scholarly journals STUDI KELAYAKAN PEMBANGKIT LISTRIK TENAGA MINI HIDRO DI SUNGAI MANULA KECATAMAN PUGUNG KABUPATEN PESISIR BARAT LAMPUNG

2019 ◽  
Author(s):  
Rosnita Rauf

FEASIBILITY STUDY OF MINI HIDRO POWER PLANT IN THE RIVER MANULA PUGUNG COUNTRYDISTRICT OF WEST COASTAL LAMPUNGRosnita Rauf*), Helny Lalan, and BudimanDepartment of Electrical Engineering, Faculty of Engineering & Planning, Ekasakti UniversityJl. Veterans Dalam No. 26 B, PadangAbstractThe increase in demand for adequate supply of electricity increases with the increase in population. The energy source used today is from PT. PLN Persero. To generate electricity to this day is still dominated by fossil fuels, which is a source of energy that can not be renewed and not environmentally friendly. The Mini Hydro Power Plant is a renewable and environmentally friendly energy source that has the potential to replace fossil fuels. In this research, a feasibility study of mini hydro power plant which is located in West Coast Pesisir Regency of Lampung. This feasibility study, which we need to measure is the number of reliable water debit contained in one of the rivers of Bukit Barisan Selatan National Park (TNBBS). The results showed that Manula river water discharge was Q = 20,32 m3 / s and Beda height or Head = 98 meter able to generate minimum power equal to 17,97 MW. From the results of power that can be generated, mini hydro power plant is feasible to be realized, but the need for further financial review.

Author(s):  
Sudarman Sudarman ◽  
Wahyu Guszolil ◽  
Daryono Daryono ◽  
Muhammad Lukman

Micro Hydro Power (MHP) Plant is a small-scale power plant under 100 kW. Generally, MHP is built in a place that the electricity network has not touched. Many waterfalls in Taji Village are only used as tourist attractions. One of them is Coban Jahe waterfall which has a water discharge of 0.60567 m3/s in the dry season. Waterfall in Coban Jahe was used and planned as Micro Hydro Power Plant, it was called as MHP. Potential electric power generated from the MHP Coban Jahe Waterfall is 14.0368 kW with an effective head of 3.4742 m. The results show from the financial analysis, the construction of MHP is quite feasible with NPV of Rp. 45,676,769, BCR of 1.0852, which means it is feasible to be continued, the Payback Period is 9 years which does not exceed the project life, and the IRR obtained is 10,0087% which the projects are feasible and profitable to build.


2021 ◽  
Vol 4 (2) ◽  
pp. 22-26
Author(s):  
Hadi Santoso ◽  
Eris Santoso ◽  
Ruslim Ruslim

The supply of electrical energy in Tarakan City, North Kalimantan, still relies on diesel power which uses a limited number of petroleum energy sources. There is a need for research related to renewable energy sources that have the potential to become alternative energy for the people of Tarakan City. Water is an energy source that has great potential to generate electricity. The energy source that should be taken into account is micro-hydro which can be used as a Micro-hydro Power Plant (PLTMH). A survey of micro-hydro sources in Tarakan City, precisely in the Karungan area, East Mamburungan Village, has been carried out with the direct measurement method of water discharge and the relationship with the power generated. The result shows the water source has a discharge 0.00034 m3/ s, the water velocity of 0.035 m/s and generates power only up to 1.1 watts. Based on the power obtained, the water source in this place cannot be used as a source of micro-hydro energy, but has the potential as a source of pico-hydro energy.


2015 ◽  
Vol 74 ◽  
pp. 404-413 ◽  
Author(s):  
Zeina Bitar ◽  
Imad Khamis ◽  
Ziad Alsaka ◽  
Samih Al Jabi

2020 ◽  
Vol 2 (2) ◽  
pp. 30-38
Author(s):  
Susanto Ointu ◽  
Frengki Eka Putra Surusa ◽  
Muammar Zainuddin

Listrik merupakan kebutuhan yang sangat berperan penting bagi kehidupan manusia. Sehingga itu rencananya diwilayah terpencil tersebut akan diadakan pembangkit listrik yang ramah lingkungan, dan juga termasuk energi terbarukan. Kecamatan Pinogu terdapat bendungan untuk bisa dimanfaatkan sebagai sumber Pembangkit Listrik Tenaga Mikrohidro (PLTMH). Tujuan dari penelitian ini adalah untuk mengetahui seberapa besar potensi air untuk menghasilkan energi listrik pada bendungan yang dapat menunjang elektrifikasi di Desa Pinogu Kecamatan Pinogu Kabupaten Bone Bolango. Metode yang digunakan dalam menghitung debit air pada bendungan tersebut dengan metode apung dan pengukuran menggunakan stopwatch. Berdasarkan hasil pengukuran pada lokasi bendungan di Desa Pinogu Kecamatan Kabupaten Bone Bolango, menghasilkan potensi air dengan debit air maksimal sebesar 1,67 m3/detik, dengan tinggi terjun 3,57 meter, maka total daya maksimal yang diperoleh adalah 29,83 KW dan dapat melayani 99 rumah dengan daya masing-masing rumah sebesar 300 Watt.Kata Kunci — studi kelayakan, PLTM, Desa Pinogu.Electricity is a necessity that plays an important role in human life. So that the plan is in the remote region will be held power plants that are environmentally friendly, and also include renewable energy. Pinogu Subdistrict has a dam to be used as a source of Micro Hydro Power Plant (PLTMH). The purpose of this study is to find out how much the potential of water to produce electrical energy in dams that can support electrification in Pinogu Village, Pinogu District, Bone Bolango Regency. The method used in calculating the flow of water in the dam with the floating method and measurement using a stopwatch. Based on the results of measurements at the location of the dam in Pinogu Village, District of Bone Bolango District, it produces water potential with a maximum water discharge of 1.67 m3 / sec, with a waterfall height of 3.57 meters, then the total maximum power obtained is 29.83 KW and can serves 99 homes with a power of 300 Watt each.Keywords - feasibility study, PLTM, Pinogu Village.


2018 ◽  
Vol 1 (1) ◽  
pp. 20
Author(s):  
S Umar Djufri

The city of Jambi is dibentangi River batanghari, study on utilization of renewable electricity in particular an against water power through Streams need to be consider for perencanan Micro Hydro power plant (PLTMH). Water conditions that can be utilized as a resource (resources) electric generator has a capacity of flow and elevation of water channel system. The main problems in hydropower generation is the availability of water of the river discharge as energy for propulsion power plant. Therefore it takes a specific technique to predict the potential flow of river water on all the time or signature debit River that can be used for energy micro hydro power plant, not the onset of rain with a long time as well as the condition of watersheds (DAS) that can cause critical flow of river water into small even dried up. River discharge measurements manually at any given time can only represent the volume of discharge of the River at the time of measurement is performed. Changes that occur due to the onset of rain in the next time, or decrease in discharge of the River because the groundwater deposits shrink, can not be observed with either it needs to be planned debit kontiniu for turbine generator round capacity taking into account the capacity of electricity from generators that can be optimally raised


2018 ◽  
Vol 17 (3) ◽  
pp. 393
Author(s):  
I Putu Juliana ◽  
Antonius Ibi Weking ◽  
Lie Jasa

The dependence of power plants on energy sources such as diesel, natural gas and coal is almost 75%, encouraging the development of renewable energy in an effort to meet the electricity supply. One of them is the micro hydro power plant by utilizing the potential of existing water. The working principle of PLTMH is to change the potential energy of water into electrical energy. In this final project has been designed modeling of micro hydro power plant by using screw turbine (Archimedes Screw). The turbine used resembles a drill bit, with a diameter of a turbine of 26 cm, a screw width of 10 cm, and an amount of 10 pieces of blade. Measurements made on the modeling of micro hydro power plants include: water discharge, turbine rotation, generator rotation, voltage, current, torque and generator output power and efficiency. The parameters are measured by changing the water fall on the turbine from the position of the turbine head angle 00, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 700, 800  and 900 . The result of measurement that has been done on the parameters of micro hydro power plant modeling, obtained the highest measurement result at the corner of turbine head 400. The output power generated is 10.92 watts, torque is 0.60 Nm and efficiency of 14%. The results obtained are still low because the turbine rotation is less able to rotate the generator, where the generator torque is greater than the torque in the turbine. This is influenced by the small water discharges in the modeling of this micro hydro power plant.


Author(s):  
Hidayat ◽  
Azriyenni Azhari Zakri ◽  
Iman Satria

The feasibility study is one of the principal documents in building a hydropower plant consisting of technical, economic, and financial aspects. Contained technical studies on civil, mechanical, and electrical. This requires data on hydrologic, geology, land contours, river discharge, water catchment areas, and so on. Economic and financial studies include cost and financial parameters such as; BEP, IRR, NVP, BCR, and others. The installed capacity of a hydropower plant is given in optimization based on the Flow Duration Curve (FDC) and the Capacity Factor (CF) used the Newton Interpolation Method. The results showed that the installed power capacity was 11.99 MW. The water discharge was 31.603 m3/secs and the effective head was 37.5 meters. Annual income is around IDR 103.026 billion. Finally, HPP Lubuak Gadang is technically, economically, and financially feasible, so it is feasible to carry out the next process.


Author(s):  

Issues of the contraflows formation in the Votkinsk Reservoir (the middle one in the sequence of the Kama reservoirs) have been studied. The water discharge regime through the Kama Hydro Power Plant determines the contraflow occurrence. The importance of the contraflow issues is caused by the risk of contaminated waters input to water intakes located upstream in respect of the waste water outlets. One of the major industrial agglomeration, namely the Perm-Krasnokamsk cluster with numerous water intakes and waste water discharge points, is located in the upstream part of the Votkinsk Reservoir with is the downstream reach of the Kama Reservoir. On the basis of assessment of the contraflows scale and the consequences for water users the water/economic and environmental limitations are set for the power plant operation regime including sanitary discharge volumes. The contraflows have been simulated as a result of digital solution of the Saint-Venant equation in 1D-definintion with input of the first type boundary conditions directly in the vicinity of the Votkinsk Power Station dam. We have assessed the reservoir morphometry role in the contraflows formation. Outputs of the comparative experiments performed at different schematic models of the Votkinsk Reservoir have shown that reflection of the level lowering straight wave from the Votkinsk Power Station dam is the determining factor of the contraflows formation rather than peculiarities of the morphometry. When decreasing the period of water discharge to the downstream reach the zone of contraflows formation is displacing towards the Votkins Power Plant dam.


Sign in / Sign up

Export Citation Format

Share Document