RMI 5Al-2.5Sn ELI

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Room Temperature ◽  
Heat Treating ◽  
Pressure Vessels ◽  
Cryogenic Temperatures ◽  
Bend Strength ◽  
Temperature Performance ◽  
Alpha Titanium ◽  
Minimum Yield

Abstract RMI 5A1-2.5Sn ELI (ELI = Extra Low Interstitials) is an alpha titanium alloy that was developed for use at cryogenic temperatures. It has a guaranteed minimum yield strength of 100,000 psi at room temperature with good ductility and formability; its yield strength and elongation increase substantially as temperature is lowered. It is used successfully for high-pressure vessels at temperatures below -320 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-75. Producer or source: RMI Company.

JALLOY-S

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Trade Name ◽  
S 100 ◽  
Minimum Yield

Abstract Jalloy-S is the trade name of a group of constructional steels which combine high strength with welding and forming ease. They are available in three grades according to their minimum yield strength, namely, Jalloy-S-90, Jalloy-S-100, and Jalloy-S-110. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-144. Producer or source: Jones & Laughlin Steel Corporation.

AW-TEN

Alloy Digest ◽  
1966 ◽  
Vol 15 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Service Life ◽  
Yield Strength ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Superior Corrosion Resistance ◽  
Minimum Yield

Abstract AW-TEN is a high-strength structural steel offering 50,000 psi minimum yield strength, good formability and weldability, and superior corrosion resistance. It is intended primarily for weight reduction and longer service life. It is recommended for automobile and truck bodies, buildings, bridges, railway cars, booms, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-199. Producer or source: Alan Wood Steel Company.

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

RUUKKI OPTIM 600 MC

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract RUUKKI OPTIM 600 MC (600 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-175. Producer or source: Rautaruukki Corporation.

DOMEX 1200

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
High Strength Steels ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Vehicles ◽  
Cold Forming ◽  
Advanced High Strength Steels ◽  
Minimum Yield

Abstract Domex 1200 is a member of the Domex family of cold-forming steels, which are thermomechanically rolled and where all the processing is carefully controlled. The alloy is used in cold-formed and welded products and has a minimum yield strength of 1200 MPa (174 ksi). The Domex alloys are advanced high-strength steels that reduce the weight of heavy vehicles, trailers, cranes, and containers. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-605. Producer or source: SSAB Swedish Steel Inc.

DOMEX 960

Alloy Digest ◽  
2009 ◽  
Vol 58 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
High Strength Steels ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Vehicles ◽  
Cold Forming ◽  
Advanced High Strength Steels ◽  
Minimum Yield

Abstract Domex 960 is one fo the Domex family of cold-forming steels, which are thermomechanically rolled and where all the processing is carefully controlled. The alloy is used in cold-formed and welded products and has a minimum yield strength of 960 MPa (140 ksi). The Domex alloys are advanced high-strength steels that reduce the weight of heavy vehicles, trailers, cranes, and containers. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-603. Producer or source: SSAB Swedish Steel Inc.

RMI 5Al-2.5Sn

Alloy Digest ◽  
1988 ◽  
Vol 37 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Aluminum Content ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Oxidation ◽  
Temperature Performance ◽  
High Aluminum Content ◽  
Alpha Titanium ◽  
High Aluminum

Abstract RMI 5A1-2.5Sn is an alpha titanium alloy. It is not hardenable by heat treatment. The relatively high aluminum content gives the alloy good strength characteristics and resistance to elevated-temperature oxidation (up to 1100 F). RMI 5A1-2.5Sn is readily weldable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-90. Producer or source: RMI Company.

RMI 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (4) ◽  
Keyword(s):  
Yield Strength ◽  
Stainless Steels ◽  
Pure Titanium ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

WELDOX 700

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Structural Steel ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract Weldox 700 is a general structural steel with a minimum yield strength of 700 MPa (102 ksi). This datasheet provides information on composition, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-567. Producer or source: SSAB Weldox.

RUUKKI OPTIM 1100 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

Sign in / Sign up

Export Citation Format

Share Document