scholarly journals DEVELOPMENT AND EVALUATION OF MEDICATED CHEWING GUM OF RALOXIFENE HYDROCHLORIDE

2021 ◽  
Vol 9 (3) ◽  
Author(s):  
Rikin Patel ◽  
Jignesh Darji ◽  
Nikunj Patadiya ◽  
Mitesh Thummar
Keyword(s):  
Drug Release ◽  
Study Drug ◽  
Major Change ◽  
Stability Study ◽  
Taste Masking ◽  
Chewing Gum ◽  
Drug Content ◽  
Weight Variation ◽  
Study Results ◽  
Raloxifene Hydrochloride

In this study we formulate Raloxifene hydrochloride, edicated chewing gum to overcome first pass metabolism of it so bioavability increase of drug. We take polyvinyl acetate as chewing gum base. Aspartame, mannitol and sucrose as sweetener. Glycerin as a plasticizer. Beta-cyclodextrine as solubility enhancer and taste masking agent. First we evaluate the API by its melting point after we derived its calibration curve.   After this we select proper ratio of Beta-cyclodextrine and API. After we study drug and excipients compatibility by using FTIR. XRD study perform for API and formulation. After we formulate our formulation and perform post-evaluation study like hardness, weight variation, % drug content and % drug release. From all formulation F5 formulation shows best % drug release and % drug content. After we perform stability study for our formulation and after study no major change show in formulation. And in last we perform buccal permeability study. On basis of all study results we can say that our formulation is successfully formed. Keywords: Raloxifene hydrochloride, Medicated chewing gum, Buccal permeation, Osteoporosis.

scholarly journals DESIGN, DEVELOPMENT AND EVALUATION OF MOUTH DISSOLVING TABLETS OF TOFACITINIB CITRATE

2022 ◽  
pp. 238-245
Author(s):  
MEGHANA RAYKAR ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Release ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Disintegration Time ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Bulk Drug

Objective: This study aims to Formulate Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate with the increase in bioavailability and patient compliance. Methods: Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate were developed by full factorial design at 32levelsand prepared by direct compression method using super integrants like sodium starch glycolate, Ludiflash. The tablets were compressed into compacts on a 10 station tablet machine. The bulk drug was characterised by determining, MP, Solubility, pH and FTIR spectra. Results: The weight variation, hardness and diameter, thickness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies, and stability study, tablet thickness, weight variation and drug content post compression parameters remained consistent and reproducible. All the formulations showed, almost 100 percent of drug release within 75 min. Formulations F1, F2 and F3 were prepared with 5 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F1<F2<F3. Formulations F4, F5 and F6 were prepared with 10 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F4<F5<F6. Formulations F7, F8 and F9 were prepared with 15 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F7<F8<F9. Conclusion: It is concluded that the amount of superdisintegrants decreases disintegration time of tablets, decreases wetting time, increases the cumulative % drug release causes better absorption.

scholarly journals “FORMULATION DEVELOPMENT AND EVALUATION OF GASTRORETENTIVE FLOATING FILMS OF LAFUTIDINE”

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Hir. R. Mehta ◽  
Vijay K. Patel
Keyword(s):  
Drug Release ◽  
Ethyl Cellulose ◽  
Stability Study ◽  
Formulation Development ◽  
Casting Technique ◽  
Drug Content ◽  
Peg 400 ◽  
Weight Variation ◽  
Folding Endurance

The present invention was aimed to formulate and evaluate Lafutidine gastro retentive films. The films were prepared by solvent casting technique using different film forming polymers like HPMC and Ethyl cellulose. PEG 400 used as a plastsizer. The prepared films were evaluated for number of parameters like Physical appearance, Weight variation, Thickness, Folding endurance, Tensile strength, unfolding behavior, floating properties, drug content and In vitro drug release studies. From the trial batches the best release for gastroretentive film was shown by formulation T5 (Ethyl cellulose and PEG 400). Formulation T5 exhibited good appearance, better mechanical strength with acceptable flexibility. Also, formulation T5 was given more than 90 % drug released after 12 hr and 97.56 % Drug content.  For optimization of formulation, 32 factorial design was applied by taking Ethyl cellulose and PEG 400 as an independent variables. Drug release at 8 hour and folding endurance selected as dependent variables. Based on drug release study, L8 batch found most satisfactory in all formulation and the effect of Ethyl cellulose and PEG 400 found significant. L8 batch found stable during stability study. Key words: Lafutidine, Floating Films, Ethyl Cellulose.

Acyclovir Loaded Solid Lipid Nanoparticle Based Cream: A Novel Drug Delivery System

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
EL- Assal I. A. ◽  
Retnowati .
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Antiviral Agent ◽  
Study Drug ◽  
Particle Size Analysis ◽  
Stability Study ◽  
Size Analysis ◽  
Solid Lipid ◽  
Dermal Delivery

Objective of the present investigation was enthused by the possibility to develop solid lipid nanoparticles (SLNs) of hydrophilic drug acyclovir. Also study vitro and vivo drug delivery. Methods: Drug loaded SLNs (ACV-SLNs) were prepared by high pressure homogenization of aqueous surfactant solutions containing the drug-loaded lipids in the melted or in the solid state with formula optimization study (Different lipid concentration, drug loaded, homogenization / stirring speed and compritol 888ATO: drug ratio). ACV - SLN incorporated in cream base. The pH was evaluated and rheological study. Drug release was evaluated and compared with simple cream- drug, ACV – SLN with compritol 888ATO and marketed cream. The potential of SLN as the carrier for dermal delivery was studied. Results: Particle size analysis of SLNs prove small, smooth, spherical shape particle ranged from 150 to 200 nm for unloaded and from 330 to 444 nm for ACV loaded particles. The EE% for optimal formula is 72% with suitable pH for skin application. Rheological behavior is shear thinning and thixotropic. Release study proved controlled drug release for SLNs especially in formula containing compritol88 ATO. Stability study emphasized an insignificant change in SLNs properties over 6 month. In-vivo study showed significantly higher accumulation of ACV in stratum corneum, dermal layer, and receptor compartment compared with blank skin. Conclusion: AVC-loaded SLNs might be beneficial in controlling drug release, stable and improving dermal delivery of antiviral agent(s).

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

DESIGN, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE NASAL IN SITU GELLING FORMULATIONS OF VENLAFAXINE HYDROCHLORIDE FOR BRAIN TARGETTING

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 25-31
Author(s):  
M Priyanka ◽  
◽  
F. S. Dasankoppa ◽  
H. N Sholapur ◽  
NGN Swamy ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Linear Regression Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Drug Content ◽  
Venlafaxine Hydrochloride ◽  
In Situ Gelling

The poor bioavailability and the therapeutic effectiveness exhibited by the anti-depressant venlafaxine hydrochloride on oral administration is overcome by the use of ion-activated gel forming systems that are instilled as drops; these undergo gelation in the nasal cavity. The present study describes the design, characterization and evaluation of mucoadhesive nasal in situ gelling drug delivery of venlafaxine hydrochloride using different polymers like sodium alginate, HPMC and pectin in various concentrations. DSC studies revealed compatibility of the drug and excipients used. The in situ gels were characterized for physicochemical parameters, gelling ability, rheological studies, drug content, drug entrapment efficiency, in vitro mucoadhesive strength, water holding capacity, gel expansion coefficient and in vitro drug release studies. The amount of polymer blends was optimized using 23 full factorial design. The influence of experimental factors on percentage cumulative drug release at the end of 2 and 8 hours were investigated to get optimized formulation. The responses were analyzed using ANOVA and polynomial equation was generated for each response using multiple linear regression analysis. Optimized formulation, F9, containing 1.98% w/V sodium alginate, 0.64% w/V hydroxylpropyl methylcellulose, 0.99% w/V pectin showed percentage cumulative drug release of 19.33 and 80.44 at the end of 2 and 8 hours, respectively, which were close to the predicted values. The optimized formulation was subjected to stability study for three months at 300C /75% RH. The stability study revealed no significant change in pH, drug content and viscosity. Thus, venlafaxine hydrochloride nasal mucoadhesive in situ gel could be successfully formulated to improve bioavailability and to target the brain.

scholarly journals EVALUATION OF STABILITY OF ROPINIROLE HYDROCHLORIDE AND PRAMIPEXOLE DIHYDROCHLORIDE MICROSPHERES AT ACCELERATED CONDITION

2018 ◽  
Vol 10 (4) ◽  
pp. 82
Author(s):  
Koyel Kar ◽  
R. N. Pal ◽  
Gouranga Nandi
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Shelf Life ◽  
Stability Study ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Ropinirole Hydrochloride ◽  
Pramipexole Dihydrochloride

Objective: The objective of the present work was to conduct accelerated stability study as per international council for harmonisation (ICH) guidelines and to establish shelf life of controlled release dosage form of ropinirole hydrochloride and pramipexole dihydrochloride microspheres for a period of 6 mo.Methods: Most optimized batch of ropinirole hydrochloride and pramipexole dihydrochloride (F12 and M12 respectively) were selected and subjected to exhaustive stability testing by keeping the sample in stability oven for a period of 3 and 6 mo. Various parameters like surface morphology, particle size, drug content, in vitro drug release and shelf life were evaluated at 3 and 6 mo period. The surface morphology of the formulated microspheres was determined by scanning electron microscopy (SEM). The particle size of the microspheres was estimated by optical microscopy method. The drug content was assayed by the help of ultra-violet spectrophotometer (UV). The in vitro drug release was performed by using Paddle II type dissolution apparatus and the filtrate was analyzed by UV spectrophotometer. The shelf life of the optimized microspheres was calculated by using the rate constant value of the zero-order reaction.Results: A minor change was recorded in average particle size of F12 and M12 microspheres after storage for 6 mo. For F12 and M12, initially the particle size was 130.00 µm and 128.92 µm respectively and after 6 mo it was found to be 130.92 µm and 128.99 µm respectively. There was no change in surface morphology of F12 and M12 microspheres after 6 mo of storage. The shape of microspheres remained spherical and smooth after 6 mo. An insignificant difference of drug content was recorded after 6 mo compared to the freshly prepared formulation. For F12 and M12, 94.50% and 93.77% of the drug was present initially and after 6 mo 94.45% and 93.72% of the drug was recorded. In vitro drug release was recorded after 6 mo for F12 and M12. Initially, 97.99% and 97.69% of the drug was released till 14th hour respectively for F12 and M12. After 6 mo, 98.23% and 97.99% of the drug was released respectively. The percentage residual drug content revealed that the degradation of microspheres was low. Considering the initial percentage residual drug content as 100%, 99.94% of the drug was recorded for both F12 and M12. The shelf life for F12 and M12 was found to be 10 y 52 d and 10 y 70 d respectively which were determined by the zero-order kinetic equation.Conclusion: A more or less similar surface morphology, particle size, drug content and percent of drug release before and after stability study confirmed the stability of F12 and M12 microspheres after storage for 6 mo and prove the efficacy of the microspheres in the site-specific delivery of drugs in Parkinson’s disease.

scholarly journals An Efficient Herbal Approach for Treating Fungal Infection in Cervical Cancer Patients by Developing and Optimizing a Vaginal Suppository

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Mohammed Ghazwani ◽  
Umme Hani ◽  
Riyaz Ali M. Osmani ◽  
Mohamed Rahamathulla ◽  
M. Yasmin Begum ◽  
...  
Keyword(s):  
Cervical Cancer ◽  
Side Effects ◽  
Drug Release ◽  
Cancer Patients ◽  
Poloxamer 407 ◽  
Vaginal Candidiasis ◽  
Disintegration Time ◽  
Drug Content ◽  
Vaginal Suppository ◽  
Weight Variation

Aim. The study is aimed at developing curcumin suppositories as a promising approach for natural antifungal management of vaginal candidiasis in cervical cancer patients to eradicate side effects produced by current antifungal drugs. The objective of the study was to optimize the suppositories using optimal (custom) design employing Design-Expert 13 software to recognize the concentration of polyethylene glycols (PEG) and Poloxamer 407 and obtain a stable suppository. Methodology. Combinations of PEG 1500 (10%–40%), PEG 6000 (40%–60%), and Poloxamer 407 (5%–30%) were entered as factors, and the responses evaluated were hardness, deformation time, and % drug release. In addition, the formulation was also evaluated for visual examination, weight variation, pH determination, drug content, hardness test, disintegration time, melting zone, deformation time, in vitro drug release, antifungal activity, and stability tests. Results. Suppositories were devoid of holes and cracks, with a characteristic odor and a dark yellowish-orange color. All formulations passed the weight variation test. Formulations exhibited pH ranging from 5.5 to 6.5. Drug content was observed to be 98.65 ± 0.041 % – 99.85 ± 0.041 % . The hardness of the formulation was between 2.9 and 4.2 kg/cm2. The disintegration time ranged from 11 ± 0.052   min to 20 ± 0.011   min . The melting point was between 41 ± 0 . 31 ° C and 58 ± 0 . 62 ° C . Deformation time ranged from 10 ± 0.45 to 35 ± 0.52   min . Most of the formulations resulted in 90% of drug release at 40 min, and the zone of inhibition noted was 19.6 ± 0.4   mm . All the selected factors have a significant effect on the response chosen for the study. Conclusion. The optimized curcumin vaginal suppository formulation can be an efficient herbal treatment devoid of side effects to treat vaginal candidiasis in cervical cancer patients.

scholarly journals FABRICATION AND CHARACTERIZATION OF FAST DISSOLVING FILMS OF ECLIPTA PROSTRATE LEAVES EXTRACT TO TREAT MOUTH ULCERS

2021 ◽  
pp. 263-271
Author(s):  
MANIKIRAN S. S. ◽  
NAGAM SANTHI PRIYA ◽  
B. AUBINE MOLLY ◽  
LAKSHMI PRASANTHI NORI
Keyword(s):  
Drug Release ◽  
Moisture Loss ◽  
Disintegration Time ◽  
Weight Variation ◽  
Eclipta Prostrata ◽  
Release Studies ◽  
Study Results ◽  
The Stability ◽  
Oral Films

Objective: This research focused on the design of fast dissolving herbal film of Eclipta Prostrate leaves extract for mouth ulcers. Methods: The extract of Eclipta Prostrata leaves was formulated as films by solvent casting method using various polymers viz., HPMC E5, HPMC E15, sodium alginate and PVA. The films were designed by using propylene glycol as a plasticizer, SSG as super disintegrate and honey as a sweetener. Furthermore, the films were evaluated for thickness, folding endurance, weight variation, % elongation, surface pH, % moisture uptake, % moisture loss, disintegration and in vitro drug release study. Results: The revealed that all the films were good in appearance and had a smooth texture. Out of all ten formulations, F3 and F5 disintegrated rapidly with a disintegration time of 27 and 32 seconds. The drug release studies revealed that all the formulations had a good release profile, but the F3 formulation showed rapid release i.e. 83.57% in 4 min. The stability studies revealed that the formulations F3 and F5 were found good with non-tackiness, easily separable and disintegrated at 29 and 33 sec respectively with no appearance and drug release. Conclusion: The research revealed that Eclipta prostrate leaves extract can be formulated into oral films for the treatment of mouth ulcers with improved bioavailability and expected patient compliance.

scholarly journals DEVELOPMENT AND EVALUATION OF TRANSDERMAL FILM CONTAINING SOLID LIPID NANOPARTICLES OF RIVASTIGMINE TARTRATE

2017 ◽  
Vol 9 (6) ◽  
pp. 85
Author(s):  
G. Ravi ◽  
N. Vishal Gupta
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Cost Effective ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Study Results ◽  
Transdermal Film

Objective: The objective of present investigation was to develop rivastigmine tartrate transdermal film employing factorial design.Methods: The formulations were designed by Design-Expert software-version10. A series of films were prepared by solvent casting method using polymers, plasticizer, permeation enhancer and other solvents. Transdermal films were evaluated for flatness, drug content, tensile strength, in vitro drug release and ex vivo skin permeation study.Results: The flatness was found 100% (percentage) for all film formulations. The drug content of transdermal film was found in the range of 96.51±0.2 to 98.81±0.3%. The tensile strength of transdermal film was found in the range of 6.28±0.06 to 11.56±0.03 N/mm2 (newton/millimeter2) and in vitro drug release at 24th h (hour) was found in the range of 86.24±0.25 to 96.1±0.48%% for various formulations and ex vivo skin permeation study results at 24th h was found in the range of 85.83±0.74 to 97.36±0.93%.Conclusion: These results support the feasibility of developing transdermal film of rivastigmine tartrate for human applications. Thus, transdermal delivery of rivastigmine tartrate film is a safe, painless and cost effective drug delivery system for Alzheimer’s patients.

scholarly journals Formulation design, optimization & in vitro evaluation of novel orodissolving tablets of efavirenz for hiv infections

2015 ◽  
Vol 49 (3) ◽  
pp. 173-180
Author(s):  
T Ayyappan ◽  
C Poojitha ◽  
T Vetrichelvan
Keyword(s):  
Drug Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time

In the present work, orodissolving tablets of Efavirenz were prepared by direct compression method with a view to enhance patient compliance. A 23 full factorial design was applied to investigate the combined effect of three formulation variables. Amount of crospovidone, croscarmellose sodium and sodium starch glycolate were used as superdisintegrant material along with direct compressible mannitol to enhance mouth feel. The prepared batches of tablets were evaluated for hardness, friability, weight variation, disintegration time, wetting time, drug content and in-vitro dissolution studies. Based on wetting time, disintegration time, the formulation containing crospovidone (5% w/v), carscarmellose sodium (5% w/v) and sodium starch glycolate (8% w/v) was found to be promising and tested for in-vitro drug release pattern (in 0.1 N HCl), short term stability and drug- superdisintegrants interaction. Surface response plots are presented to graphically represent the effect of independent variables (conc. of superdisintegrants) on the in-vitro dissolution time. The validity of the generated mathematical model was tested by preparing extra-design check point formulation. The formulation showed nearly faster drug release compared to the conventional commercial tablet formulation. Stability studies on the optimized formulation indicated that there was no significant change found in physical appearance, hardness, disintegration time, drug content and in-vitro drug release. DOI: http://dx.doi.org/10.3329/bjsir.v49i3.22131 Bangladesh J. Sci. Ind. Res. 49(3), 173-180, 2014

Sign in / Sign up

Export Citation Format

Share Document