scholarly journals Pemulung Cerdas Muara Fajar

2021 ◽  
Vol 5 (3) ◽  
pp. 390
Author(s):  
Nurul Safiqah Jonit ◽  
Mardona Mardona ◽  
Gustia Herliana ◽  
Sari Wulan ◽  
Nadia Fathurrahmi Lawita

PEDAS AJAR merupakan singkatan dari Pemulung Cerdas Muara Fajar yang  menjadi mitra pada program yang dilaksanakan. Kegiatan ini menjadi bentuk perhatian pemuda selaku mahasiswa  terhadap perekonomian masyarakat kecil yang notabennya adalah pemulung, dalam agenda yang direncanakan berlangsung selama tiga bulan, tim PEDAS AJAR  bermaksud untuk memberikan pelatihan atau mentoring kepada kelompok pemulung yang  berdasarkan yang dikategorikan sebagai masyarakat dengan pendapatan minim, dengan demikian TIM PEDAS AJAR memberikan pendampingan dan pelatihan dengan bantuan mentor untuk mengelola dan mengolah sampah plastik menjadi barang yang bernilai jual tinggi, sehingga pola perekonomian masyarakat berubah yang awalnya hanya mengumpulkan kemudian dijual, namun  menjadi mengumpulkan, menggolah dan menjual sehingga hasil produk olahan dapat memiliki nilai jual yang lebih tinggi. Pada kegiatan nantinya akan ada peresmian rumah produksi sebagai luaran dari kegiatan yang dapat dimanfaatkan sebagai tempat pengelolan dari daur ulang sampah plastik oleh mitra. Dalam pelaksanaannya target yang ditetapakan tidak hanya pemulung dalam ketegori remaja hingga dewasa namun juga mentargetkan anak-anak pemulung untuk diberikan motivasi agar tetap bersekolah dan melanjutkan pendidikan hingga menggapai impian yang diinginkan, dimana sesi motivasi ini juga diselingi dengan games serta sharing pengalaman yang didampingi oleh tim, program ini disebut Program Kakak Asuh. Selain program Mentoring Pemulung dan program Kakak Asuh, program lain yang dilaksanakan  adalah program sosialisasi dan pemeriksaan kesehatan hal ini dianggap penting untuk memberikan edukasi kepada masyarakat yang kesehariannya berbaur dengan sampah yang ada di TPA ( Tempat Pembuangan Akhir ) agar tetap memelihara kebersihan lingkungan sekitar untuk terciptanya masyarakat sehat yang produktif. Program- program yang diusung dalam PEDAS AJAR ini juga sebagai bentuk dari pengimplementasian mewujudkan SDGs / TPB atau Tujuan Pembangunan Berkelanjutan.Kata Kunci: Mentoring, Kakak Asuh, Sosialisasi dan Periksaan kesehatan, meningkatkan pendapatan , mengapai impian dan lingkungan sehat, SDGs/TPB.Intelligent Scavengers of Estuary of Dawn ABSTRACTPEDAS AJAR stands for Smart Pemulung Muara Fajar who is a partner in the program being implemented. This activity is a form of attention from youth as students to the economy of small communities who in fact are scavengers, in an agenda that is planned to last for three months, the PEDAS AJAR team intends to provide training or mentoring to scavenger groups based on those categorized as people with minimal income, thus The PEDAS AJAR TEAM provides assistance and training with the help of mentors to manage and process plastic waste into items of high selling value, so that the community's economic pattern changes which initially only collects and then sells, but becomes collecting, processing and selling so that the processed products can have a selling value. higher. In the activity, there will be an inauguration of a production house as an output of the activity that can be used as a place for managing plastic waste recycling by partners. In its implementation, the targets set are not only scavengers in the category of teenagers to adults but also targeting scavengers' children to be given motivation to stay in school and continue their education to achieve the desired dreams, where this motivational session is also interspersed with games and sharing experiences accompanied by the team. , this program is called Foster Sister Program. In addition to the Scavenger Mentoring program and the Foster Brothers program, other programs implemented are the socialization program and health checks. These are considered important to provide education to the community who mix with the waste in the TPA (Final Disposal Site) in order to maintain the cleanliness of the surrounding environment for productive healthy society. The programs carried out in PEDAS AJAR are also a form of implementing the SDGs/TPB or Sustainable Development Goals.Keywords: Mentoring, Foster Brothers, Socialization and Health Checkups, increasing income, achieving dreams and a healthy environment, SDGs/TPB.

2020 ◽  
Vol 161 ◽  
pp. 104907 ◽  
Author(s):  
Ruben Demets ◽  
Martijn Roosen ◽  
Lore Vandermeersch ◽  
Kim Ragaert ◽  
Christophe Walgraeve ◽  
...  

2014 ◽  
Vol 664 ◽  
pp. 80-86
Author(s):  
Abdalla I. Alajail ◽  
Ahmed I. Seedahmed ◽  
Babiker K. Abdalla ◽  
Omer A. Shaneb

Pyrolysis of waste plastics is one of the routes used for waste minimization, which has been gaining interest in recent years as a feedstock method.In this work, the two universal problems: plastics waste and fuel shortage have been addressed simultaneously. The process of converting PP and PE plastics waste in Libya into fuel and chemicals was overviewed. Data concerning Plastic Industry in Libya was collected to which some projection of the future production rate and waste rate has been estimated.Keywords: Plastic waste; recycling of polymers; waste management.


2020 ◽  
Vol 3 (2) ◽  
pp. 90
Author(s):  
Hendy Suryana

Abstract-The development of a plastic waste recycling model in the reverse logistics network system is based on the current plastic waste management business activities in Indonesia (in this case the Bekasi and surrounding areas), which is strengthened by some literature on the same business activities in several other countries, such as India. The reverse logistics system in Indonesia is currently one of the best alternatives that can be considered in reducing the limitations of raw material resources. In addition, reverse logistics is proven to provide economic value for business people, then environmental issues become one of the strongest motivations in conducting reverse logistics business. This study aims to develop a model of plastic waste recycling in Indonesia, specifically plastic waste of the compound type LDPE (Low Density Polyethylene) and HDPE (High Density Polyethylene) in the reverse logistics network system and to determine the distribution and transportation network system related to business management activities the plastic garbage. The development of this model can be developed based on empirical data in observing the behavior and characteristics of model variables. The results of the model can produce the total cost of a reverse logistics system in managing plastic waste in Bekasi and its surroundings at Rp. 196,220,250Abstrak-Pengembangan model daur ulang sampah plastik dalam sistem jaringan reverse logistics didasarkan pada aktivitas bisnis pengelolaan sampah plastik di Indonesia (dalam hal ini wilayah Bekasi dan sekitarnya) saat ini, yang diperkuat dengan beberapa literatur mengenai aktivitas bisnis yang sama di beberapa negara lain, seperti India. Sistem reverse logistics di Indonesia, saat ini menjadi salah satu alternatif terbaik yang dapat dipertimbangkan dalam mengurangi keterbatasan sumber daya bahan baku. Selain itu, reverse logistics terbukti dapat memberikan nilai ekonomis bagi para pelaku bisnis, lalu isu lingkungan menjadi salah satu motivasi terkuat dalam melakukan bisnis reverse logistics. Penelitian ini bertujuan untuk mengembangkan model daur ulang sampah plastik di Indonesia, khususnya sampah plastik berjenis senyawa LDPE (Low Density Polyethylene) dan HDPE (High Density Polyethylene) dalam sistem jaringan reverse logistics serta untuk menentukan system jaringan distribusi dan transportasi yang terkait dengan aktivitas bisnis pengelolaan sampah plastik tersebut. Pengembangan model ini dapat dikembangkan berdasarkan data empiris dalam mengamati perilaku dan karakteristik variabel-variabel model. Hasil model dapat dihasilkan total biaya sistem reverse logistics dalam pengelolaan sampah plastik di Bekasi dan sekitarnya sebesar Rp. 196,220,250,-.


Author(s):  
Suwati Ummat ◽  
Marianah Marianah ◽  
Muanah Muanah ◽  
Ahmad Akromul Huda ◽  
Desy Ambar Sari ◽  
...  

Household waste contributes to the volume of waste. In general, household waste is easily biodegradable and difficult to decompose. Household products that are hard to decompose are generally plastic and plastic bottles predominantly. The difficulty of decomposing household plastic waste requires serious handling, so it is necessary to provide assistance for processing plastic waste into useful creations. One of them becomes ecobric. There are two methods of this activity, namely direct counseling and training. The results obtained after the community service activities were completed was that they were able to improve community skills in processing plastic waste into ecobrics. Furthermore, ecobrics are created into potted plants and other forms of creation. In addition, after this activity is carried out, it can reduce the movement of plastic waste to the final disposal site (TPA), so that the community hopes that this activity will continue to be transmitted to other places to create a clean and free environment from plastic waste.


2021 ◽  
Vol 25 (10) ◽  
pp. 1-11
Author(s):  
Pavinee Pongpunpurt ◽  
Natsuda Navamajiti ◽  
Kerkritt Sriroongvikrai ◽  
Muentawan Onnom ◽  
Pat Pinitjitsamut ◽  
...  

2021 ◽  
Vol 13 (16) ◽  
pp. 9142
Author(s):  
Swikriti Khadke ◽  
Pragya Gupta ◽  
Shanmukh Rachakunta ◽  
Chandreswar Mahata ◽  
Suma Dawn ◽  
...  

Global plastic waste is increasing rapidly. In general, densely populated regions generate tons of plastic waste daily, which is sometimes disposed of on land or diverged to sea. Most of the plastics created in the form of waste have complex degradation behavior and are non-biodegradable by nature. These remain intact in the environment for a long time span and potentially originate complications within terrestrial and marine life ecosystems. The strategic management of plastic waste and recycling can preserve environmental species and associated costs. The key contribution in this work focuses on ongoing efforts to utilize plastic waste by introducing blockchain during plastic waste recycling. It is proposed that the efficiency of plastic recycling can be improved enormously by using the blockchain phenomenon. Automation for the segregation and collection of plastic waste can effectively establish a globally recognizable tool using blockchain-based applications. Collection and sorting of plastic recycling are feasible by keeping track of plastic with unique codes or digital badges throughout the supply chain. This approach can support a collaborative digital consortium for efficient plastic waste management, which can bring together multiple stakeholders, plastic manufacturers, government entities, retailers, suppliers, waste collectors, and recyclers.


Sign in / Sign up

Export Citation Format

Share Document