.

IoT-based PID Controller for Light Control System

2021 ◽  
Author(s):  
Ing Ming Chew ◽  
Jobrun Nandong ◽  
Wan Ning Loh ◽  
Lenin Gopal
Keyword(s):  
Control System ◽  
Pid Controller ◽  
Light Control

PERANCANGAN PEMANTAUAN SUHU CLIMATIC CHAMBER BERBASIS ARDUINO DILENGKAPI HEATER DAN PELTIER

2021 ◽  
Vol 14 (1) ◽  
pp. 105-113
Author(s):  
Muhammad Ulin Nuha ABA ◽  
Bayu Wahyudi ◽  
Mohamad Sofie
Keyword(s):  
Success Rate ◽  
Temperature Increase ◽  
Temperature Monitoring ◽  
Temperature Decrease ◽  
Climatic Chamber ◽  
Data Logger ◽  
Arduino Uno

The climatic chamber is a calibration medium for the thermohygrometer. This simple climatic chamber was built using the Arduino uno, DHT22 sensor, heater, and peltier. The climatic chamber was designed and manufactured well and cheaply. Climatic chamber testing of the design results is carried out to determine the success rate of the tool. Tests are carried out using the Madgetech data logger tool through monitoring or monitoring of temperature within a certain period of time. The results of temperature monitoring at two observed values, namely temperatures of 250C to 300C and temperatures of 300C to 350C, showed good results with the corresponding rhythm of temperature increase and temperature decrease. It's just that the decrease in temperature still takes longer than the increase in temperature. This shows that the heater can be said to be working optimally and the peltier is not fully working. So it is necessary to do further studies related to the peltier for the climatic chamber both in terms of number and characteristics.

Sign in / Sign up

Export Citation Format

Share Document