scholarly journals Phase Transformation and Microstructure Characterization of Ceramic Porcelain with Different Ratio of Treated Fgd Sludge/Feldspar

2021 ◽  
Vol 2129 (1) ◽  
pp. 012092
Author(s):  
Suffi Irni Alias ◽  
Banjuraizah Johar ◽  
Syed Nuzul Fadzli Adam ◽  
Mustaffa Ali Azhar Taib ◽  
Fatin Fatini Othman ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Xrd Analysis ◽  
High Energy ◽  
Hydraulic Press ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Sludge Waste ◽  
Main Component

Abstract The porcelain formulation containing percentages of treated FGD sludge waste from 5% up to 15% in replacement of feldspar were prepared. The porcelain mixture formulation were mixed by high energy planatery mill at speed 300 rpm for 1 hours. The powder were compacted by using hydraulic press and sintered at temperature 1200 °C for 3 hours. The sintered samples were characterized using X-ray fluorescene (XRF), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) and Thermogravimetry/Differential scanning calorimetry (TGA/DCS). The primary effect concerning the addition of treated FGD sludge was the change of intensity composition (gypsum and anhydrate) in porcelain formulation. The XRD analysis has shown that the main component in sludge waste were gypsum and anhydrate.

Characterization of New Cocrystals by Raman Spectroscopy, Powder X-ray Diffraction, Differential Scanning Calorimetry, and Transmission Raman Spectroscopy

2010 ◽  
Vol 10 (5) ◽  
pp. 2360-2371 ◽  
Author(s):  
M. A. Elbagerma ◽  
H. G. M. Edwards ◽  
T. Munshi ◽  
M. D. Hargreaves ◽  
Pavel Matousek ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Raman Spectroscopy ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Raman

Preparation and characterization of 1,2,4,5-benzenetetra carboxylic-chitosan

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Nurhidayatullaili Muhd Julkapli ◽  
Zulkifli Ahmad ◽  
Hazizan Md Akil
Keyword(s):  
Xrd Analysis ◽  
Absorption Capacity ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
H Nmr ◽  
Crystalline Nature ◽  
The Fourier Transform

AbstractChemically cross-linked chitosan (MC) containing 1,2,4,5- benzenetetracarboxylic acid (BCA) as the cross-linking agent was prepared to improve the metal ions absorption capacity of native chitosan (NC) and limit its biodegradability. The Fourier transform infra-red (FTIR) and proton neutron magnetic resonance (1H NMR) results showed that BCA was successfully linked onto N-position of NC. The crystalline nature of NC was reduced significantly after cross-linking as examined by X-ray diffraction (XRD) analysis. Therefore, the glass transition temperature (Tg) of MC was higher than NC as reported by differential scanning calorimetry (DSC). Moreover, thermogravimetric (TGA) analysis showed that, MC had better thermal stability than NC. Morphology changes on the surface of NC and MC were characterized by field emission scanning electron microscopy (FESEM) and showed that MC had more porous surface than NC. In pH medium of 3 to 6, MC had excellent Cu (II) ions absorption capacity with a maximum 16 % higher than NC.

Unprecedented transformation of [I−·I3−] to [I42−] polyiodides in the solid state: structures, phase transitions and characterization of dipyrazolium iodide triiodide

2015 ◽  
Vol 44 (42) ◽  
pp. 18447-18458 ◽  
Author(s):  
M. Węcławik ◽  
P. Szklarz ◽  
W. Medycki ◽  
R. Janicki ◽  
A. Piecha-Bisiorek ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Transitions ◽  
Solid State ◽  
Dielectric Measurements ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Solid State Structures

Dipyrazolium iodide triiodide, [C3N2H5+]2[I−·I3−], has been synthesized and studied by means of X-ray diffraction, differential scanning calorimetry, dielectric measurements, and UV-Vis spectroscopy.

scholarly journals Study on the Miscibility of Polypyrrole and Polyaniline Polymer Blends

2018 ◽  
Vol 2018 ◽  
pp. 1-5 ◽  
Author(s):  
Tekalign A. Tikish ◽  
Ashok Kumar ◽  
Jung Yong Kim
Keyword(s):  
Differential Scanning Calorimetry ◽  
Polymer Blends ◽  
Processing Method ◽  
Phase Behaviour ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Amorphous Nature ◽  
Ft Ir

We report on the miscibility and phase behaviour of polypyrrole-polyaniline (PPy/PANI) as a function of blend composition. The PPy/PANI blends were prepared by solution processing method, using dimethyl sulfoxide (DMSO) solvent. Characterization of the polymer blends was carried out based on the data analysis from Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The PPy/PANI system was successfully formed blends in DMSO solvent. The polymer blends showed almost amorphous nature in XRD spectra because of intermolecular interaction between PPy and PANI macromolecules, which was confirmed by FT-IR data. Specifically, the DSC result for the PPY : PANI = 50 : 50 wt.% blend showed only one glass transition temperature (Tg), which indicates that the two polymers are well miscible without undergoing any phase separation.

scholarly journals Preparation and Characterization of Cetyl Trimethylammonium Intercalated Sericite

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Hao Ding ◽  
Yuebo Wang ◽  
Yu Liang ◽  
Faxiang Qin
Keyword(s):  
Ion Exchange ◽  
Interlayer Space ◽  
Xrd Analysis ◽  
Acid Activation ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Intercalated sericite was prepared by intercalation of cetyl trimethylammonium bromide (CTAB) into activated sericite through ion exchange with the following two steps: the activation of sericite by thermal modification, acid activation and sodium modification; the ion exchange intercalation of CTA+into activated sericite. Effects of reaction time, reaction temperature, CTAB quantity, kinds of medium, and aqueous pH on the intercalation of activated sericite were examined by X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results indicated that the CTA+entered sericite interlayers and anchored in the aluminosilicate interlayers through strong electrostatic attraction. The arrangement of CTA+in sericite interlayers was that alkyl chain of CTA+mainly tilted at an angle about 60° (paraffin-type bilayer) and 38° (paraffin-type monolayer) with aluminosilicate layers. The largest interlayer space was enlarged from 0.9 nm to 5.2 nm. The intercalated sericite could be used as an excellent layer silicate to prepare clay-polymer nanocomposites.

Preparation and Characterization of (Ba0.88Ca0.12)(Zr0.12Ti0.88)O3 Powders and Ceramics Produced by Sol-Gel Process

2010 ◽  
Vol 148-149 ◽  
pp. 1062-1066 ◽  
Author(s):  
Ren Bo Yang ◽  
Wei Guo Fu ◽  
Xiang Yun Deng ◽  
Zhong Wen Tan ◽  
Yan Jie Zhang ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Particle Size ◽  
Piezoelectric Coefficient ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
X Ray ◽  
Sol Gel Process

The (Ba0.88Ca0.12)( Zr0.12Ti0.88)O3 powders and piezoelectric ceramics were prepared by sol-gel process. The reaction process was analyzed with the help of thermo gravimetric and differential scanning calorimetry. X-ray diffraction characterized results showed that the structure of the (Ba0.88Ca0.12)( Zr0.12Ti0.88)O3 powders was perovskite structure and the particle size was approximately 37nm. Piezoelectric measurements revealed that Curie temperature and the maximum piezoelectric coefficient d33 is 95°C and 215pm/V, respectively.

Preparation and Characterization of Tea Polyphenols/Starch Inclusion Complex

2013 ◽  
Vol 432 ◽  
pp. 413-417 ◽  
Author(s):  
Li Ming Zhang ◽  
Zhi Ying Hu ◽  
Li Hu Yan ◽  
Run Liu Li ◽  
Cheng Wei Cao ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Inclusion Complex ◽  
Inclusion Complexes ◽  
Tea Polyphenols ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
The Stability ◽  
Good Retention

In order to improving the stability and bioavailability of tea polyphenols (TP), the TP/starchinclusion complex(TPSIC) was prepared by adding TP to starch slurry during gelatinization, and its TPreleasing behaviorswas investigated. The formation of inclusion complex was confirmed by powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The TPSIC showed a characteristic of V-type crystallinity and a looser gel matrix. The encapsulation increased the stability of TP and generated a good releasing behavior after enzymatic erosion. The lower releasing rate indicated that the prepared inclusion complexes had good retention ability and effectively reduced the releasing rate of TP. The releasing rate of TPSIC increased with the increase of TP concentration.

Sign in / Sign up

Export Citation Format

Share Document