Understanding biofuel production systems from an economic and environmental perspective

2016 ◽  
Author(s):  
Longwen Ou
Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 69
Author(s):  
Aldric S. Tumilar ◽  
Dia Milani ◽  
Zachary Cohn ◽  
Nick Florin ◽  
Ali Abbas

This article describes a unique industrial symbiosis employing an algae cultivation unit (ACU) at the core of a novel eco-industrial park (EIP) integrating fossil-fuel fired power generation, carbon capture, biofuel production, aquaculture, and wastewater treatment. A new modelling framework capable of designing and evaluating materials and energy exchanges within an industrial eco-system is introduced. In this scalable model, an algorithm was developed to balance the material and energy exchanges and determine the optimal inputs and outputs based on the industrial symbiosis objectives and participating industries. Optimizing the functionality of the ACU not only achieved a substantial emission reduction, but also boosted aquaculture, biofuel, and other chemical productions. In a power-boosting scenario (PBS), by matching a 660 MW fossil fuel-fired power plant with an equivalent solar field in the presence of ACU, fish-producing aquaculture and biofuel industries, the net CO2 emissions were cut by 60% with the added benefit of producing 39 m3 biodiesel, 6.7 m3 bioethanol, 0.14 m3 methanol, and 19.55 tons of fish products annually. Significantly, this article shows the potential of this new flexible modelling framework for integrated materials and energy flow analysis. This integration is an important pathway for evaluating energy technology transitions towards future low-emission production systems, as required for a circular economy.


2014 ◽  
Vol 61 ◽  
pp. 25-45 ◽  
Author(s):  
Janske van Eijck ◽  
Henny Romijn ◽  
Edward Smeets ◽  
Rob Bailis ◽  
Martijn Rooijakkers ◽  
...  

2009 ◽  
Vol 7 (46) ◽  
pp. 703-726 ◽  
Author(s):  
H. C. Greenwell ◽  
L. M. L. Laurens ◽  
R. J. Shields ◽  
R. W. Lovitt ◽  
K. J. Flynn

Microalgae provide various potential advantages for biofuel production when compared with ‘traditional’ crops. Specifically, large-scale microalgal culture need not compete for arable land, while in theory their productivity is greater. In consequence, there has been resurgence in interest and a proliferation of algae fuel projects. However, while on a theoretical basis, microalgae may produce between 10- and 100-fold more oil per acre, such capacities have not been validated on a commercial scale. We critically review current designs of algal culture facilities, including photobioreactors and open ponds, with regards to photosynthetic productivity and associated biomass and oil production and include an analysis of alternative approaches using models, balancing space needs, productivity and biomass concentrations, together with nutrient requirements. In the light of the current interest in synthetic genomics and genetic modifications, we also evaluate the options for potential metabolic engineering of the lipid biosynthesis pathways of microalgae. We conclude that although significant literature exists on microalgal growth and biochemistry, significantly more work needs to be undertaken to understand and potentially manipulate algal lipid metabolism. Furthermore, with regards to chemical upgrading of algal lipids and biomass, we describe alternative fuel synthesis routes, and discuss and evaluate the application of catalysts traditionally used for plant oils. Simulations that incorporate financial elements, along with fluid dynamics and algae growth models, are likely to be increasingly useful for predicting reactor design efficiency and life cycle analysis to determine the viability of the various options for large-scale culture. The greatest potential for cost reduction and increased yields most probably lies within closed or hybrid closed–open production systems.


2020 ◽  
Vol 93 (8) ◽  
pp. 9-12
Author(s):  
D. Ciolkosz ◽  

Ukraine produces large amounts of crop residues every year, much which could be utilized to produce biofuel. However, efficient supply chains and system configurations are needed to make such systems efficient and cost effective. One option is to integrate torrefaction, power production and biofuel production into a single, coordinated system. This approach allows for high value product (i.e. biofuel), greater utilization of the energy content of the feedstock, and supply chain efficiency. Initial analyses indicate that revenues can be enhanced through this approach, and further analyses and optimization efforts could identify a sustainable approach to renewable fuel and power production for Ukraine. The question of scale and layout remains of interest as well, and a thorough logistical study is needed to identify the most suitable configuration. Agricultural operations often benefit from smaller scales of operation, whereas fuel production processes tend to operate profitably only at very large scale. Thus, a balance must be struck between the needs of both ends of the supply chain. The processing center concept helps to balance those needs. A system such as this also has potential to synergize with other agricultural production systems, such as the production of animal feed, fertilizer, and other bio-based products. The complexities of the Ukrainian agricultural market will need to be reflected carefully in any model that seeks to assess the system's potential. Presents a concept for coupling thermal pretreatment (torrefaction with biofuel and power production for the transformation of wheat straw into a value added product for Ukraine. Torrefaction provides supply chain savings, while conversion provides added value to the product. This paradigm has potential to utilize a widely produced waste material into a valuable source of energy and possibly other products for the country.


2010 ◽  
Vol 17 (3) ◽  
pp. 220-236 ◽  
Author(s):  
Douglas A. Landis ◽  
Benjamin P. Werling

Author(s):  
Jesús Andrés Tavizón-Pozos ◽  
Israel S. Ibarra ◽  
Alfredo Guevara-Lara ◽  
Carlos Andrés Galán-Vidal

Biofuels emerge as an alternative to mitigate climate change. In this sense, four biofuels generations have been proposed to produce clean and renewable fuels. To achieve this, the development of these fuels requires an extensive and rigorous experimental work that will bring optimal results in short time periods. Hence, to accelerate the development of clean fuels, the Design of Experiments (DoE) methodologies are a useful tool to improve the operational conditions such as temperature, time, pressure, and molar ratios. Several authors have studied and optimized the different biofuel production systems using Factorial Designs and Response Surface Design methods and statistical analysis with reliable results. This chapter reviews and classifies the results obtained by these investigations and demonstrates the scopes and limitations of the application of DoE.


2010 ◽  
Vol 15 (10) ◽  
pp. 554-564 ◽  
Author(s):  
Evan Stephens ◽  
Ian L. Ross ◽  
Jan H. Mussgnug ◽  
Liam D. Wagner ◽  
Michael A. Borowitzka ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document