Precise measurements of specific heat capacity of beryllium in temperature range 260–870 K

2021 ◽  
pp. 29-32
Author(s):  
Tatiana A. Kompan ◽  
Valentin I. Kulagin ◽  
Viktoriya V. Vlasova ◽  
Sergey V. Kondratiev ◽  
Nikolay F. Pukhov
Keyword(s):  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Metrological Support ◽  
Thermophysical Properties ◽  
Repeated Heating ◽  
Temperature Range ◽  
Upper Limit ◽  
Range Of Values ◽  
Over Time

The possibility of using beryllium as a means of storing and transferring a unit of specific heat capacity and extending the range of values of heat capacity measures from 1654 to 2900 J/(kg·K) towards the upper limit is estimated. The temperature dependence of the specific heat capacity of beryllium samples of known composition in the temperature range of 260–870 K has been determined. The reproducibility of the thermophysical properties of beryllium over time and under repeated heating in the specified temperature range is analyzed. The results obtained are relevant for the field of metrological support in the field of measurements of thermophysical quantities.

Experimental Study on the Specific Heat Capacity Measurement of Water-Based Al2O3-Cu Hybrid Nanofluid by using Differential Thermal Analysis Method

2019 ◽  
Vol 15 ◽  
Author(s):  
Andaç Batur Çolak ◽  
Oğuzhan Yıldız ◽  
Mustafa Bayrak ◽  
Ali Celen ◽  
Ahmet Selim Dalkılıç ◽  
...  
Keyword(s):  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Thermophysical Properties ◽  
Volume Concentration ◽  
Pure Water ◽  
Heat Capacity Measurement ◽  
Experimental Results ◽  
Hybrid Nanofluid ◽  
Capacity Measurement

Background: Researchers working in the field of nanofluid have done many studies on the thermophysical properties of nanofluids. Among these studies, the number of studies on specific heat are rather limited. In the study of the heat transfer performance of nanofluids, it is necessary to increase the number of specific heat studies, whose subject is one of the important thermophysical properties. Objective: The authors aimed to measure the specific heat values of Al2O3/water, Cu/water nanofluids and Al2O3-Cu/water hybrid nanofluids using the DTA method, and compare the results with those frequently used in the literature. In addition, this study focuses on the effect of temperature and volume concentration on specific heat. Method: The two-step method was used in the preparation of nanofluids. The pure water selected as the base fluid was mixed with the Al2O3 and Cu nanoparticles and Arabic Gum as the surfactant, firstly mixed in the magnetic stirrer for half an hour. It was then homogenized for 6 hours in the ultrasonic homogenizer. Results: After the experiments, the specific heat of nanofluids and hybrid nanofluid were compared and the temperature and volume concentration of specific heat were investigated. Then, the experimental results obtained for all three fluids were compared with the two frequently used correlations in the literature. Conclusion: Specific heat capacity increased with increasing temperature, and decreased with increasing volume concentration for three tested nanofluids. Cu/water has the lowest specific heat capacity among all tested fluids. Experimental specific heat capacity measurement results are compared by using the models developed by Pak and Cho and Xuan and Roetzel. According to experimental results, these correlations can predict experimental results within the range of ±1%.

Specific Heat Capacity Estimations for Biologically and Medicinally Important Compounds: Lidocaine Hydrochloride, Clove Oil and Piperine using DSC Technique

2020 ◽  
Vol 10 ◽  
Author(s):  
Gaurav Gupta ◽  
Vasim Shaikh ◽  
Sachin Kalas ◽  
Kesharsingh Patil
Keyword(s):  
Heat Capacity ◽  
Ionic Liquid ◽  
Heat Flow ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Chemical Potential ◽  
Lidocaine Hydrochloride ◽  
Clove Oil ◽  
Temperature Range ◽  
Thermal Gravimetry

Aims: To study the specific heat capacity for biologically and medicinally important compounds, namely, lidocaine hydrochloride, clove oil and brta-Piperine using DSC technique. Background: One of the main problems in the science of medicine is the application of drug molecules with limited solubility in water and in biofluids. Solubility is related to chemical potential of the solutes involved which imparts free energy avenues, a necessary requirement for equilibrium processes. The convincing solutions for solving this issue are the utilization of ionic liquids as drug. Lidocaine is the most widely utilized intraoral injected dental anesthetic prior to performing painful medical procedures. Besides that, lidocaine hydrochloride is a salt which is having melting point 76 0C (349 K) and behaves as ionic liquid after melting. Clove oil and β-piperine are very well-known naturally occurring medicinal compounds having broad spectrum of applications. Objective: To study the thermal gravimetry analysis behaviour for lidocaine hydrochloride, clove oil and β-piperine. To compute specific heat capacity at constant pressure, as a function of temperature for the studied systems. Method: In the present communication, the studies of thermal gravimetry analysis (TGA) and differential scanning calorimetry (DSC) for these compounds are described. The data of heat flow have been utilized to obtain specific heat capacity (Cp) values for lidocaine hydrochloride, clove oil and β-piperine over a temperature range in between 75 0C (348 K) and 155 0C (428 K) based upon the methodology we have developed. Result: The data of heat flow have been utilized to obtain specific heat capacity (Cp) values for lidocaine hydrochloride, clove oil and β-piperine over a temperature range in between 75 0C (348 K) and 155 0C (428 K) based upon the methodology we have developed. Conclusion: LC•HCl behaves as an ionic liquid between 76 and 230 0C (349 and 503 K). Clove oil is having lower specific heat capacity values and is similar to other organic aromatic compounds while piperine exhibits comparative high specific heat capacity values indicating possibilities of intramolecular hydrogen bonding which is generally not affected by temperature.

Estimation of the heat capacity of CdTe semiconductor

2016 ◽  
Vol 30 (04) ◽  
pp. 1650026 ◽  
Author(s):  
Hüseyin Koç ◽  
Erhan Eser
Keyword(s):  
Heat Capacity ◽  
Thermodynamic Properties ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Binomial Coefficient ◽  
Debye Model ◽  
The Other ◽  
Temperature Range ◽  
Theoretical Results ◽  
Good Agreement

The aim of this paper is to provide a simple and reliable analytical expression for the thermodynamic properties calculated in terms of the Debye model using the binomial coefficient, and examine specific heat capacity of CdTe in the 300–1400 K temperature range. The obtained results have been compared with the corresponding experimental and theoretical results. The calculated results are in good agreement with the other results over the entire temperature range.

Thermodynamic Properties of Ionized Gases at High Temperatures

2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Kian Eisazadeh-Far ◽  
Hameed Metghalchi ◽  
James C. Keck
Keyword(s):  
Heat Capacity ◽  
Thermodynamic Properties ◽  
Specific Heat ◽  
High Temperatures ◽  
Mole Fraction ◽  
Specific Heat Capacity ◽  
Local Equilibrium ◽  
Equilibrium Conditions ◽  
New Model ◽  
Temperature Range

Thermodynamic properties of ionized gases at high temperatures have been calculated by a new model based on local equilibrium conditions. Calculations have been done for nitrogen, oxygen, air, argon, and helium. The temperature range is 300–100,000 K. Thermodynamic properties include specific heat capacity, density, mole fraction of particles, and enthalpy. The model has been developed using statistical thermodynamics methods. Results have been compared with other researchers and the agreement is good.

INVESTIGATION OF THE ENTROPY AND SPECIFIC HEAT CAPACITY OF GaN USING INCOMPLETE GAMMA FUNCTIONS

2008 ◽  
Vol 22 (30) ◽  
pp. 5349-5355 ◽  
Author(s):  
SAVAŞ SÖNMEZOǦLU
Keyword(s):  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Experimental Results ◽  
Analytical Relation ◽  
Gamma Functions ◽  
Temperature Range ◽  
Incomplete Gamma Functions ◽  
Theoretical Results ◽  
Good Agreement

The aim of this paper is to provide validity and reliable analytical relation for the thermodynamic functions calculated in terms of the Debye temperature using incomplete gamma functions, and examines the entropy and specific heat capacity of hexagonal single crystals of GaN in the 0–1800 K temperature range. The obtained results have been compared with the corresponding experimental and theoretical results. Our results are in excellent agreement with the theoretical results over the entire temperature range. It has also shown that at low temperature, our results are in very good agreement with the experimental results, however, at high temperature, our results are lower than other experimental results.

Study and Analysis of Metal Coolant Thermophysical Properties

2012 ◽  
Vol 184-185 ◽  
pp. 1226-1231
Author(s):  
Meng Ying Liu ◽  
Tao Zhou ◽  
Wen Zhong Zou ◽  
Zi Wei Su
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Thermophysical Properties ◽  
Kinematic Viscosity ◽  
Fusion Reactor ◽  
Small Difference ◽  
Heat Transfer Capacity ◽  
Metal Coolant

The article chooses Na, LiPb and LBE three kinds of metal coolant, and makes a comparative analysis of the thermophysical properties of Na, LiPb and LBE when they are at liquid state. The results show that Na has the lowest density and the largest thermal conductivity and specific heat capacity. There is a small difference between LBE and LiPb in terms of density, thermal conductivity and specific heat capacity. LiPb has the largest kinematic viscosity. The thermal conductivity of Na decreases as temperature rises, which is opposite of LBE and LiPb. The kinematic viscosity of LiPb increases as temperature rises. Considering thermal conductivity and specific heat capacity, LBE and LiPb are not the best coolant. However, their high densities can economize equipments and materials at the same time. When it flows, LiPb’s heat transfer capacity gets larger as temperature rises, this character can not be ignored in fusion reactor.

Sign in / Sign up

Export Citation Format

Share Document