scholarly journals Tool wear rate optimization in PMEDM using titanium powder by Taguchi method for die steels

2016 ◽  
Vol 19 (2) ◽  
pp. 88-97
Author(s):  
Long Tien Banh ◽  
Phan Huu Nguyen ◽  
Cuong Ngo
Keyword(s):  
Wear Rate ◽  
Tool Wear ◽  
Taguchi Method ◽  
Electrical Discharge ◽  
Machining Process ◽  
Machining Parameters ◽  
Tool Wear Rate ◽  
Optimal Value ◽  
Pulse On Time ◽  
Pulse Off Time

Powder mixed electrical discharge maching (PMEDM) is a complex machining process which is controlled by a number of machining parameters. Each machining parameter has its own influence on performance of the process. For achieving the best performance of the electrical discharge machining (EDM) process, it is crucial to carry out parametric design responses such as Metal Removal Rate (MRR), Tool Wear Rate (TWR) and Surface Roughness(SR). The objective of this paper is to optimization of input parameters for the TWR in PMEDM using powder titanium are presented. The Taguchi method was applied to the processing parameters to investigate the following: workpiece material, tool material, polarity, pulse-on time, current, pulse-off time, and powder concentration. The analysis used the Taguchi method and given the optimal value for TWR with respective parameters. Electrode material affected the strongest factor, the Taguchi coefficient, S/N of TWR. And the optimal value of TWR was 3.092 mm3/min. Results from optimization calculations and experimentation have demonstrated high accuracy and efficiency.

Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM Using Copper Tungsten Electrode: A Statistical Approach

2010 ◽  
Vol 152-153 ◽  
pp. 1595-1602 ◽  
Author(s):  
M.M. Rahman ◽  
Md. Ashikur Rahman Khan ◽  
K. Kadirgama ◽  
M.M. Noor ◽  
Rosli A. Bakar
Keyword(s):  
Wear Rate ◽  
Tool Wear ◽  
Machining Process ◽  
Electrode Wear ◽  
Tool Wear Rate ◽  
Peak Current ◽  
Long Pulse ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Off Time

Electrical discharge machining (EDM) is relatively modern machining process having distinct advantages over other machining processes and able to machine Ti-alloys effectively. This paper attempts to investigate the effects of peak ampere, pulse on time and pulse off time on tool wear rate (TWR) of titanium alloy Ti-6Al-4V in EDM utilizing copper tungsten as an electrode and positive polarity of the electrode. A mathematical model for electrode wear rate is developed in this paper. Design of experiments method and response surface methodology techniques are implemented. The validity test of the fit and adequacy of the proposed models has been carried out through analysis of variance. It can be seen that as the peak current increases the TWR decreases till certain ampere and then increases. The excellent surface finish is investigated in this study at short pulse on time and in contrast the long pulse duration causes the lowest TWR. Long pulse off time provides minimum TWR and the impact of pulse interval on TWR depends on peak current. The result leads to wear rate of electrode and economical industrial machining by optimizing the input parameters.

Research on Tool Wear Rate of Powder Mixed near Dry Electrical Discharge Machining

2013 ◽  
Vol 652-654 ◽  
pp. 2222-2227 ◽  
Author(s):  
Xue Bai ◽  
Qin He Zhang ◽  
Ting Yi Yang ◽  
Jian Hua Zhang ◽  
Jing Tan
Keyword(s):  
Wear Rate ◽  
Tool Wear ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Tool Wear Rate ◽  
Powder Concentration ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Off Time ◽  
Dry Electrical Discharge Machining

Powder mixed near dry electrical discharge machining (PMND-EDM) is one of the novel EDM processes, which uses gas-liquid-powder mixture as the dielectric medium. The tool wear rate (TWR) in PMND-EDM is researched based on single factor experiments. Effects of process parameters, such as peak current, pulse on time, pulse off time, flow rate, powder concentration, tool rotational speed and air pressure, on TWR are found out. TWR increases with the increase of peak current. TWR decreases with increasing of pulse on time. TWR increases firstly and then decreases while pulse off time increases. Increase of flow rate results in the increase of TWR. With the increase of powder concentration, TWR increases firstly and then decreases. Existence of tool rotation facilities decrease of TWR, however, further increase of rotational speed leads to increase of TWR. Increase of air pressure leads to lower TWR.

scholarly journals Tool Wear Rate on Inconel 718 using W-Powder Mixed Electric Discharge Drilling

2020 ◽  
Vol 9 (5) ◽  
pp. 1431-1435
Keyword(s):  
Wear Rate ◽  
Tool Wear ◽  
Inconel 718 ◽  
Electrical Discharge ◽  
Removal Rate ◽  
Research Work ◽  
Machining Parameters ◽  
Tool Wear Rate ◽  
Electrical Discharge Drilling ◽  
Pulse Off Time

Electrical Discharge Drilling (EDD) is an unconventional manufacturing process with large industrial performances. Addition of powder particles in dielectric changes some process variables and machines hard and hard to cut materials with greater surface finish high tolerance and accuracy to accomplish a superior material removal rate with a reduced Tool Wear Rate (TWR). This research work explores the performance of TWR on Tungsten Powder Mixed Electrical Discharge Drilling (W-PMEDD) on Inconel 718 super alloy. The input machining parameters of Peak Current (Ip ) Pulse on (Ton) and Pulse off time (Toff) and the output measure of TWR were examined by Response Surface Method (RSM). Analysis of Variance was used to evaluate the effect of the machining parameters and it is concluded that Ip, Ton and Toff are the most significant parameters while machining of W-PMEDD on Inconel 718.

Optimization of Tool Wear Rate during Electro Discharge Machining of NiTi Alloys Using Taguchi Method

2015 ◽  
Vol 787 ◽  
pp. 260-264
Author(s):  
Vijaykumar S. Jatti ◽  
T.P. Singh
Keyword(s):  
Electrical Conductivity ◽  
Wear Rate ◽  
Tool Wear ◽  
Process Parameters ◽  
Machining Process ◽  
Tool Wear Rate ◽  
Niti Alloys ◽  
Electro Discharge Machining ◽  
Pulse On Time ◽  
Pulse Off Time

NiTi alloys are advance materials which possess superior properties such as pseudoelasticity, shape memory effect, high wear resistance, high corrosion resistance and high strength. NiTi alloys causes serious tool wear, hardening of the machined surface and poor surface finish. Electro discharge machining (EDM) is an unconventional machining process which demonstrates high capability to machine NiTi alloys. Present work emphasis on investigating the effect of EDM process parameters on the tool wear rate. Gap current, pulse on time and pulse off time were considered at three levels as input process parameters along with electrical conductivity of workpiece and tool electrode at two levels. Taguchi L36 (22 x 33) mixed orthogonal array was utilized to design the experimental plan. Based on the statistical analysis at 95% confidence level it was found that tool electrical conductivity, gap current and pulse on time are the most significant factors that influence the tool wear rate. At optimal setting of parameters the predicted value of tool wear rate obtained was 0.00811 mm3/min.

scholarly journals Study of the effects of process parameters on tool wear rate in powder mixed electrical discharge machining by Taguchi method

2018 ◽  
Vol 20 (K7) ◽  
pp. 55-60
Author(s):  
Phan - Nguyen Huu
Keyword(s):  
Wear Rate ◽  
Tool Wear ◽  
Taguchi Method ◽  
Process Parameters ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Tool Wear Rate ◽  
Machined Surface ◽  
Powder Concentration ◽  
Pulse On Time

There have been various attempts to improve the surface finish after Electrical Discharge Machining (EDM) by polishing and other means. But if it is possible to improve the surface during machining it will shorten the machining time. From this viewpoint powder mixed EDM (PMEDM) is one of these processes. PMEDM not only imparts fine machined surface finish but also modifies the machined surface. However, it is necessary to understand the mechanism of PMEDM process. In this study, influence of process parameters to tool wear rate (TWR) of PMEDM using titanium (Ti) powder is presented. The objective of the study is to evaluate the main effects of workpiece material, tool material, polarity, pulse-on time, intensity of discharge, pulse-off time, and powder concentration on the TWR in PMEDM. They carried out the investigation based on the Taguchi method involving seven control factors with three levels for an orthogonal array L27 (1313).The results indicated that electrode material, electrode polarity, pulse on time, current and powder concentration were the most significant parameters that influenced the TWR. This result will be the basis for selecting the factors in further optimization studies.  

scholarly journals Study of wire-electrical discharge machining parameters of titanium alloy by using taguchi method

2018 ◽  
Vol 7 (2.8) ◽  
pp. 10
Author(s):  
A VS Ram Prasad ◽  
Koona Ramji ◽  
B Raghu Kumar
Keyword(s):  
Surface Roughness ◽  
Taguchi Method ◽  
Process Parameters ◽  
Optimization Technique ◽  
Machining Process ◽  
Machining Parameters ◽  
Wire Edm ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Edm Process

Machining of Titanium alloys is difficult due to their chemical and physical properties namely excellent strength, chemical reactivity and low thermal conductivity. Traditional machining of such materials leads to formation of continuous chips and tool bits are subjected to chatter which leads to formation of poor surface on machined surface. In this study, Wire-EDM one of the most popular unconventional machining process which was used to machine such difficult-to-cut materials. Effect of Wire-EDM process parameters namely peak current, pulse-on- time, pulse-off-time, servo voltage on MRRand SR was investigated by Taguchi method. 0.25 mm brass wire was used in this process as electrode material. A surface roughness tester (Surftest 301) was used to measure surface roughness value of the machined work surface. A multi-response optimization technique was then utilized to optimize Wire-EDM process parameters for achieving maximum MRR and minimum SR simultaneously.

Fabrication and experimental investigation of magnetic field assisted powder mixed electrical discharge machining on machining of aluminum 6061 alloy

2019 ◽  
Vol 233 (12) ◽  
pp. 2283-2291 ◽  
Author(s):  
Arun Kumar Rouniyar ◽  
Pragya Shandilya
Keyword(s):  
Magnetic Field ◽  
Wear Rate ◽  
Tool Wear ◽  
Material Removal Rate ◽  
Electrical Discharge ◽  
Material Removal ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Tool Wear Rate ◽  
Pulse On Time

Magnetic field assisted powder mixed electrical discharge machining is a hybrid machining process with suitable modification in electrical discharge machining combining the use of magnetic field and fine powder in the dielectric fluid. Aluminum 6061 alloy has found highly significance for the advanced industries like automotive, aerospace, electrical, marine, food processing and chemical due to good corrosion resistance, high strength-to-weight ratio, ease of weldability. In this present work, magnetic field assisted powder mixed electrical discharge machining setup was fabricated and experiments were performed using one factor at a time approach for aluminum 6061 alloy. The individual effect of machining parameters namely, peak current, pulse on time, pulse off time, powder concentration and magnetic field on material removal rate and tool wear rate was investigated. The effect of peak current was found to be dominant on material removal rate and tool wear rate followed by pulse on time, powder concentration and magnetic field. Increase in material removal rate and tool wear rate was observed with increase in peak current, pulse on time and a decrease in pulse off time, whereas, for material removal rate increases and tool wear rate decreases up to the certain value and follow the reverse trend with an increase in powder concentration. Material removal rate was increased and tool wear rate was decreased with increase in magnetic field.

scholarly journals Findings of performance evaluation of EDM for different materials of electrodes and work pieces- a review

2018 ◽  
Vol 7 (4.5) ◽  
pp. 542
Author(s):  
Harshalkumar R. Mundane ◽  
Dr. A. V. Kale ◽  
Dr. J. P. Giri
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Performance Measure ◽  
Machining Process ◽  
Machining Parameters ◽  
Spark Erosion ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Off Time ◽  
Time Pulse

EDM (Spark erosion) is non-conventional machining process which uses as removing unwanted material by electrical spark erosion. EDM Machining parameters affecting to the performance and the industries goal is to produce high quality of product with less time consuming and cost. To achieve these goals, optimizing the machining parameters such as pulse on time, pulse off time, cutting speed, depth of cut, duty cycle, arc gap, voltage etc. The performance measure of EDM is calculated on the basis of Material Remove Rate(MRR), Tool Wear Rate(TWR), and Surface Roughness(SR).The main objective of present work is to investigate of the influence of input EDM (Electro Discharge Machining) parameters on machining characteristics like surface roughness and the effects of various EDM process parameters such as pulse on time, pulse off time, servo voltage, peak current, dielectric flow rate, on different process response parameters such as material removal rate (MRR), surface roughness (Ra), Kerf (width of Cut), tool wear ratio(TWR)and surface integrity factors. In this paper few selected research paper related to Die-sinker EDM with effect of MRR, TWR, surface roughness (SR) and work piece material have been discussed.   

scholarly journals Machinability Of Shape Memory Alloy Using Electro Spark Erosion Process 

2021 ◽  
Author(s):  
Adam Khan M ◽  
Winowlin Jappes J T ◽  
Samuel Ratna Kumar P S ◽  
Mashinini P M
Keyword(s):  
Surface Roughness ◽  
Wear Rate ◽  
Tool Wear ◽  
Shape Memory ◽  
Applied Voltage ◽  
Material Removal ◽  
Machining Process ◽  
Tool Wear Rate ◽  
Pulse On Time ◽  
The Impact

Abstract In this research work, the nickel – titanium based shape memory alloys are machined using electro spark machining process. The influence of the input process for electro spark production is studied in detail. From the analysis, the tool wear rate (TWR), surface roughness, and material removal rate (MRR) are investigated. The intensity of the electro spark produced at minimum pulse on-time 10 µs and maximum applied voltage (60 V). Variation in MRR is wide for a minimum pulse on time with low applied voltage. The surface roughness of the machined surface is also directly influenced by the in – efficient spark produced. The copper electrode with increase pulse duration the alloy behaves like a strong conductor to transmit electrical energy between the electrode and work material. The contribution of pulse on-time is maximum for material removal and tool wear rate. However, the surface finish depends on the applied voltage of the process designed. The impact on machined surfaces, micro-cracks, electro-discharge carter's, and recast material due to electrical discharge were assessed using a scanning electron microscope and energy-dispersive X-ray spectroscopy (EDX) analysis. The experimental value shows that material removal depends on the pulse on process timings and applied voltage. Thus, by using mathematical analysis the influence of (electric discharge machining) EDM process parameters was evaluated.

scholarly journals Comparative Study on EDM of Ti-6Al-4V Using Circular and Convex Shaped Electrodes

2018 ◽  
Vol 7 (3.34) ◽  
pp. 256
Author(s):  
S Rajamanickam ◽  
R Palani ◽  
V Sathyamoorthy ◽  
Muppala Jagadeesh Varma ◽  
Shaik Shaik Mahammad Althaf ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Industrial Applications ◽  
Copper Electrode ◽  
Machining Process ◽  
Project Work ◽  
Machining Parameters ◽  
Pulse On Time ◽  
Pulse Off Time

As on today, Electrical Discharge Machining (EDM) is world famous unconventional machining process for electrically conductive materials. In this project work, Ti-6Al-4V is performed in electrical discharge machining using differently shaped (circular and convex) copper electrode. The machining parameters considered are the pulse on- time, pulse off-time, voltage and current to investigate machining characteristics like material removal rate and tool wear rate. Taguchi method is applied to frame experimental design. Ti-6Al-4V finds wide usage in industrial applications such as marine, aerospace, bio-medical and so on. 

Sign in / Sign up

Export Citation Format

Share Document