scholarly journals ORAL DELIVERY OF ZOLMITRIPTAN LOADED FAST DISINTEGRATING FILM: FORMULATION DEVELOPMENT, STATISTICAL OPTIMIZATION, IN-VITRO AND IN-VIVO EVALUATION

2019 ◽  
pp. 13-22 ◽  
Author(s):  
Iti Chauhan ◽  
Mohammad Yasir ◽  
Madhu Verma
Keyword(s):  
Oral Delivery ◽  
Stability Study ◽  
In Vivo Studies ◽  
Pharmacokinetic Parameters ◽  
Albino Rats ◽  
Formulation Development ◽  
In Vivo Evaluation ◽  
Disintegration Time

Introduction: Fast dissolving film technology has been developed out as a alternative drug delivery system that gives an exception advantage for taking medications. Objective: The aim of this study was to formulate and evaluate the Zolmitriptan loaded fast disintegrating oral film by solvent casting method. Material and methods:  A preliminary study was conducted to select a suitable film forming polymer and plasticiser concentration.The formulation was optimized with the help of 22 factorial designs in which polymer and plasticizer concentration at two levels was taken as independent factors and disintegration time, tensile strength and % elongation were taken as dependent factors. The optimized formulation OP1 was subjected to stability study as per the ICH guidelines at 40 ± 0.50C / 75 ± 5% RH for six months. In vivo studies were conducted on Wister albino rats and concentration of drug in blood was analysed by HPLC technique. Various pharmacokinetic parameters for OP1 were determined and compared with reference formulation (drug sol.). Result and Discussion: For optimized formulation various parameters were found to be in acceptable range and it was stable under specified conditions. The value of AUC0–t (ng h/ml), AUC0–∞ (ng h/ml) of the OP1 was found to be 723.91± 84.21, 770.90 ± 104.32, respectively, for the drug sol 468.56 ± 79.36, 500.37 ± 95.43 respectively. Relative bioavailability of OP1 was 1.55 time than that of drug sol. Conclusion: The formulation not only increases the bioavailability of drug but also produce the quick action for the migraine patients. 

Pharmacokinetic Profile of Oxaliplatin-Loaded pH-Responsive Hydrogels in Rabbits

2020 ◽  
Vol 26 (44) ◽  
pp. 5755-5763
Author(s):  
Kaleem Ullah ◽  
Shujaat Ali Khan ◽  
Muhammad Sohail ◽  
Abdul Mannan ◽  
Ghulam Murtaza
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Oral Solution ◽  
In Vivo Studies ◽  
Pharmacokinetic Parameters ◽  
Platinum Compound ◽  
In Vivo Evaluation ◽  
Significant Difference

Background: Oxaliplatin (OXP), a 3rd generation platinum compound, which causes severe side effects due to; impulse high concentration in the bloodstream thereby exposing healthy cells at a high ratio, nonspecific delivery at the target site and non-compliance is administered intravenously. Objective: The project was aimed at the development, characterization, and in-vitro and in-vivo evaluation of pHresponsive hydrogels for oral administration of OXP. Methods: Hydrogel formulations were synthesized through a free radical polymerization technique followed by brief characterization using various techniques. The hydrogels were investigated for various in-vitro studies such as sol-gel, drug loading, swelling, drug release, and MTT-assay. While in-vivo studies such as oral tolerability, histopathology, and hematology studies were performed on rabbits. A simple and sensitive HPLC-UV method was optimized and the comparative pharmacokinetic study was performed in rabbits using OXP-oral solution and OXP-loaded hydrogels. Results: In-vitro characterization confirmed that the reactant was successfully crosslinked to form thermally stable hydrogels with decreased crystallinity and rough surface. Swelling and drug release showed that hydrogels were more responsive to basic pH (6.8 and 7.4) in comparison with pH 1.2. The blank hydrogels were cytocompatible as more than 95% of the cells were viable while free OXP and OXP-loaded hydrogels displayed dosedependent cytotoxic effect. In-vivo studies confirmed that chitosan and gelatin hydrogel suspension was well tolerable up to 3800 mg/kg and 4000 mg/kg of body weight, respectively. Hematology and serum chemistry reports were well within the range suggesting normal liver and kidney functions. Similarly, histopathology slides of rabbit vital organs were also found normal without causing any histopathological change. Conclusion: HPLC-UV method was successfully optimized for OXP detection in oral solution and hydrogels administered to rabbits. A significant difference was found among various pharmacokinetic parameters by comparing the two groups including half-life (t1/2), tmax, Cmax, AUCtot MRT, Vz, and Lz.

Core–shell hybrid nanocapsules for oral delivery of camptothecin: formulation development, in vitro and in vivo evaluation

2015 ◽  
Vol 17 (1) ◽  
Author(s):  
Hale Ünal ◽  
Ivana d’Angelo ◽  
Ester Pagano ◽  
Francesca Borrelli ◽  
Angelo Izzo ◽  
...  
Keyword(s):  
Oral Delivery ◽  
Core Shell ◽  
Formulation Development ◽  
In Vivo Evaluation ◽  
Development In Vitro

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Biopharmaceutical and Preclinical Studies of Zaleplon as Semisolid Dispersions with Self-emulsifying Lipid Surfactants for Oral Delivery

1970 ◽  
Vol 9 (1) ◽  
pp. 3102-3111
Author(s):  
Narendar Dudhipala ◽  
Arjun Narala ◽  
Dinesh Suram ◽  
Karthik Yadav Janga
Keyword(s):  
Oral Delivery ◽  
Molecular State ◽  
In Vivo Studies ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Phase Solubility ◽  
Microscopic Studies ◽  
Pure Drug

The objective of this present study is to develop a semisolid dispersion (SSD) of zaleplon with the aid of self-emulsifying lipid based amphiphilic carriers (TPGS E or Gelucire 44/14) addressing the poor solubility of this drug. A linear relationship between the solubility of drug with respect to increase in the concentration of lipid surfactant in aqueous medium resulting in AL type phase diagram was observed from phase solubility studies. Fusion method was employed to obtain semisolid dispersions (SSD) of zaleplon which showed high content uniformity of drug. The absence of chemical interactions between the pure drug, excipients and formulations were conferred by Fourier transmission infrared spectroscopic examinations. The photographic images from polarized optical microscopic studies revealed the change in crystalline form of drug to amorphous or molecular state. The superior dissolution parameters of zaleplon from SSD over pure crystalline drug interpreted from in vitro dissolution studies envisage the ability of these lipid surfactants as solubility enhancers. Further, the caliber of TPGS E or Gelucire 44/14 in encouraging the GI absorption of drug was evident with the higher human effective permeability coefficient and fraction oral dose of drug absorbed from SSD in situ intestinal permeation study. In conclusion, in vivo studies in Wister rats demonstrated an improvement in the oral bioavailability of zaleplon from SSD over control pure drug suspension suggesting the competence of Gelucire 44/14 and TPGS E as conscientious carriers to augment the dissolution rate limited bioavailability of this active

Cationic Diclofenac Lipid Nanoemulsion for Improved Oral Bioavailability: Preparation, Characterization and In Vivo Evaluation

2015 ◽  
Vol 8 (2) ◽  
pp. 2874-2880
Author(s):  
Kishan Veerabrahma ◽  
Swapna Madishetty ◽  
Muzammil Afzal Syed ◽  
Prabhakar Kandadi
Keyword(s):  
Oral Bioavailability ◽  
Physical Stability ◽  
Cationic Lipid ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Pharmacokinetic Parameters ◽  
In Vivo Evaluation ◽  
Drug Content ◽  
Lipid Nanoemulsion

Cationic nanoemulsions were reported to have increased bioavailability. The aim of present study was to prepare a cationic lipid nanoemulsion of diclofenac acid (LNEs) for improved oral bioavailability to treat arthritic conditions. The LNEs of diclofenac acid were prepared by using soya bean oil, egg lecithin, cholesterol and stearylamine. Stearylamine was used as positive charge inducer. The LNEs were processed by homogenization and ultrasonication. The formulation composition was selected based on earlier reports. The LNEs were characterized for size and zeta potential. The physical stability of LNEs was studied using autoclaving, centrifugal, desorption (dilution effect) stresses and on storage. The total drug content and entrapment efficiency were determined using HPLC. During in vivo studies in Wistar rats, the pharmacokinetic parameters of LNEs were compared with a prepared diclofenac suspension in sodium CMC mucilage. The selected formulations, F1, F2 and F3, were relatively stable during centrifugal stress, dilution stress and on storage. The drug content was found to be 2.38 ± 1.70 mg/ml for F1, 2.30 ± 0.82 mg/ml for F2, and 2.45 ± 0.66 mg/ml for F3. The entrapment efficiencies were 97.83 ± 0.53%, 97.87 ± 1.22% and 98.25 ± 0.21% for F1, F2 and F3 respectively. The cumulative percentage drug release from F1, F2 and F3 showed more release in pH 6.8 phosphate buffer than in pH 1.2 HCl. During oral bioavailability studies, the LNEs showed higher serum concentrations than a suspension. The relative bioavailability of the LNE formulations F1, F2 and F3 were found to be 2.35, 2.94 and 6.28 times that of F4 suspension and were statistically significant. Of all, the cationic lipid nanoemulsion (F3) was superior in improving bioavailability, when compared with plain emulsion (F1) and cholesterol containing LNE (F2). The study helps in designing the cationic oral nanoemulsions to improve the oral bioavailability of diclofenac.

Synthesis, Characterization and in vivo Evaluation of PEGylated PPI Dendrimer for Safe and Prolonged Delivery of Insulin

2019 ◽  
Vol 9 (3) ◽  
pp. 248-263 ◽  
Author(s):  
Ashish K. Parashar ◽  
Preeti Patel ◽  
Arun K. Gupta ◽  
Neetesh K. Jain ◽  
Balak Das Kurmi
Keyword(s):  
Blood Glucose ◽  
Drug Release ◽  
Blood Glucose Level ◽  
Glucose Level ◽  
Albino Rats ◽  
Sustained Delivery ◽  
In Vivo Evaluation ◽  
Hemolytic Toxicity

Background: The present study was aimed at developing and exploring the use of PEGylated Poly (propyleneimine) dendrimers for the delivery of an anti-diabetic drug, insulin. Methods: For this study, 4.0G PPI dendrimer was synthesized by successive Michael addition and exhaustive amidation reactions, using ethylenediamine as the core and acrylonitrile as the propagating agent. Two different activated PEG moieties were employed for PEGylation of PPI dendrimers. Various physicochemical and physiological parameters UV, IR, NMR, TEM, DSC, drug entrapment, drug release, hemolytic toxicity and blood glucose level studies of both PEGylated and non- PEGylated dendritic systems were determined and compared. Results: PEGylation of PPI dendrimers caused increased solubilization of insulin in the dendritic framework as well as in PEG layers, reduced drug release and hemolytic toxicity as well as increased therapeutic efficacy with reduced side effects of insulin. These systems were found to be suitable for sustained delivery of insulin by in vitro and blood glucose-level studies in albino rats, without producing any significant hematological disturbances. Conclusion: Thus, surface modification of PPI dendrimers with PEG molecules has been found to be a suitable approach to utilize it as a safe and effective nano-carrier for drug delivery.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals FORMULATION, IN VITRO, AND IN VIVO EVALUATION OF TASTE-MASKED ORAL DISINTEGRATING TABLETS OF FEXOFENADINE HYDROCHLORIDE USING SEMISYNTHETIC AND NATURAL SUPERDISINTEGRANTS

2021 ◽  
pp. 99-108
Author(s):  
NAGADANI SWARNALATHA ◽  
VIDYAVATHI MARAVAJHALA
Keyword(s):  
Desirability Function ◽  
Research Work ◽  
In Vivo Studies ◽  
Taste Masking ◽  
Wet Granulation ◽  
Maximum Plasma ◽  
In Vivo Evaluation ◽  
Eudragit Epo

Objective: The aim of the present research work was to prepare and evaluate taste-masked oral disintegrating tablets (ODT) of Fexofenadine hydrochloride. Methods: In the present work, Eudragit EPO, a taste masking agent and Karaya gum (GK) (natural), Sodium starch glycolate, and Croscarmellose sodium (CCS) (semi-synthetic) super disintegrants in three ratios (3, 6,9%) were used. Taste masked granules were prepared by different ratios of the drug: Eudragit EPO (1:1, 1:1.5, 1:2) by wet granulation method. The optimized taste-masked granules (1:2) were selected by sensory evaluation test to prepare 9 Fexofenadine ODT (FH1-FH9) formulations. These were evaluated for different parameters. Then desirability function (DF) was calculated for all formulations using disintegration time (DT), time taken for the tablet to release 90% of the drug (t 90%), and % drug dissolved in 10 min (Q10) as significant parameters. Results: The best formulation (FH6) showed the highest DF value due to less DT and 100% in vitro drug release within 15 min. Thus, FH6 formulation containing 9% CCS was selected as the best among the prepared formulations to which in vivo studies were performed on rabbits to find maximum plasma concentration (Cmax), time taken to reach maximum concentration (tmax), area under the curve (AUC), rate of elimination (Kel), absorption rate (Ka) and half-life(t1/2) and compared with Fexofenadine (Allegra) marketed tablets. Total bioavailability was increased for the test formulation compared to the reference formulation. Conclusion: Fexofenadine was successfully prepared as ODT with increased AUC and decreased tmax to which stability studies were conducted which were found to be stable.

Sign in / Sign up

Export Citation Format

Share Document