scholarly journals Synthesis and evaluation of B-cyclodextrin Based Nanosponges of 5- Fluorouracil by Using Ultrasound Assisted Method

2020 ◽  
Vol 29 (2) ◽  
pp. 88-98
Author(s):  
Ihsan K. Jasim ◽  
Shaimaa N. Abd Alhammid ◽  
Alaa A. Abdulrasool
Keyword(s):  
Particle Size ◽  
In Vitro Release ◽  
Particle Morphology ◽  
Entrapment Efficiency ◽  
Molar Ratio ◽  
Phase Solubility ◽  
Molar Ratios ◽  
Phase Solubility Study ◽  
Ultrasound Assisted

  CD-nanosponges were prepared by crosslinking B-CD with diphenylcarbonate (DPC) using ultrasound assisted technique. 5-FU was incorporated with NS by freeze drying, and the phase solubility study, complexation efficiency (CE) entrapment efficiency were performed. Also, the particle morphology was studied using SEM and AFM. The in-vitro release of 5-FU from the prepared nanosponges was carried out in 0.1N HCl. 5-FU nanosponges particle size was in the nano size. The optimum formula showed a particle size of (405.46±30) nm, with a polydispersity index (PDI) (0.328±0.002) and a negative zeta potential (-18.75±1.8). Also the drug entrapment efficiency varied with the CD: DPC molar ratio from 15.6 % to 30%. The SEM and AFM showed crystalline and porous nature of the nanosponges. The in vitro drug release study of the selected formula 5-FUNS2 exhibited the fastest dissolution rate which is 56% in the first hr. Different molar ratios of (cyclodextrin to crosslinker) (CD: DPC) has a proficient effect on complexation efficiency (CE), apparent stability constant (Kst) and entrapment efficiency of 5-FU. 5-FUNS2 with (1:4) molar ratio showed the best result of CE, Kst and entrapment efficiency. 5-FUNS2 gave a higher release rate than the 5-FU-BCD inclusion complex and 5-FU solution. Surface morphology of the prepared nanosponges by SEM, AFM indicate that nanosized and highly porous nanosponges was obtained. The overall results suggest that cyclodextrin nanosponges could be a promising 5-FU delivery system utilizing the suitable formula.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

scholarly journals NANO-VESICLES OF SALBUTAMOL SULPHATE IN METERED DOSE INHALERS: FORMULATION, CHARACTERIZATION AND IN VITRO EVALUATION

2017 ◽  
Vol 9 (6) ◽  
pp. 100 ◽  
Author(s):  
Mona G. Arafa ◽  
Bassam M. Ayoub
Keyword(s):  
In Vitro Release ◽  
Pulmonary Delivery ◽  
Entrapment Efficiency ◽  
Reversed Phase ◽  
Molar Ratio ◽  
Metered Dose Inhalers ◽  
Salbutamol Sulphate ◽  
Novel Approach ◽  
Metered Dose

Objective: The present work was aimed to prepare niosomes entrapping salbutamol sulphate (SS) using reversed phase evaporation method (REV).Methods: Niosomes were prepared by mixing span 60 and cholesterol in 1:1 molar ratio in chloroform, SS in water was then added to organic phase to form niosomal SS. Formulations after evaporation of chloroform, freeze centrifuged then lyophilized, were evaluated for particles size, polydispersity index (Pdi), zeta-potential, morphology, entrapment efficiency (EE%) and in vitro release. For pulmonary delivery; metered dose inhalers (MDI) were prepared by suspending SS niosomes equivalent to 20 mg SS in hydrofluoroalkane (HFA). The metered valve was investigated for leakage rate, the total number of puffs/canister, weight/puff, dose uniformity and particle size.Results: The results showed spherical niosomes with 400-451 nm particles that entrapped 66.19% of SS. 76.54±0.132% SS release from niosomes that showed a controlled release profile for 8h. The leakage test was not exceeding 4 mg/3 d, the number of puffs were up to 200puffs/canister, the dose delivered/puff was 0.1 mg and 0.64-4.51μm niosomal aerosol.Conclusion: The results indicate an encouraging strategy to formulate a controlled drug delivery by entrapping (SS) in niosomes which could be packaged into (MDI) that met the requirements of (USP) aerosols guidelines which offering a novel approach to respiratory delivery.

scholarly journals DEVELOPMENT, CHARACTERIZATION AND IN VITRO RELEASE KINETIC STUDIES OF IBANDRONATE LOADED CHITOSAN NANOPARTICLES FOR EFFECTIVE MANAGEMENT OF OSTEOPOROSIS

2021 ◽  
pp. 120-125
Author(s):  
S. PATHAK ◽  
S. P. VYAS ◽  
A. PANDEY
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Release Kinetics ◽  
Ph Effect ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective: The objective of the present study was to develop, optimize, and evaluate Ibandronate-sodium loaded chitosan nanoparticles (Ib-CS NPs) to treat osteoporosis. Methods: NPs were prepared by the Ionic gelation method and optimized for various parameters such as the effect of concentration of chitosan, sodium tripolyphosphate (TPP), and pH effect on particle size polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using particle size analyzer (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-Transform Infrared spectroscopy (FTIR).  Results: Formulated NPs were obtained in the average nano size in the range below 200 nm in TEM, SEM, and DLS studies. The particle size and encapsulation efficiency of the optimized formulation were 176.1 nm and 63.28%, respectively. The release profile of NPs was depended on the dissolution medium and followed the First-order release kinetics. Conclusion: Bisphosphonates are the most commonly prescribed drugs for treating osteoporosis in the US and many other countries, including India. Ibandronate is a widely used anti-osteoporosis drug, exhibits a strong inhibitory effect on bone resorption performed by osteoclast cells. Our results indicated that Ibandronate sodium-loaded chitosan nanoparticles provide an effective medication for the treatment of osteoporosis.

LINAGLIPTIN AND GLICLAZIDE DI-LOADED EXTENDED-RELEASE NANOPARTICLES: FORMULATION AND EVALUATION

2021 ◽  
Vol 74 (9) ◽  
pp. 2315-2322
Author(s):  
Firas Aziz Rahi ◽  
Muath Sheet Mohammed Ameen ◽  
Mohammed Shamil Fayyadh
Keyword(s):  
Particle Size ◽  
Xanthan Gum ◽  
Extended Release ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Hplc Method ◽  
Electronic Microscopy ◽  
Vitro Release

The aim: This work aimed to formulate gliclazide and linagliptin extended-release nanoparticles. Materials and methods: A HPLC method was developed and validated to determine gliclazide and linagliptin at the same time without interference. The nanoparticles were prepared by emulsion solvent evaporation using two polymers, namely hydroxypropyl methylcellulose (HPMC) 4000 cps and xanthan gum. Results: Nanoparticles prepared were characterized for drug contents, production yield and entrapment efficiency, zeta potential, particle size, morphology by transmission electronic microscopy (TEM) and in-vitro release rate. The formulae GLH1, GLX1 and GHX1 showed release of linagliptin more than 75% after 8 hrs. While the only formula among the three (GHX1) showed release of gliclazide more than 80% after 8 h. So, the formula GHX1 showed acceptable release of more than 80% of both gliclazide and linagliptin after 8 h. Conclusions: The formula GHX1 which containing (0.5:1 xanthan gum: drugs) was the best nanoparticles formula which released more than 80% of both drugs after 8 h and could achieve good extended release over 24 h.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals FLUCONAZOLE NANOGEL: FABRICATION AND IN VITRO EVALUATION FOR TOPICAL APPLICATION

2021 ◽  
pp. 272-277
Author(s):  
DIVYA ◽  
INDERBIR SINGH ◽  
UPENDRA NAGAICH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Seborrheic Dermatitis ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Flow Index ◽  
In Vitro Evaluation

Objective: The aim of this study is to develop and in vitro evaluation of prepared fluconazole nanogel for seborrheic dermatitis Methods: Fluconazole nanogel was formulated to act against seborrheic dermatitis. The fluconazole nanoparticles were prepared by a simplified evaporation method and evaluated for particle size, entrapment efficiency, and percent in vitro drug release. The nanogel was also characterized based on parameters like particle size, percent entrapment efficiency, shape surface morphology, rheological properties, in vitro release R² = 0.9046, and release kinetics. Results: The nanoparticle with a combination of Eudragit RS and Tween 80 showed the best result with particle size in the range of 119.0 nm to 149.5 nm, with a cumulative percent drug release of 95 % up to 18 h. The formulated nanogel with optimum concentration of HPMC authenticate with particle size 149.50±0.5 with maximum drug release (92.13±0.32) %. Conclusion: Different percentages of polymers (ethyl-cellulose, eudragit, and tween 80) are used as variable components in the formulation of nanogel. The optimized batch showed good physical properties (flow index, spreadability, and viscosity) along with rapid drug release. Therefore, it can be concluded that nanogel containing fluconazole has potential application in topical delivery.

scholarly journals DIACEREIN-LOADED NIOSOMES (DC-NS): A NEW TECHNIQUE TO SUSTAIN THE RELEASE OF DRUG ACTION

2022 ◽  
pp. 156-163
Author(s):  
RASHAD M. KAOUD ◽  
EMAN J. HEIKAL ◽  
TAHA M. HAMMADY
Keyword(s):  
Physical Stability ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Molar Ratios ◽  
Tween 40 ◽  
A New Technique ◽  
The Stability ◽  
Tween 60

Objective: The study's main goal is to develop a suitable niosomes (NS) encapsulated drug for anti-inflammatory effects such as diacerein (DC) and to evaluate the system's vesicle size (VS), entrapment efficiency (EE %), physical stability and in vitro release. Methods: Tween (40 and 60), cholesterol, and stearylamine were used in a 1:1:0.1 molar ratios as non-ionic surfactants. Thin film hydration was used to create the NS. Results: The higher EE% was observed with NS (F11) prepared from tween 60, cholesterol and 2.5 min sonication. These formulations' release patterns were Higuchi diffusion and first order. For the stability study, NS formulations were stored at temperature between 2-8 °C for 60 d retains the most drugs when compared to room and high temperature conditions. Conclusion: The findings of this study have conclusively shown that after NS encapsulation of DC, drug release is prolonged at a constant and controlled rate.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF CURCUMIN LOADED JACKFRUIT SEED STARCH NANOPARTICLES

2020 ◽  
pp. 32-35
Author(s):  
JUNMONI NATH
Keyword(s):  
Particle Size ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Infrared Studies ◽  
Drug Entrapment Efficiency ◽  
Starch Nanoparticles ◽  
Vitro Release

Objectives: To meet the above aim the following objectives are undertaken: (1) Isolation of starch from jackfruit seeds and formulation of curcumin loaded jackfruit seed starch nanoparticles (2) In vitro evaluations of the drug loaded nanoparticles Methods: Jackfruit seed starch nanoparticles were prepared by Nanoprecipitation technique. In this technique, jackfruit seed starch was mixed with curcumin and acetone solution using a magnetic stirrer at 600 rpm. To the above solution, water were added dropwise and stirred at room temperature until acetone was completely vaporized. Nanoparticles were separated by centrifugation at 4000 rpm after 40 min. Results: Particle size of prepared nanoparticle formulations was found to be 371 to 411.72 nm with PDI of 0.148 to 0.356. The maximum % drug entrapment was found to be 57.34 % with formulation F5. In vitro release studies showed sustained release of drug till 12 h. Conclusion: The prepared nanoparticles were evaluated for its particle size, drug entrapment efficiency, in vitro drug release study, and surface morphology studies by scanning electron microscopy. The results of Fourier transform infrared studies of 1:1 physical mixture of drug and excipients confirmed the absence of incompatibility. Thus, the study concludes that curcumin loaded jackfruit seed starch nanoparticles were developed successfully by nanoprecipitation, which is expected to enhance the oral bioavailability of curcumin.

Sign in / Sign up

Export Citation Format

Share Document