ACI TYPE CG-8M

Alloy Digest ◽  
1979 ◽  
Vol 28 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Austenitic Matrix ◽  
Considerable Resistance ◽  
Resistance To Stress ◽  
Petrochemical Industries ◽  
Iron Chromium

Abstract Type CG-8M is an iron-chromium-nickel-molybdenum alloy with excellent resistance to corrosion by reducing media; however, it is not suitable for use in nitric acid or other strongly oxidizing environments. Its normal microstructure after heat treatment consists of an austenitic matrix in which 15 to 35% ferrite is distributed in the form of discontinuous pools. This ferrite gives the alloy considerable resistance to stress-corrosion cracking and high strength at room and elevated temperatures. Typical uses are in the nuclear, textile and petrochemical industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-369. Producer or source: Various stainless steel casting companies.

CARLSON ALLOY C600 and C600 ESR

Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Fracture Toughness ◽  
Cold Working ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Resistance To Oxidation ◽  
Good Workability

Abstract CARLSON ALLOYS C600 AND C600 ESR have excellent mechanical properties from sub-zero to elevated temperatures with excellent resistance to oxidation at high temperatures. It is a solid-solution alloy that can be hardened only by cold working. High strength at temperature is combined with good workability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-470. Producer or source: G.O. Carlson Inc.

ALMANITE W

Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Impact Strength ◽  
Surface Treatment ◽  
High Hardness ◽  
Heat Treating ◽  
Austenitic Matrix ◽  
Matrix Type ◽  
Martensitic Matrix ◽  
Cast Condition

Abstract ALMANITE W comprises a series of three types of austenitic-martensitic white irons characterized by high hardness and relatively good impact strength. Type W1 has a pearlitic matrix. Type W2 has a martensitic matrix, Type W4 is highly alloyed to provide an austenitic matrix in the as-cast condition which may be further modified to give a martensitic matrix by heat treatment or by refrigeration. This datasheet provides information on composition, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-42. Producer or source: Meehanite Metal Corporation.

DOWMETAL ZK60A

Alloy Digest ◽  
1952 ◽  
Vol 1 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Grain Size ◽  
Corrosion Resistance ◽  
High Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Resistance To Stress ◽  
Extrusion Alloy

Abstract Dowmetal ZK60A is an ageable extrusion alloy for use where high strength magnesium extrusions with good toughness are required. It has small grain size, low notch sensitivity and a relatively high resistance to stress corrosion. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-1. Producer or source: The Dow Chemical Company.

FEDERATED F401.5Ni

Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Aluminum Casting ◽  
Aluminum Casting Alloy ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition

Abstract FEDERATED F401.5Ni is a heat-treatable aluminum casting alloy with high strength and good wear resistance in the fully heat-treated condition. It is recommended for castings requiring good strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-212. Producer or source: Federated Metals Corporation, ASARCO Inc..

UNILOY 888

Alloy Digest ◽  
1974 ◽  
Vol 23 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Magnetic Permeability ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
Magnetic Characteristics

Abstract UNILOY 888 is an iron-base, age-hardenable alloy designed primarily for applications requiring low magnetic permeability and high strength. It is austenitic at all times and its essentially non-magnetic characteristics are not impaired by various combinations of heat treatment and cold working used to produce desired mechanical properties. It is used primarily between 70 and 700 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Fe-51. Producer or source: Cyclops Corporation.

LESCALLOY 718 VAC-ARC

Alloy Digest ◽  
1965 ◽  
Vol 14 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance ◽  
Nickel Base ◽  
Super Alloy

Abstract LESCALLOY 718 VacArc is a precipitation hardening nickel-base super alloy designed for service at elevated temperatures up to 1300 F where high strength coupled with good ductility and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-102. Producer or source: Latrobe Steel Company.

CIRCLE LIN

Alloy Digest ◽  
1961 ◽  
Vol 10 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Nickel Base

Abstract CIRCLE LIN is a heat and corrosion resisting cast nickel-base alloy having high strength and resistance to oxidation at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-67. Producer or source: Lebanon Steel Foundry.

CARPENTER ALLOY 925

Alloy Digest ◽  
2007 ◽  
Vol 56 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
High Strength ◽  
Heat Treating ◽  
Technology Corporation ◽  
Resistance To Stress ◽  
Carpenter Technology Corporation

Abstract Carpenter Alloy 925 is an age-hardenable Ni-Fe-Cr alloy designed to resist corrosion while providing high strength. A combination of copper, titanium, molybdenum, and aluminum, in conjunction with nickel, provides excellent resistance to stress-corrosion cracking, pitting and crevice corrosion, and oxidizing and reducing environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-652. Producer or source: Carpenter Technology Corporation.

RESISTAC No. 1

Alloy Digest ◽  
1966 ◽  
Vol 15 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Corrosion Resistant ◽  
Increased Strength

Abstract Resistac No. 1 is a high strength, corrosion resistant aluminum bronze capable of responding to heat treatment for increased strength and hardness. It has exceptionally good fatigue resisting qualities and will retain its strength and hardness at relatively high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-2. Producer or source: American Manganese Bronze Company. Originally published October 1952, revised January 1966.

PANDEX VAC ARC

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PANDEX VAC ARC is a precipitation hardening, austenitic, heat resisting alloy designed for service at elevated temperatures where high strength and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-115. Producer or source: Latrobe Steel.

Sign in / Sign up

Export Citation Format

Share Document