scholarly journals Assesment Assessment of X-Ray converter for electron beam radiation processing facility

2020 ◽  
Vol 4 (4) ◽  
pp. First
Author(s):  
Nguyen Anh Tuan ◽  
Chau Van Tao
Keyword(s):  
Electron Beam ◽  
Cooling Water ◽  
High Energy ◽  
Radiation Processing ◽  
Beam Radiation ◽  
X Ray ◽  
High Area ◽  
Processing Facility ◽  
Circulating Cooling Water ◽  
Sludge Waste

Recently, a high energy electron beam from accelerators studied on the application for foods and medical devices irradiation, therapy, denature material, discolored semi-precious stones and degradation of environment pollution (Gas, Water, and Sludge Waste). The advantages of electron beam from accelerators are high power density and easy focusing on the target, but electron beam is only useful to irradiate on the surface of the irradiation product because their penetration is short. In order to irradiate high area density products, the X-ray converter is used to generate photon (bremsstrahlung effect). In this article, converting efficiency and direction of X-ray emission is measured by film dosimeter and simulated by MCNP-4c2 code. Measurement and simulation results show that converting efficiency depends on materials of the targets and electron energy, the converting efficiency of Ti – H2O – Pb converter at electron beam energy 5.0 MeV, 7.5 MeV, and 10.0 MeV are 5.57 %, 7.12 %, and 13.54 %. Ti – H2O – Pb converter is made up of 3 layers of Ti wrap material with the function of bearing, heat resistance, circulating cooling water between Ti and Pb layers to cooling, so it is applied for the accelerator.

Contribution of Cerenkov radiation in high-energy x-ray and electron beam film dosimetry using water-substitute phantoms

2003 ◽  
Vol 48 (6) ◽  
pp. N105-N109 ◽  
Author(s):  
Tatsuya Fujisaki ◽  
Hidetoshi Saitoh ◽  
Takeshi Hiraoka ◽  
Akio Kuwabara ◽  
Shinji Abe ◽  
...  
Keyword(s):  
Electron Beam ◽  
High Energy ◽  
Cerenkov Radiation ◽  
Film Dosimetry ◽  
X Ray

scholarly journals Ionizing Radiation for Preparation and Functionalization of Membranes and Their Biomedical and Environmental Applications

Membranes ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 163 ◽  
Author(s):  
Casimiro ◽  
Ferreira ◽  
Leal ◽  
Pereira ◽  
Monteiro
Keyword(s):  
Ionizing Radiation ◽  
Low Cost ◽  
High Energy ◽  
Environmental Applications ◽  
Radiation Processing ◽  
Processing Technologies ◽  
High Energy Radiation ◽  
X Ray ◽  
Radiation Sources ◽  
Wide Range

The use of ionizing radiation processing technologies has proven to be one of the most versatile ways to prepare a wide range of membranes with specific tailored functionalities, thus enabling them to be used in a variety of industrial, environmental, and biological applications. The general principle of this clean and environmental friendly technique is the use of various types of commercially available high-energy radiation sources, like 60Co, X-ray, and electron beam to initiate energy-controlled processes of free-radical polymerization or copolymerization, leading to the production of functionalized, flexible, structured membranes or to the incorporation of functional groups within a matrix composed by a low-cost polymer film. The present manuscript describes the state of the art of using ionizing radiation for the preparation and functionalization of polymer-based membranes for biomedical and environmental applications.

Surface Structure of Sulfur Coated GaAs

1989 ◽  
Vol 163 ◽  
Author(s):  
Yoshihisa Fujisaki ◽  
Shigeo Goto
Keyword(s):  
Electron Beam ◽  
Surface Structure ◽  
Chemical Bond ◽  
Photoelectron Spectroscopy ◽  
Strong Dependence ◽  
High Energy ◽  
Chemical Bonds ◽  
High Energy Electron ◽  
X Ray ◽  
Beam Diffraction

AbstractSurface structure of (NH4)2S treated GaAs. is investigated using PL (PhotoLuminescence), XPS (X-ray Photoelectron Spectroscopy) and RHEED (Reflection of High Energy Electron beam Diffraction). The data taken with these techniques show the strong dependence upon the crystal orientations coming from the stabilities of chemical bonds of Ga-S and As-S on GaAs crystals. The greater enhancement of PL intensity, the clearer RHEED patterns and the smaller amount of oxides on (111)A than (111)B implies the realization of a more stable structure composed mainly of the Ga-S chemical bond.

Effects of high-energy-pulse-electron beam radiation on biomacromolecules

2008 ◽  
Vol 51 (1) ◽  
pp. 86-91 ◽  
Author(s):  
Hong Zhu ◽  
JingZao Xu ◽  
ShiQiang Li ◽  
XiaoYu Sun ◽  
SiDe Yao ◽  
...  
Keyword(s):  
Electron Beam ◽  
High Energy ◽  
Pulse Electron Beam ◽  
Pulse Electron ◽  
Beam Radiation ◽  
Electron Beam Radiation ◽  
Energy Pulse

X-ray spectroscopy and spectropolarimetry of high energy density plasma complemented by LLNL electron beam ion trap experiments

2003 ◽  
Vol 74 (3) ◽  
pp. 1947-1950 ◽  
Author(s):  
A. S. Shlyaptseva ◽  
D. A. Fedin ◽  
S. M. Hamasha ◽  
S. B. Hansen ◽  
C. Harris ◽  
...  
Keyword(s):  
Electron Beam ◽  
Energy Density ◽  
Ion Trap ◽  
High Energy ◽  
High Energy Density ◽  
X Ray ◽  
Electron Beam Ion Trap ◽  
Density Plasma

PRODUCTION OF FEMTOSECOND PULSES AND MICRON BEAM SPOTS FOR HIGH BRIGHTNESS ELECTRON BEAM APPLICATIONS

2007 ◽  
Vol 22 (22) ◽  
pp. 3726-3735
Author(s):  
S. G. ANDERSON ◽  
D. J. GIBSON ◽  
F. V. HARTEMANN ◽  
J. S. JACOB ◽  
A. M. TREMAINE ◽  
...  
Keyword(s):  
Electron Beam ◽  
Electron Beams ◽  
Beam Radiation ◽  
High Brightness ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Inverse Compton ◽  
Strong Focusing ◽  
Moderate Energy ◽  
Low Emittance

Current and future applications of high brightness electron beams, which include advanced accelerators and beam-radiation interactions require both transverse and longitudinal beam sizes on the order of tens of microns. Ultra-high density beams may be produced at moderate energy (50 MeV) by compression and subsequent strong focusing of low emittance, photoinjector sources. We describe the implementation of this method used at the PLEIADES inverse-Compton scattering (ICS) x-ray source at LLNL in which the photoinjector-generated beam has been compressed to 300 fsec rms duration using the velocity bunching technique and focused to 20 μm rms size using an extremely high gradient, permanent magnet quadrupole focusing system.

scholarly journals The importance of EBIT data for Z-pinch plasma diagnostics

2008 ◽  
Vol 86 (1) ◽  
pp. 267-276 ◽  
Author(s):  
A S Safronova ◽  
V L Kantsyrev ◽  
P Neill ◽  
U I Safronova ◽  
D A Fedin ◽  
...  
Keyword(s):  
Electron Beam ◽  
Lawrence Livermore National Laboratory ◽  
National Laboratory ◽  
Theoretical Models ◽  
High Energy ◽  
High Energy Density ◽  
Strong Electron ◽  
Model Calculations ◽  
X Ray ◽  
Z Pinch

The results from the last six years of X-ray spectroscopy and spectropolarimetry of high-energy density Z-pinch plasmas complemented by experiments with the electron beam ion trap (EBIT) at the Lawrence Livermore National Laboratory (LLNL) are presented. The two topics discussed are the development of M-shell X-ray W spectroscopic diagnostics and K-shell Ti spectropolarimetry of Z-pinch plasmas. The main focus is on radiation from a specific load configuration called an “X-pinch”. In this work the study of X-pinches with tungsten wires combined with wires from other, lower Z materials is reported. Utilizing data produced with the LLNL EBIT at different energies of the electron beam the theoretical prediction of line positions and intensity of M-shell W spectra were tested and calibrated. Polarization-sensitive X-pinch experiments at the University of Nevada, Reno (UNR) provide experimental evidence for the existence of strong electron beams in Ti and Mo X-pinch plasmas and motivate the development of X-ray spectropolarimetry of Z-pinch plasmas. This diagnostic is based on the measurement of spectra recorded simultaneously by two spectrometers with different sensitivity to the linear polarization of the observed lines and compared with theoretical models of polarization-dependent spectra. Polarization-dependent K-shell spectra from Ti X-pinches are presented and compared with model calculations and with spectra generated by a quasi-Maxwellian electron beam at the LLNL EBIT-II electron beam ion trap.PACS Nos.: 32.30.Rj, 52.58.Lq, 52.70.La

scholarly journals Phase Transformation and Microstructure Characterization of Ceramic Porcelain with Different Ratio of Treated Fgd Sludge/Feldspar

2021 ◽  
Vol 2129 (1) ◽  
pp. 012092
Author(s):  
Suffi Irni Alias ◽  
Banjuraizah Johar ◽  
Syed Nuzul Fadzli Adam ◽  
Mustaffa Ali Azhar Taib ◽  
Fatin Fatini Othman ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Xrd Analysis ◽  
High Energy ◽  
Hydraulic Press ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Sludge Waste ◽  
Main Component

Abstract The porcelain formulation containing percentages of treated FGD sludge waste from 5% up to 15% in replacement of feldspar were prepared. The porcelain mixture formulation were mixed by high energy planatery mill at speed 300 rpm for 1 hours. The powder were compacted by using hydraulic press and sintered at temperature 1200 °C for 3 hours. The sintered samples were characterized using X-ray fluorescene (XRF), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) and Thermogravimetry/Differential scanning calorimetry (TGA/DCS). The primary effect concerning the addition of treated FGD sludge was the change of intensity composition (gypsum and anhydrate) in porcelain formulation. The XRD analysis has shown that the main component in sludge waste were gypsum and anhydrate.

Sign in / Sign up

Export Citation Format

Share Document