Effect of the counterion on the beatability of unbleached kraft pulps

2000 ◽  
Vol 15 (3) ◽  
pp. 189-193 ◽  
Author(s):  
Lars-Åke Hammar ◽  
Marie Bäckström ◽  
Myat Htun
Keyword(s):  
Kraft Pulps

Bleaching ability of pre-hydrolyzed pulps in the context of a biorefinery mill

TAPPI Journal ◽  
2013 ◽  
Vol 12 (11) ◽  
pp. 49-53 ◽  
Author(s):  
CHRISTINE CHIRAT ◽  
LUCIE BOIRON ◽  
DOMINIQUE LACHENAL
Keyword(s):  
Carbon Content ◽  
Acid Hydrolysis ◽  
13C Nmr ◽  
Kraft Lignin ◽  
Kappa Number ◽  
Hydroxyl Groups ◽  
Kraft Pulps ◽  
Quaternary Carbon ◽  
Oxygen Delignification

Autohydrolysis and acid hydrolysis treatments were applied on mixed softwood chips. The cooking ability was studied by varying the alkali and duration of the cook. Pulps with kappa numbers varying from 30 to 70 were obtained. The bleaching ability of these pulps was studied and compared to control kraft pulps. The prehydrolyzed pulps were shown to be more efficiently delignified by oxygen than the control kraft pulps starting from the same kappa number. Furthermore, the final bleaching was also easier for these pulps. It was also shown that extensive oxygen delignification applied on high-kappa pre-hydrolyzed pulps could be a way to improve the overall yield, which is a prerequisite for the development of such biorefinery concepts. Lignin was isolated from the control kraft and the two pre-hydrolyzed kraft pulps and analyzed by 13C NMR. Lignins from pre-hydrolyzed kraft pulps had similar free phenolic groups content to the control kraft lignin, but their aliphatic hydroxyl groups and β-O-4 content were lower than for the control lignin. The quaternary carbon content was the same for all the samples.

Elemental chlorine-free bleaching of North American hardwood kraft pulps: Evaluation of oxidant-reinforced extraction variables on overall bleaching optimization

TAPPI Journal ◽  
2013 ◽  
Vol 12 (10) ◽  
pp. 33-41 ◽  
Author(s):  
BRIAN N. BROGDON
Keyword(s):  
Response Surface ◽  
Chlorine Dioxide ◽  
North American ◽  
Yield Loss ◽  
Alkaline Extraction ◽  
Kraft Pulps ◽  
Pulp Bleaching ◽  
Response Surface Models ◽  
Elemental Chlorine ◽  
Surface Models

This investigation evaluates how higher reaction temperatures or oxidant reinforcement of caustic extraction affects chlorine dioxide consumption during elemental chlorine-free bleaching of North American hardwood pulps. Bleaching data from the published literature were used to develop statistical response surface models for chlorine dioxide delignification and brightening sequences for a variety of hardwood pulps. The effects of higher (EO) temperature and of peroxide reinforcement were estimated from observations reported in the literature. The addition of peroxide to an (EO) stage roughly displaces 0.6 to 1.2 kg chlorine dioxide per kilogram peroxide used in elemental chlorine-free (ECF) bleach sequences. Increasing the (EO) temperature by Δ20°C (e.g., 70°C to 90°C) lowers the overall chlorine dioxide demand by 0.4 to 1.5 kg. Unlike what is observed for ECF softwood bleaching, the presented findings suggest that hot oxidant-reinforced extraction stages result in somewhat higher bleaching costs when compared to milder alkaline extraction stages for hardwoods. The substitution of an (EOP) in place of (EO) resulted in small changes to the overall bleaching cost. The models employed in this study did not take into account pulp bleaching shrinkage (yield loss), to simplify the calculations.

Prebleaching of eucalypt kraft pulp with OP stages: Effect of an acid pretreatment or chelation step

TAPPI Journal ◽  
2012 ◽  
Vol 11 (6) ◽  
pp. 31-38
Author(s):  
TATIANA M. PÓVOAS ◽  
DINA A.G. ANGÉLICO ◽  
ANA P.V. EGAS ◽  
PEDRO E.G. LOUREIRO ◽  
LICÍNIO M. GANDO-FERREIRA ◽  
...  
Keyword(s):  
Eucalyptus Globulus ◽  
Comparative Evaluation ◽  
Kraft Pulp ◽  
Kraft Pulps ◽  
Acid Pretreatment ◽  
High Brightness ◽  
Pulp Viscosity ◽  
Brightness Reversion

We conducted a comparative evaluation of different treatments for the bleaching of eucalypt kraft pulps beginning with OP stages. The treatments tested were (1) an acid chelation stage with DTPA (OQP sequence); (2) a hot acid stage (AOP sequence); and (3) a chelant addition into the alkaline oxygen stage ((OQ)P and A(OQ)P sequences). The latter strategy was also studied for environmental reasons, as it contributes to the closure of the filtrate cycle. The OQP sequence leads to the highest brightness gain and pulp viscosity and the lowest peroxide consumption caused by an efficient metals control. Considering that the low biodegradability of the chelant is a problem, the A(OQ)P sequence is an interesting option because it leads to reduced peroxide consumption (excluding OQP) while still reaching high brightness values and similar brightness reversion to OQP prebleaching, with only a viscosity loss of 160 dm3/kg. Therefore, a hot acid stage could be considered when a separate acid Q stage is absent in a prebleaching sequence of Eucalyptus globulus kraft pulps involving OP stages.

Optimization of elemental chlorine-free bleaching for a softwood kraft pulp • part 2: economic analysis of chemical and steam consumption

TAPPI Journal ◽  
2010 ◽  
Vol 9 (9) ◽  
pp. 47-53 ◽  
Author(s):  
BRIAN N. BROGDON
Keyword(s):  
Chlorine Dioxide ◽  
Previous Investigation ◽  
Kraft Pulp ◽  
Energy Costs ◽  
Alkaline Extraction ◽  
Stage Versus ◽  
Kraft Pulps ◽  
Steam Consumption ◽  
Elemental Chlorine ◽  
Softwood Kraft Pulp

Our previous investigation [1] re-analyzed the data from Basta and co-workers (1992 TAPPI Pulping Conference) to demonstrate how oxidative alkaline extraction can be augmented and how these changes affect chlorine dioxide consumption with elemental chlorine-free (ECF) sequences. The current study manipulates extraction delignification variables to curtail bleaching costs with a conventional U.S. Southern softwood kraft pulp. The economic advantages of ~0.35% to 0.65% H2O2 peroxide reinforcement in a 70°C (EOP)-stage versus 90°C (EO)-stage are predisposed to the brightness targets, to short or long bleach sequences, and to mill energy costs. Minimized bleaching costs are generally realized when a 90°C (EO) is employed in D0(EO)D1 bleaching, whereas a 70°C (EOP) is economically advantageous for D0(EOP)D1E2D2 bleaching. The findings we disclose here help to clarify previous ECF optimization studies of conventional softwood kraft pulps.

scholarly journals Cellulose Nanofibril (CNF) Films and Xylan from Hot Water Extracted Birch Kraft Pulps

2019 ◽  
Vol 9 (16) ◽  
pp. 3436 ◽  
Author(s):  
Marc Borrega ◽  
Hannes Orelma
Keyword(s):  
Food Packaging ◽  
Kraft Pulp ◽  
Barrier Properties ◽  
Hot Water ◽  
Kraft Pulps ◽  
Cellulose Nanofibril ◽  
Vapour Permeability ◽  
Transparent Films ◽  
Cnf Films ◽  
Birch Kraft Pulp

The effects of xylan extraction from birch kraft pulp on the manufacture and properties of cellulose nanofibril (CNF) films were here investigated. Hot water extractions of bleached and unbleached kraft pulps were performed in a flow-through system to remove and recover the xylan. After the extraction, the pulps were oxidized with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) and fibrillated in a high-pressure microfluidizer. Compared to CNF from bleached kraft pulp, the CNF dispersions obtained from water-extracted pulps were less viscous and generally contained a higher amount of microfiber fragments, although smaller in size. In all cases, however, smooth and highly transparent films were produced from the CNF dispersions after the addition of sorbitol as plasticizer. The CNF films made from water-extracted pulps showed a lower tensile strength and ductility, probably due to their lower xylan content, but the stiffness was only reduced by the presence of lignin. Interestingly, the CNF films from water-extracted bleached pulps were less hydrophilic, and their water vapour permeability was reduced up to 25%. Therefore, hot water extraction of bleached birch kraft pulp could be used to produce CNF films with improved barrier properties for food packaging, while obtaining a high-purity xylan stream for other high-value applications.

Deep eutectic solvent delignification: Impact of initial lignin

BioResources ◽  
2017 ◽  
Vol 12 (4) ◽  
pp. 7301-7310
Author(s):  
Veronika Majová ◽  
Silvia Horanová ◽  
Andrea Škulcová ◽  
Jozef Šima ◽  
Michal Jablonský
Keyword(s):  
Lactic Acid ◽  
Oxalic Acid ◽  
Lignin Content ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Deep Eutectic Solvents ◽  
Kappa Number ◽  
Kraft Pulps ◽  
Oxygen Delignification ◽  
Detailed Understanding

This study aimed to resolve the issue of the lack of detailed understanding of the effect of initial lignin content in hardwood kraft pulps on pulp delignification by deep eutectic solvents. The authors used Kappa number of the concerned pulp, intrinsic viscosity, and selectivity and efficiency of delignification as the parameters of the effect. The pulp (50 g oven dry pulp) was treated with four different DESs systems based on choline chloride with lactic acid (1:9), oxalic acid (1:1), malic acid (1:1), and system alanine:lactic acid (1:9); the results were compared to those reached by oxygen delignification. The results showed that the pulp with a higher initial lignin content had a greater fraction of easily removed lignin fragments.

scholarly journals DUAL-POLYELECTROLYTE ADSORPTION OF POLY(ALLYLAMINE HYDROCHLORIDE) AND XYLAN ONTO RECYCLED UNBLEACHED KRAFT PULPS

BioResources ◽  
2012 ◽  
Vol 7 (2) ◽  
Author(s):  
María Verónica Galván ◽  
Paulina Mocchiutti ◽  
Laura María Cornaglia ◽  
Miguel Ángel Zanuttini
Keyword(s):  
Kraft Pulps ◽  
Polyelectrolyte Adsorption ◽  
Allylamine Hydrochloride
Sign in / Sign up

Export Citation Format

Share Document