Sensitivity of the Non-Equilibrium Approach for Mixture Condensation to Heat and Mass Transfer Correlations and Thermophysical Properties

2021 ◽  
Author(s):  
Conrad Zimmermann ◽  
Cagatay N. Dagli ◽  
Zlatan Arnautovic ◽  
Stephan Kabelac

Abstract The prediction of mixture condensation is still complex due to coupled heat and mass transfer and insufficient data of thermophysical mixture properties. This article analyzes the impact of various heat and mass transfer correlations on the non-equilibrium approach for mixture condensation in a vertical plain tube. Furthermore, the influence of thermophysical properties from different databases is investigated. The results are shown for ethanol-water, but allow conclusions to other fluid mixtures. They indicate that the liquid heat transfer coefficient in the non-equilibrium approach dominates the qualitative behavior of the condensation process, but the vapor mass transfer coefficient can only decrease or increase the quantitative level of the effective heat transfer with minor impact. More importantly, the logarithm in the vapor mass transfer term is central for the prediction of the condensation heat transfer. As this logarithm contains VLE data, it proves that there is a strong connection between VLE and overall prediction of mixture condensation. A demonstration of available data for thermophysical mixture properties of ethanol-water shows significant deviations, which affect the calculations as well. Besides, data from our own experiments are presented for mixture viscosity of ethanol-water. It is recommended to focus not only on improved heat and mass transfer correlations, but also on thermophysical properties and VLE data for a precise prediction of mixture condensation.

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
David A. Aderibigbe

The paper reviews the present understanding of the analysis of the heat and mass transfer processes in single-slope solar stills. By using the results of published experiments, it is proposed that the heat and mass transfer phenomena from the basin water to the glass cover are coupled. This coupling makes it possible to derive the dependence of the heat transfer coefficient for condensation on the inclination of the glass cover of the still. The derived relation, i.e., Nucon = 0.738 (Grcon*Prcon*sin β/Ja*)¼ A−1 where A is the aspect ratio, has been demonstrated to be an important expression for predicting the heat transfer coefficient for condensation hcon necessary for a more realistic evaluation of the overall efficiency of single-slope solar still of a given cover angle β.


2012 ◽  
Vol 204-208 ◽  
pp. 4305-4314
Author(s):  
Jing Jing Zhang ◽  
Dan Dan Zhao ◽  
Lu Chun Wan ◽  
Bao Huai Zhang ◽  
Ya Ping Chen

A mathematical model of heat and mass transfer process in plate falling film absorber with wire-meshed fins was developed. The model could predict temperature and concentration distribution as well as the solution side heat transfer coefficient and the absorption rate. The results verify that heat and mass transfer performance of the plate falling film absorber with wire-meshed fins is better than the past absorber. Compared with the plate falling film absorber without fins, heat transfer coefficient of the absorber in this article increases 1.06 times and the absorption rate increases 2.32 times.


2020 ◽  
Vol 194 ◽  
pp. 01027
Author(s):  
Shibo Zhao ◽  
Yonghui Zhang ◽  
Yunqi Nie ◽  
Pengyu Qu ◽  
Wenqiang Sun

The traditional refrigeration method of internet data center (IDC) is mostly air refrigeration, which has undesired cooling effect and high power consumption. This study addresses this problem and proposes an evaporative air cooler (EAC) suitable for IDC. Given the high specific heat capacity of water, the evaporative condensing coil and spray device are added to the evaporative cooler to enhance the heat transfer effect. Heat and mass transfer mathematical models are established to analyze the heat transfer performance. The mathematical model is used to simulate the profile of the heat and mass transfer coefficient of the EAC with the amount of spray water and air flow. The results show that when the air flow changes from 10 to 20 kg/s, the air equivalent heat transfer coefficient increases by about 41%. When the air flow rate is 20 kg/s and the spray water volume is 0.00124 kg/(mꞏs), the total heat transfer coefficient is increased by about 308% compared with the case without spray water.


2019 ◽  
Vol 23 (1) ◽  
pp. 331-345 ◽  
Author(s):  
Raheel Ahmed ◽  
Nasir Ali ◽  
Khurram Javid

In the present study heat and mass transfer phenomena in flow of non-Newtonian Sisko fluid induced by peristaltic activity through a curved channel have been investigated numerically using an implicit finite difference scheme. The governing equations are formulated in terms of curvilinear co-ordinates with appropriate boundary conditions. Numerically solution is carried out under long wavelength and low Reynolds number assumptions. The velocity field, pressure rise per wavelength, stream function, temperature, and concentration fields have been analyzed for the effects of curvature parameter, viscosity parameter, and power law index. Additionally, the computation for heat transfer coefficient and Sherwood number carried out for selected thermophysical parameters. The main results that are extracted out this study is that for strong shear-thinning biofluids (power-law rheological index, n < 1) the flow exhibits the boundary-layer character near the boundary walls. Both temperature and mass concentration are found to increase with increasing the generalized ratio of infinite shear rate viscosity to the consistency index. The amplitude of heat transfer coefficient and Sherwood number is also an increasing function of generalized ratio of infinite shear rate viscosity to the consistency index.


Author(s):  
Gligor H. Kanevce ◽  
Ljubica P. Kanevce ◽  
George S. Dulikravich ◽  
Marcelo J. Colac¸o

The inverse problem of using temperature measurements to estimate the moisture content and temperature-dependent moisture diffusivity together with the heat and mass transfer coefficients is analyzed in this paper. In the convective drying practice, usually the mass transfer Biot number is very high and the heat transfer Biot number is very small. This leads to a very small temperature sensitivity coefficient with respect to the mass transfer coefficient when compared to the temperature sensitivity coefficient with respect to the heat transfer coefficient. Under these conditions the relative error of the estimated mass transfer coefficient is high. To overcome this problem, in this paper the mass transfer coefficient is related to the heat transfer coefficient through the analogy between the heat and mass transfer processes in the boundary layer. The resulting parameter estimation problem is then solved by using a hybrid constrained optimization algorithm OPTRAN.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Mapula Lucey Moropeng ◽  
Andrei Kolesnikov ◽  
Mykhaylo Lototskyy ◽  
Avhafunani Mavhungu

AbstractThis paper presents the investigation of a two dimensional coupled model of heat and mass transfer in a mixture of AB2 – AB5 metal hydride (MH) systems of a cylindrical configuration during hydrogen sorption using COMSOL 5.3a commercial software. The parametric study on the sorption process has been studied with variation of heat transfer coefficient (HTC), and activation energy (AE) to understand the effects they have on the reaction kinetics of the sorption process. The simulation results demonstrate the importance of mutual dependence between the temperature propagation in the body of metal hydride, the absorbed concentration of the hydrogen gas, and the gas pressure for the absorption of hydrogen gas in metal hydrides. The decrease in the activation energy is found to have significant effect on the dynamic performances of hydrogen absorption in the MH reactors with an increased amount of hydrogen conversion, whilst the variation of heat transfer coefficient displayed insignificant change in hydrogen conversion. The simulated results show good agreement with the experimental results obtained from HYSA Systems and were implemented for use in the STILL RX60-30L electric forklift fuel cell applications designed by HYSA Systems in the University of the Western Cape.


2020 ◽  
Vol 34 (24) ◽  
pp. 2050255
Author(s):  
Aamir hamid ◽  
Abdul Hafeez ◽  
Masood Khan

In this paper, the combined heat and mass transfer of mixed convection, non-similar Sisko fluid flow in the presence of a magnetic field is studied. The combined effects of thermal radiation and heat generation/absorption are examined for Sisko fluid flow via local non-similar method. For the radiative heat transfer, Rosseland approximation model is used. The governing partial differential equations of the present problem are transformed into a system of nonlinear ordinary differential equations by employing the Sparrow–Quack–Boerner local non-similarity method (LNM). The obtained equations are then numerically investigated by utilizing the bvp4c function in MATLAB. The impact of different supervising parameters on the velocity, temperature, skin friction and rate of heat transfer is performed graphically. It is observed that the velocity is more for a higher rate of the buoyancy force parameter while it is less for opposing buoyancy fluid. The thermal boundary layer thickness for the shear thickening fluids is smaller than the shear thinning fluids.


2021 ◽  
Vol 45 (03) ◽  
Author(s):  
NGUYEN HIEU NGHIA ◽  
LE CHI HIEP ◽  
DUONG CONG TRUYEN

The absorption process has been confirmed as the most important process in absorption refrigeration machines in terms of improving their total efficiency. One of the key research directions is the selection of absorber structure which is expected to be fabricated in Vietnam without demand of new infrastructure investment. In this study, a local model of the coupled heat and mass transfer during absorption process of NH3 vapor by a NH3-H2O diluted solution flowing over horizontal round tubes of an absorber was made. The heat transfer coefficient obtained from the coupled heat and mass transfer mathematic model. This heat transfer coefficient is used to calculate the variation of the simulated value of heat load. The correlations which give the heat transfer coefficient and mass transfer coefficient in the absorption process in range of solution concentration ω = 28% ÷ 31%, solution mass flow rate per unit tube length Γ = 0.001 ÷ 0.03 kgm-1s-1, coolant temperature twater = 28 oC ÷ 38 oC are set as two functions. The practical decrease of wetted ratio analyses were taken into account when the solution flow from the top to the bottom of the parallel tube bundle. The deviation of theoretical heat load and experimental heat load is about 12.3%. Based on these simulations, the theoretical studies were done for absorption refrigeration system in order to narrow the working area where the experiments later focused on. The results of this study will be the basis for subsequent application research of falling film absorbers.


Sign in / Sign up

Export Citation Format

Share Document