SIMULATION OF MIMO CHANNEL OF FIFTH GENERATION NETWORKS IN MATLAB SIMULINK SYSTEM

Author(s):  
Viktor Magnitskiy

The article describes the Simulink model of the hardware of the MIMO wireless communication system. The model includes a CRC generator, QPSK, OFDM modulator, and antenna arrays at the transmitter and receiver. The presented model makes it possible to simulate the expensive transmit-receive equipment of the MIMO system, and also illustrates the capabilities of Simulink.

In the ground of digital word, wireless communication system has widespread functions. The demand for wireless communication is growing day by day. All users want better quality service in scope of wireless communication. Due to high bit error rate (BER), low signal to noise ratio (SNR), limited bandwidth and high standard deviation (SD) of phase error conventional wireless communiqué systems like SISO, SIMO and MISO flops to gather the mounting demand of users. Therefore a new technique MIMO system is realized whose performance is evaluated by parameters BER, SNR and SD of Phase Error. Latest approach for increasing the performance of virtual MIMO communications within peers by ill-treatment situation with giant antenna arrays is developed. MIMO provides low BER and low SD of Phase Error with increased SNR, which forms a good feature for wireless communication system. In this paper, performance of MIMO is assessed under Nakagami-m and Rayleigh fading channels. For a wireless system BER and SD of phase error should be minimum, which is achieved in MIMO system.


2019 ◽  
Vol 27 (2) ◽  
pp. 105-110
Author(s):  
A. B. Gnilenko ◽  
S. V. Plaksin

Millimeter waves are now considered as an important part of 5G spectrum. Higher frequencies provide larger bandwidth giving the ability to support very high data rate, ultra high capacity and very low latency. The utilization of millimeter wave frequency bands for 5G mobile applications requires effective solutions in the design of antennas and antenna arrays which are the key parts of modern communication systems. In this paper a 4x4 microstrip patch antenna array sub-module is presented to be a part of 5G wireless communication system. The antenna array is designed and optimized to operate at a frequency of 85 GHz which corresponds to the middle of the second atmospheric transparency window. The antenna array is simulated using the time domain solver of the CST Microwave Studio software package. Simulation results are demonstrated and discussed for an optimized array. The designed patch antenna array provides good directivity characteristics with a main lobe magnitude of 16 dBi, angular width of 28 degree and can be applied as a part of a wireless communication system operating at a high frequency band of 5G frequency range.


2005 ◽  
Vol 1 (1) ◽  
pp. 33
Author(s):  
Xiu Chundi ◽  
Wang Jing

The information theoretic capacity of a single user distributed wireless communication system (DWCS) is investigated and compared to that of traditional cellular MIMO system. Simulation results show that, DWCS always outperforms traditional MIMO system, and the capacity gain increase with the incremental number of the fixed antennas. Moreover, the use of distributed antennas in DWCS can average the shadowing effect and solve the near-far problem efficiently.


Author(s):  
Sarala Patchala ◽  
M. Sailaja

: The next generation 5g communications are used with baseband precoders and beam forming. The technology is needed to update the all the available characteristics in the present wireless communication system. In the mmWave MIMO system the number of antenna are increased to improve the spectral efficiency of the system.


2014 ◽  
Vol 912-914 ◽  
pp. 952-955
Author(s):  
Huan Wang ◽  
Jian Zhou

MIMO (Multi-input Multi-output) is an abstract mathematical model used to describe the multi-antenna wireless communication system. the transmitter can use a plurality of separate antennas transmit signals simultaneously. This paper first analyzes MIMO physical model, and then the MIMO channel characteristics and capacity for analysis, analysis of MIMO antenna characteristics and finally focus on the correlation coefficient


The 5G communications are used with baseband Precoders and Beamforming. The Technology is needed to update, all available characteristics in the present Wireless Communication System (WCS). The Hybrid Beamforming systems are across in the RF and Digital domain. In the mmWave MIMO system, the numbers of antennas has increased to improve the Spectral Efficiency of the system. The proposed algorithms observe that system performance for different SNR range.


2017 ◽  
Vol 140 ◽  
pp. 01009 ◽  
Author(s):  
N. N. Daud ◽  
M. N. Osman ◽  
M.R. Kamarudin ◽  
A.R. Kram ◽  
M.M. Azizan

Sign in / Sign up

Export Citation Format

Share Document