scholarly journals Radiation and Mass Transfer Effects on Inclined MHD Oscillatory Flow for Prandtl-Eyring Fluid through a Porous Channel

2021 ◽  
Vol 26 (4) ◽  
Author(s):  
Wedyan Al-Kaabi ◽  
Dheia G. Salih Al-Khafajy

The goal of this work is to look at how heat transfer affects the oscillating flow of a hydrodynamically magnetizing Prandtl-Eyring fluid through a porous material under the impact of temperature and concentration under two different engineering conditions: Poiseuille flow and Couette flow. To get an unambiguous formula for fluid motion, we utilized the perturbation approach. Graphs are used to illustrate the findings..

2020 ◽  
pp. 3355-3365
Author(s):  
Dheia Gaze Salih Al –Khafajy ◽  
Lqaa Tareq Hadi

The aim of this research is to study the effect of heat transfer on the oscillating flow of the hydrodynamics magnetizing Eyring-Powell fluid through a porous medium under the influence of temperature and concentration for two types of engineering conditions "Poiseuille flow and Couette flow". We used the perturbation method to obtain a clear formula for fluid motion. The results obtained are illustrated by graphs.


2004 ◽  
Vol 3 (1) ◽  
pp. 45
Author(s):  
E. Nogueira ◽  
B. D. Dantas ◽  
R. M. Cotta

In a gas-liquid annular two-phase flow one of the main factors influencing the determination of heat transfer rates is the average thickness of the liquid film. A model to accurately represent the heat transfer in such situations has to be able of determining the average liquid film thickness to within a reasonable accuracy. A typical physical aspect in gas-liquid annular flows is the appearance of interface waves, which affect heat, mass and momentum transfers. Existing models implicitly consider the wave effects in the momentum transfer by an empirical correlation for the interfacial friction factor. However, this procedure does not point out the difference between interface waves and the natural turbulent effects of the system. In the present work, the wave and mass transfer effects in the theoretical estimation of average liquid film thickness are analyzed, in comparison to a model that does not explicitly include these effects, as applied to the prediction of heat transfer rates in a thermally developing flow situation.


2020 ◽  
Vol 142 (3) ◽  
Author(s):  
Saeid R. Angeneh ◽  
Murat K. Aktas

Abstract The influence of hydrodynamically developing nonzero mean acoustic streaming motion on transient convective heat transfer in an air-filled rectangular enclosure is studied numerically. The enclosure is two-dimensional with sinusoidal bottom wall spatial temperature distribution. The oscillatory flow under relatively large Womersley number regime conditions is actuated by the periodic vibrations of the enclosure side wall. The side walls of the enclosure are adiabatic, while the top wall is isothermal. The compressible form of the Navier–Stokes equations is considered to predict the oscillatory- and time-averaged mean flow fields. A control-volume method based explicit computational scheme is used to simulate the convective transport in the enclosure. The longitudinal and the transverse temperature gradients strongly affect the flow structure in the enclosure. The mean fluid motion alters the heat transfer behavior compared to the pure conduction.


Author(s):  
Jiajun Xu ◽  
Yuwen Zhang ◽  
H. B. Ma

Liquid-vapor oscillating flow and heat transfer in a vertically placed oscillating heat pipe (OHP) with a sintered particle wick structure inside are analyzed in this paper. The evaporation and condensation heat transfer coefficients are obtained by solving the microfilm evaporation and condensation on the sintered particles. The sensible heat transfer between the liquid slug and the channel wall are obtained by analytical solution or empirical correlations, depending on whether the liquid flow is laminar or turbulent. The effects of the maximum evaporation and condensation angles on the oscillatory flow, as well as sensible and latent heat transfer are analyzed.


2021 ◽  
Author(s):  
Conrad Zimmermann ◽  
Cagatay N. Dagli ◽  
Zlatan Arnautovic ◽  
Stephan Kabelac

Abstract The prediction of mixture condensation is still complex due to coupled heat and mass transfer and insufficient data of thermophysical mixture properties. This article analyzes the impact of various heat and mass transfer correlations on the non-equilibrium approach for mixture condensation in a vertical plain tube. Furthermore, the influence of thermophysical properties from different databases is investigated. The results are shown for ethanol-water, but allow conclusions to other fluid mixtures. They indicate that the liquid heat transfer coefficient in the non-equilibrium approach dominates the qualitative behavior of the condensation process, but the vapor mass transfer coefficient can only decrease or increase the quantitative level of the effective heat transfer with minor impact. More importantly, the logarithm in the vapor mass transfer term is central for the prediction of the condensation heat transfer. As this logarithm contains VLE data, it proves that there is a strong connection between VLE and overall prediction of mixture condensation. A demonstration of available data for thermophysical mixture properties of ethanol-water shows significant deviations, which affect the calculations as well. Besides, data from our own experiments are presented for mixture viscosity of ethanol-water. It is recommended to focus not only on improved heat and mass transfer correlations, but also on thermophysical properties and VLE data for a precise prediction of mixture condensation.


2006 ◽  
Vol 43 (12) ◽  
pp. 1317-1328 ◽  
Author(s):  
Serkan Özgen ◽  
Zafer Dursunkaya ◽  
Ali Aslan Ebrinç

Sign in / Sign up

Export Citation Format

Share Document