scholarly journals Effect of dates of sowing and varieties on yield and quality of cluster bean (Cyamopsistetra gonoloba L.)

2017 ◽  
Vol 9 (2) ◽  
pp. 1081-1084
Author(s):  
Sunil Kumar ◽  
M. Martin Luther ◽  
Vikram Kumar ◽  
K. Hemalatha
Keyword(s):  
Growth Parameters ◽  
Block Design ◽  
Quality Parameters ◽  
Yield Attributes ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Study Results ◽  
Gum Content ◽  
Traditional Area

A field experiment was conducted at Agricultural College Farm, Bapatla (Andhra Pradesh), study the effect of different sowing dates on the yield and quality of different varieties of clusterbean. The experiment was laid out in factorial randomized block design replicated thrice, six dates of sowing from 15th September to 1st December at fifteen days interval and two clusterbean varieties viz. RGC-936 and RGC-1003. Results revealed that growth parameters, yield attributes, yield (1568 kg ha-1) and quality parameters viz. gum content (31.6 %), protein content (30.1 %) and viscosity (3783 cP) were highest with RGC-1003 sown at 15thNovember, which was at par with 1st December sowing with same variety. The study results showed that the clusterbean crop can be grown successfully in non-traditional area as a rabi crop.

Effect of Integrated Nutrient Management on Yield and Quality of Garlic cv. Yamuna Safed-3

2020 ◽  
Vol 7 (04) ◽  
Author(s):  
A B Priyanshu ◽  
M K Singh ◽  
Mukesh Kumar ◽  
Vipin Kumar ◽  
Sunil Malik ◽  
...  
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Quality Parameters ◽  
Organic Fertilizers ◽  
Research Centre ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
The Impact ◽  
Horticultural Research

An experiment was conducted at Horticultural Research Centre, SVP University of Agriculture and Technology, Meerut (UP) during Rabi season of 2018-19 to assess the impact of different INM doses on yield and quality parameters of garlic. A total of ten treatments consisting of combinations of inorganic fertilizers, organic fertilizers and bio-fertilizers like T1- (Control), T2RDF (100:50:50 kg NPK ha-1), T3-RDF + 20 kg sulphur + FYM 20 ton ha-1, T4- RDF + 20 kg sulphur + VC 4 ton ha-1, T5- 75% RDF + 40 kg sulphur + 5 ton FYM ha-1+ PSB 5 kg ha-1, T6-75% RDF + 40 kg sulphur + 2 ton VC + Azotobacter 5 kg ha-1, T7- 75% RDF + 40 kg sulphur + FYM 3 ton + VC 1 ton+ PSB 5 kg + Azotobacter 5kg ha-1, T8- 50% RDF + 40 kg sulphur + FYM 5 ton + VC2 ton + PSB 5 kg ha-1, T9- 50% RDF + 40 kg sulphur + FYM5 ton + VC 2 ton+ Azotobacter 5 kg ha-1and T10- 50% RDF + 40 kg sulphur + FYM 5 ton + VC2 ton + PSB 5 kg + Azotobacter 5 kg ha-1 were used in Randomized Block Design and replicated thrice. Out of these an application of T7 (75% RDF + 40 kg sulphur + FYM3 ton + VC 1 ton ha-1 + PSB 5 kg + Azotobacter 5 kg ha-1) was found to be significantly superior in term of yield and attributing parameters of garlic.

scholarly journals Influence of off-season land management on maximizing yield and quality of Curcuma longa L. cultivars

1970 ◽  
pp. 33-36
Author(s):  
A. ANBURANI
Keyword(s):  
Land Management ◽  
Management Practices ◽  
Curcuma Longa ◽  
Block Design ◽  
Quality Parameters ◽  
Polyethylene Film ◽  
Superior Performance ◽  
Yield And Quality ◽  
Randomized Block Design

The present investigation was carried out to study the effect of off season soil management practices on yield and quality of turmeric (Curcuma longa L.) cultivars. The experiment was laid out in a Factorial Randomized Block Design with ten treatments in three replications consisted of five off-season land management treatments viz., fallow (S1), summer ploughing 2 times (S2), summer ploughing 1 time (S3), solarization with transparent polyethylene film of 0.05 mm thick for 40 days (S4) and black polyethylene film for 40 days (S5). It was tested with two popular cultivars viz., Curcuma longa -1 CL-1 (V1) and Curcuma longa-2 CL-2 (V2), collected from Erode and Chidambaram. Various yield components were recorded at the time of harvest and were analysed. The yield attributing characters viz., number, length, girth and weight of mother, primary and secondary rhizomes were recorded. The treatment where solarization with transparent polyethylene film of 0.05 mm thick was tested recorded the highest yield and yield attributing characters when compared to other treatments. The same treatment also exhibited the highest fresh rhizome yield per plant, curing percentage and cured rhizome yield. The quality parameters like curcumin, oleoresin and essential oil content were also showed superior performance in the treatment where solarization with transparent polyethylene film of 0.05 mm thick was applied.

scholarly journals Influence of Ascophyllum nodosum extract, homobrassinolide and triacontanol on fruit retention, yield and quality of mango

2021 ◽  
Vol 42 (4) ◽  
pp. 1085-1091
Author(s):  
A. Dash ◽  
◽  
D. Samant ◽  
D.K. Dash ◽  
S.N. Dash ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Foliar Application ◽  
Block Design ◽  
Ascophyllum Nodosum ◽  
Quality Parameters ◽  
Fruit Weight ◽  
Fruit Growth ◽  
Yield And Quality ◽  
Randomized Block Design

Aim: To evaluate the efficacy of foliar application of Ascophyllum nodosum extract, homobrassinolide, and triacontanol for improving fruit retention, yield, and quality in mango. Methodology: The experiment was laid out in a randomized block design with 10 treatments, comprising Ascophyllum nodosum extract (1000, 3000, and 5000 ppm), homobrassinolide (0.1, 0.3, and 0.5 ppm), triacontanol (1, 3, and 5 ppm), and water as control. Treatments were foliar sprayed at panicle initiation, pea, and marble stages of fruit growth. Observations were recorded on flowering, fruiting, yield, and fruit quality parameters. Results: All the treatments of Ascophyllum nodosum extract and triacontanol exhibited significant improvement in fruit retention, fruit weight, yield, and fruit quality parameters over control. However, 3000 and 5000 ppm Ascophyllum nodosum extract treatments outperformed all the treatments of triacontanol. Plants sprayed with 5000 ppm Ascophyllum nodosum extract recorded the maximum value for fruit retention (48.15, 36.74, 29.48, and 25.76% at 3, 6, 9, and 12 weeks after pea stage, respectively), number of fruits (133.25 per tree), fruit weight (188.84 g per fruit), and yield (25.16 kg per tree), whereas the lowest values were recorded under control. With respect to fruit quality, 3000 ppm ANE produced the fruits with the highest TSS (19.62 °B), whereas the highest TSS/acid ratio was recorded with 5000 ppm ANE (62.29) treatment. Interpretation: In mango, foliar application of Ascophyllum nodosum extract (3000-5000 ppm) thrice at panicle initiation, pea, and marble stages of fruit growth is effective for reducing fruit drop and enhancing quantum and quality of produce.

scholarly journals Efficacy of Different Types of Composts on Growth, Yield and Quality Parameters of Okra (Abelmoschus esculentus L.) cv. Kashi Pragati

2021 ◽  
Vol 9 (4) ◽  
pp. 163-168
Author(s):  
Vaibhav Sharma ◽  
Keyword(s):  
Block Design ◽  
Growth Yield ◽  
Quality Parameters ◽  
Abelmoschus Esculentus ◽  
Biogas Slurry ◽  
Rabi Season ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Different Types

The experiment entitled “Efficacy of different types of Composts on growth, yield and quality parameters of Okra (Abelmoschus esculentus L.) cv. Kashi Pragati” was conducted during Rabi season of the year 2020-2021 on experimental farm of Department of Horticulture, AKS University, Satna (M.P.). The experiment was laid out in a randomized block design with three replicated 12 treatments viz., T0: Without compost (Control), T1: 100% Vermicompost + 100% Biogas slurry compost, T2: 100% Vermicompost + 100% Mushroom Spent compost, T3: 100% Biogas slurry compost + 100% Mushroom Spent compost, T4: 100% Vermicompost + 100% Biogas slurry compost +100% Mushroom Spent compost, T5: 100% Vermicompost + 50% Biogas slurry compost, T6: 100% Vermicompost + 50% Mushroom Spent compost, T7: 100% Biogas slurry compost + 50% Vermicompost, T8: 100% Biogas slurry compost + 50% Mushroom Spent compost, T9: 100% Mushroom Spent compost + 50% Vermicompost, T10: 100% Mushroom Spent compost + 50% Biogas slurry compost, T11: 50% Vermicompost + 50% Biogas slurry compost +50% Mushroom Spent compost. The results reveal that increase in Composts level had significant response on vegetative growth yield and quality of Okra. The treatment T4-100%Vermicompost +100% Biogas slurry compost +100% Mushroom Spent compost was found to be the best treatment among the different treatments with growth, yield and quality for Okra under satna condition.

scholarly journals Influence of Organic Manure and Bioagents on Growth, Yield and Quality of Okra under Assam Condition

2020 ◽  
pp. 79-88
Author(s):  
Manisha Kachari ◽  
Sailen Gogoi
Keyword(s):  
Field Trial ◽  
Block Design ◽  
Organic Amendments ◽  
Growth Yield ◽  
Quality Parameters ◽  
Organic Manure ◽  
Yield And Quality ◽  
Yield Parameters ◽  
Randomized Block Design

A field trial was conducted to assess the effect of organic inputs and bioagents on growth, yield, and quality of okra. Thirteen treatments in the experiment were laid out in Randomized Block Design with three replications. The results revealed that the yield parameters were best in conjoint application of organic and inorganic fertilizer whereas the physical and quality parameters showed a maximum in integrated application of organic amendments and bioagents. On the basis of the findings it may be concluded that FYM @ 20 t/ha + VAM + Pseudomonas + Trichoderma + Azotobacter resulted the highest B: C ratio (2.66) and can be recommended as substitute for the inorganic combination of FYM @ 10 t/ha + 50:50:50 kg NPK/ha for higher quality yield with remunerative return.

scholarly journals Optimization of Copper Sulphate Levels to Enhance Yield and Quality of Aggregatum Onion (Allium cepa var aggregatum L)

2021 ◽  
Vol 108 ◽  
pp. 1-5
Author(s):  
Jegadeeswari D ◽  
◽  
Chitdeshwari T ◽  
Shukla A.K ◽  
◽  
...  
Keyword(s):  
Tamil Nadu ◽  
Field Experiments ◽  
Block Design ◽  
Quality Parameters ◽  
Cu Content ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Coimbatore District ◽  
Bulb Yield

Field experiments were conducted during rabi season of 2018 and summer season of 2019 at farmer’s field, western zone of Tamil Nadu at Pattiyarkovilpathy, Theethipalayam and Narasipuram villages of Thondamuthur block of Coimbatore district. Totally five treatments comprising of varied CuSO 4 levels (0, 2.5, 5.0, 7.5 & 10.0 kg ha-1) were replicated four times in a randomized block design under irrigated conditions. The results showed that, fresh mean bulb yield of onion in four locations ranged from 12.4 to 15.6 t ha-1. The highest mean bulb yield of 15.6 t ha-1 was registered with recommended NPK+5 kg CuSO4 ha-1 and the lowest mean bulb yield of 12.4 t ha-1 was recorded in NPK control with no CuSO 4 addition. Dry Matter Production ranged from 1065 to 1199 kg ha-1. The highest DMP of 1199 kg ha-1 was recorded in the treatment that was applied with NPK+5 kg CuSO4 ha-1 and the lowest DMP (1065 kg ha-1) was noticed with NPK control. Concerning copper content in bulb and foliage, it ranged from 6.09 to 12.3 and 8.46 to 13.7 mg kg-1 with the location mean of 6.16 to 12.0 mg kg-1 and 7.61 to 11.1 mg kg-1, respectively. Copper uptake in bulb and sheath varied from 7.05 to 18.3 and 6.26 to 11.0 g ha-1 (mean of 8.55 to 12.3 and 6.52 to 10.4 g ha-1), respectively with a total uptake of 14.1 to 27.6 g ha-1. In both bulb and foliage, Cu content and uptake, increased with increasing doses of CuSO 4 and the highest Cu content and uptake was registered with the application of CuSO4 @ 10.0 kg ha-1. Regarding the availability of copper in soil, it ranged from 0.73 to 2.42 mg kg-1 and increasing levels of CuSO4 application increased the DTPA Cu status in soil and application of 10.0 kg CuSO 4 ha-1 recorded the highest copper availability in soil. Quality parameters viz., TSS, titrable acidity and ascorbic acid varied from 10.25 to 14.08 oBrix, 0.28 to 0.61% and 12.9 to 20.1 (100 g-1FW), respectively. Field experiments conducted to optimize the rates of copper sulfate application to improve the yield and quality of aggregatum onion in four locations at Coimbatore district, showed that, soil application of 5 kg CuSO4 along with recommended NPK @ 60:30:30 kg ha-1 was found optimal for obtaining higher bulb yield (15.6 t ha-1) and better quality in aggregatum onion with a BC ratio of 4.63.

Post harvest seed quality of greengram as influenced by pre-harvest spray of insecticides

2016 ◽  
Vol 50 (2) ◽  
Author(s):  
B. N. Raghu ◽  
Rai Prashant Kumar ◽  
Basave Gowda ◽  
N. Manjunatha ◽  
Rajeshwari S. Alur
Keyword(s):  
Seed Yield ◽  
Methyl Parathion ◽  
Seed Quality ◽  
Block Design ◽  
Quality Parameters ◽  
Yield And Quality ◽  
Yield Parameters ◽  
Randomized Block Design ◽  
Two Factors

The experiment was conducted to study the effect of insecticides and stages of insecticidal sprays on seed yield and yield components in greengram. The investigation was carried out in Department of Genetics and Plant Breeding, during <italic>Kharif</italic> 2012. The experiment was laid in factorial randomized block design (FRBD) consisted of 15 treatment combinations involving two factors with three replications. Among the five test insecticides, spraying of malathion @ 2 ml/l recorded significantly more number of pods/plant (20.75), pod weight (20.45g), seed yield/plant (3.17 g), seed yield/hectare (949 kg) and less percentage of infested pods (5.35%) as well as infested seeds/plant (2.66%). It was followed by nimbicidine and methyl parathion. Whereas reciprocal values for these seed yield parameters were noticed in the unsprayed control plants (16.13, 16.53g, 1.84g, 725 kg, 14.13% and 7.89%, respectively). Similar results were recorded in spraying of insecticides at 20 and 10 Days before harvest compare to 20 or 10 Days before harvest. Interaction effect between insecticides and stages of insecticidal spraying were found non-significant for most of the seed yield and quality parameters.

scholarly journals Effect of Vermicomposting and Composting of Municipal Solid Waste (MSW) on Growth, Yield and Quality of Chickpea

2020 ◽  
pp. 126-136
Author(s):  
C. Chetankumar ◽  
P. H. Vaidya ◽  
S. P. Zade
Keyword(s):  
Field Experiment ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Block Design ◽  
Growth Yield ◽  
Quality Parameters ◽  
Growth Stages ◽  
Yield And Quality ◽  
Randomized Block Design

The present investigation was undertaken with an objective to understand the effect of municipal solid waste (MSW) vermicompost and compost on growth, yield and quality of chickpea. The experiment was laid in randomized block design with three replications and seven treatments  viz, T1 - RDF, T2 - RDF + vermicompost of MSW @ 2.5 t ha-1, T3 - RDF + vermicompost of MSW @ 5 t ha-1, T4 - RDF + vermicompost of MSW @ 7.5 t ha-1, T5 - RDF + compost of MSW @ 2.5 t ha-1, T6 -compost of MSW @ 5 t ha-1, T7 -compost of MSW @ 7.5 t ha-1. The field experiment was conducted at College of Agriculture, Latur farm during the Rabi season 2016-2017. The recommended dose of fertilizer (25:50:00 N: P: K) and MSW vermicompost and compost was applied at the time of sowing. The results of field experiment revealed that the maximum availability of macro and micronutrients in soil, growth attributes viz. plant height and number of branches in all growth stages of chickpea were found at application of 7.5 tones of MSW vermicompost ha-1 along with 100% RDF (25:50:00 NPK) followed by application of 7.5 tones MSW compost ha-1 along with 100% RDF and which was significantly increased with increased levels of MSW vermicompost and compost. Similar trend was observed in case of yield and quality parameters viz., protein content of chickpea.

scholarly journals Influence of varieties and spacing on yield and quality of sprouting broccoli (Brassica oleracea L.)

2021 ◽  
pp. 108-111
Author(s):  
PRADEEP KUMAR
Keyword(s):  
Brassica Oleracea ◽  
Block Design ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Rabi Season ◽  
Total Soluble Solids ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Brassica Oleracea L

A field experiment was undertaken at B.B.A. University, Lucknow (UP) during rabi season to study the effect of varieties and spacings on yield and quality characters of sprouting broccoli (Brassica oleracea L. var. italica Plenck). Four varieties viz. V1- Pusa Broccoli KTS-1, V2-Palam Kanchan , V3-Palam Vichitra , V4-Palam Samridhi and four spacings viz.- S1- 60x45 cm, S2 - 60×30 cm, S3 - 45×45 cm, S4 - 45×30 cm were evaluated in factorial randomized block design with three replications. Among the varieties, Pusa Broccoli KTS-1had takenearliest days for curd initiation (47.9) and day taken to curd harvest after curd initiation (22.5). Variety Pusa Broccoli KTS-1 significantly produced the highest curd diameter (118.9 mm),weight of curd with gourd leaf(0.9kg), weight of curd without gourd leaf (0.4 kg), yield (24.5 tha-1),ascorbic acid (79.1 mg/100g) and total soluble solids (8.5oBrix). On the other hand, minimum values of these parameters were recorded in Pusa Samridhi. Spacing of 60x45 cm took minimum days (48.9) for curd initiation, (22.5) and days taken to curd harvest after curd initiation. Maximum curd diameter (116.8 mm), weight of curd with gourd leaf (0.9 kg), weight of curd without gourd leaf (0.4 kg) were recorded in 60x45 cm spacing. Quality parameters were also markedly affected with variety Pusa Broccoli KTS-1 and spacing 60x45 cm and relatively higher value of vitamin C (79.9 mg/100g) and total soluble solids (8.80Brix) were recorded under V1S1 treatment.

scholarly journals Melon fruit yield and quality as a function of doses and times of biostimulant application

2020 ◽  
Vol 9 (7) ◽  
pp. e130973911
Author(s):  
Roberto Cleiton Fernandes de Queiroga ◽  
Zaqueu Lopes da Silva ◽  
Odair Honorato Oliveira de ◽  
Elidayane da Nóbrega Santos ◽  
Higínio Luan Oliveira Silva ◽  
...  
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Soluble Solids ◽  
Application Time ◽  
Time Of Application ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Semi Arid Region ◽  
Fruit Mass

The objective of this study was to evaluate the productivity and quality of melon fruits as a function of the dose and time of application of biostimulant in the conditions of the semi-arid region of Paraíba. The experiment was carried out at the Federal University of Campina Grande, campus of Pombal - PB, Brazil, in a randomized block design in a 4 x 5 split plot scheme, with doses of biostimulant (0; 0.5; 1.0; 1, 5 and 2.0 L ha-1) and in the subset of the biostimulant application times (15; 20; 25 and 30 days before harvest - DAC), in four replications. Characteristics related to fruit production and quality were evaluated. There was no interaction between the factors of dose and application time of the biostimulant in any of the evaluated characteristics. Thus, the highest estimated values of number of fruits per plant, fruit mass and total melon production were obtained with the application of doses ranging from 0.9 to 1.5 L ha-1 and at the time of application it varied from 22,5 to 23.6 DAC. The content of soluble solids increased 5.5% when the biostimulant dose of 2.0 L ha-1 was used and 4.4% when the product was applied 15 days before harvest.

Sign in / Sign up

Export Citation Format

Share Document