Acyclovir Loaded Solid Lipid Nanoparticle Based Cream: A Novel Drug Delivery System

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
EL- Assal I. A. ◽  
Retnowati .
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Antiviral Agent ◽  
Study Drug ◽  
Particle Size Analysis ◽  
Stability Study ◽  
Size Analysis ◽  
Solid Lipid ◽  
Dermal Delivery

Objective of the present investigation was enthused by the possibility to develop solid lipid nanoparticles (SLNs) of hydrophilic drug acyclovir. Also study vitro and vivo drug delivery. Methods: Drug loaded SLNs (ACV-SLNs) were prepared by high pressure homogenization of aqueous surfactant solutions containing the drug-loaded lipids in the melted or in the solid state with formula optimization study (Different lipid concentration, drug loaded, homogenization / stirring speed and compritol 888ATO: drug ratio). ACV - SLN incorporated in cream base. The pH was evaluated and rheological study. Drug release was evaluated and compared with simple cream- drug, ACV – SLN with compritol 888ATO and marketed cream. The potential of SLN as the carrier for dermal delivery was studied. Results: Particle size analysis of SLNs prove small, smooth, spherical shape particle ranged from 150 to 200 nm for unloaded and from 330 to 444 nm for ACV loaded particles. The EE% for optimal formula is 72% with suitable pH for skin application. Rheological behavior is shear thinning and thixotropic. Release study proved controlled drug release for SLNs especially in formula containing compritol88 ATO. Stability study emphasized an insignificant change in SLNs properties over 6 month. In-vivo study showed significantly higher accumulation of ACV in stratum corneum, dermal layer, and receptor compartment compared with blank skin. Conclusion: AVC-loaded SLNs might be beneficial in controlling drug release, stable and improving dermal delivery of antiviral agent(s).

scholarly journals Bioadhesive vaginal tablets containing spray dried microspheres loaded with clotrimazole for treatment of vaginal Candidiasis

2013 ◽  
Vol 63 (3) ◽  
pp. 359-372 ◽  
Author(s):  
Naresh Vishal Gupta ◽  
Shirodker Natasha ◽  
Anil Getyala ◽  
Ramnath Sudeendra Bhat
Keyword(s):  
Drug Release ◽  
Chemical Interaction ◽  
Drug Loading ◽  
Particle Size Analysis ◽  
Vaginal Candidiasis ◽  
Size Analysis ◽  
In Vitro Drug Release ◽  
Dsc Studies

Abstract The aim of the present investigation was to prepare and evaluate novel bioadhesive vaginal tablets containing clotrimazole loaded microspheres in order to provide long-term therapeutic activity at the site of infection. Tablets were prepared by incorporating drug loaded microspheres and using bioadhesive polymers hydroxypropylmethylcellulose, sodium carboxymethylcellulose and Carbopol. Microspheres were prepared by the spray drying technique using Eudragit RS-100 and Eudragit RL-100. Microspheres were characterized by SEM, DSC, FTIR, particle size analysis and evaluated for percentage yield, drug loading, encapsulation efficiency and in vitro drug release. To achieve bioadhesion to the mucosal tissue, optimized microspheres were incorporated into bioadhesive tablets and were evaluated for in vitro drug release, in vitro and in vivo mucoadhesion. FTIR and DSC studies showed that no chemical interaction occurred between the drug and polymers. The sphericity factor indicated that the prepared microspheres were spherical. Formulation Mt6 indicated a controlled in vitro drug release and good bioadhesive strength. The in vivo images confirmed the bioadhesion and retention property of tablets up to 24 h. The results indicated that this drug delivery system can be explored for controlled intravaginal drug release.

scholarly journals A Two-Photon Microimaging-Microdevice System for Four-Dimensional Imaging of Local Drug Delivery in Tissues

2021 ◽  
Vol 22 (21) ◽  
pp. 11752
Author(s):  
Guigen Liu ◽  
Veronica Valvo ◽  
Sebastian W. Ahn ◽  
Devon Thompson ◽  
Kyle Deans ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Immune Cell ◽  
Drug Distribution ◽  
Study Drug ◽  
Tissue Response ◽  
Local Drug Delivery ◽  
Two Photon ◽  
Tissue Responses

Advances in the intratumor measurement of drug responses have included a pioneering biomedical microdevice for high throughput drug screening in vivo, which was further advanced by integrating a graded-index lens based two-dimensional fluorescence micro-endoscope to monitor tissue responses in situ across time. While the previous system provided a bulk measurement of both drug delivery and tissue response from a given region of the tumor, it was incapable of visualizing drug distribution and tissue responses in a three-dimensional (3D) way, thus missing the critical relationship between drug concentration and effect. Here we demonstrate a next-generation system that couples multiplexed intratumor drug release with continuous 3D spatial imaging of the tumor microenvironment via the integration of a miniaturized two-photon micro-endoscope. This enables optical sectioning within the live tissue microenvironment to effectively profile the entire tumor region adjacent to the microdevice across time. Using this novel microimaging-microdevice (MI-MD) system, we successfully demonstrated the four-dimensional imaging (3 spatial dimensions plus time) of local drug delivery in tissue phantom and tumors. Future studies include the use of the MI-MD system for monitoring of localized intra-tissue drug release and concurrent measurement of tissue responses in live organisms, with applications to study drug resistance due to nonuniform drug distribution in tumors, or immune cell responses to anti-cancer agents.

scholarly journals Development and Evaluation of Nanoemulsifying Preconcentrate of Curcumin for Colon Delivery

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
Jyoti Wadhwa ◽  
Abhay Asthana ◽  
Gyati Shilakari ◽  
Arun Kumar Chopra ◽  
Ranjit Singh
Keyword(s):  
Drug Release ◽  
Phosphate Buffer ◽  
Stability Study ◽  
Alkaline Media ◽  
Systemic Absorption ◽  
Size Analysis ◽  
Globule Size ◽  
Time Required

The present study aimed to develop and optimize a nanoemulsifying preconcentrate formulation of curcumin with good emulsification ability and optimal globule size, for controlled targeting in colon. Content of formulation variables, namely,X1(Peceol),X2(Cremophor-EL), andX3(Transcutol HP), were optimized by Box-Behnken design of experiments for its impact on mean globule size (Y1), emulsification time (Y2), and time required for drug release (85%) in phosphate buffer (pH 7.2),t85%(Y3). Transmission electron micrographs confirmed that there is no coalescence among globules, with size range concordant with the globule size analysis by dynamic light scattering technique (100 nm). 3D plots indicated that concentration of formulation ingredients significantly influences the formulation properties (globule size, emulsification time, and drug release).In vitrorelease profile (in phosphate buffer; pH 7.2) represents the fact that more than 50% of the drug was released within initial 15 min whereasin vivorelease showed limited systemic absorption (Cmax200 ng/mL) of curcumin. Stability study ensures the protection of drug in alkaline media which may further confirm the localised delivery of drug to colonic region. Study demonstrated that the nanoemulsifying preconcentrate can be a promising system for the colon specific delivery of curcumin to treat local pathologies.

scholarly journals Development and Evaluation of Nanoemulsions for Phenytoin Drug Loading

2021 ◽  
pp. 1-13
Author(s):  
Neha Joshi ◽  
Vijay Juyal ◽  
Himanshu Joshi ◽  
Shweta Dang
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Phase Diagrams ◽  
Release Rate ◽  
Phase Inversion ◽  
Drug Loading ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Spontaneous Emulsification

Aims: To understand about the nanoemulsion types and the process formation of spontaneous emulsification method by phase inversion. Then to test the different combinations of Oil, Surfactants and Co-surfactants for formation of suitable nanoemulsions for phenytoin drug loading. Study Design: Spontaneous emulsification method by phase inversion used to form the nanoemulsions. Place and Duration of Study: Department of Pharmaceutical Sciences, Kumaun University, Nainital, Uttarakhand, India. Methodology: Phenytoin is a widely used drug in anticonvulsants class for epilepsy which comes under BCS Class II of drug category. Phenytoin has high permeability property but it also shows low solubility property which makes it difficult to absorb from GI tract hence make a poor penetration into the brain to target disease in the CNS. To overcome the situation of poor delivery of phenytoin, the requirement of nanoparticulate drug delivery as an innovative and effective drug delivery system from nose to brain raised. The objective of our study was to find the best combination of oil and Smix (surfactant and co-surfactant mixture) to form o/w (Oil in Water) nanoemulsions suitable for loading phenytoin drug using spontaneous emulsification method for brain targeting. Results: Based on different compositions of oil (sunflower), surfactants (Tween-20), and co-surfactants (Transcutol P), forty-five test mixtures were made, water titration technique was employed for preparing the pseudo-ternary-phase diagrams. On the basis of these phase diagrams twenty-five phenytoin loaded nanoemulsions were formulated and further examined. After physicochemical characterization of these formulations the viscosity, pH, RI and % transmittance was found (6.149 ± 0.084 to 9.114 ± 0.027), (6.546 ± 0.018 to 6.656 ± 0.017), (1.395 ± 0.003 to 1.41 ± 0.005) and (94.53 ± 1.4% to 95.58 ± 1.2%) respectively. The release rate of phenytoin was found very satisfactory i.e., 98.51 ± 0.25 % to 99.82 ± 0.28 % after 24 hrs. The four formulations showed best release rate had further taken for particle size analysis. The particle size analysis showed that all the properties were in the desired range i.e., droplet size (18.9 to 21.9), zeta potential (-12.4 to -28.8), PDI (0.334 to 0.363). The study shows that the phenytoin loaded nanoemulsion is possible to make by water titration method and shall have a good drug release rate. Conclusion: The nanoemulsion formulations passed through stress testing had also showed good release rate of phenytoin. Also, the other parameters like viscosity, pH, RI and percentage transmittance were in a quit satisfactory range to proceed further with these formulations. The particle size analysis confirms the formation of nanoemultions which had very good drug release rates.

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

Formulation, Development and Characterization of Floating Beads of Diltiazem Hydrochloride

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Anamika Saxena Saxena ◽  
Santosh Kitawat ◽  
Kalpesh Gaur ◽  
Virendra Singh
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery Systems ◽  
Entrapment Efficiency ◽  
Repeated Administration ◽  
Alginate Beads ◽  
Delivery Systems ◽  
Sem Analysis ◽  
Formulation Development

The main goal of any drug delivery system is to achieve desired concentration of the drug in blood or tissue, which is therapeutically effective and nontoxic for a prolonged period. Various attempts have been made to develop gastroretentive delivery systems such as high density system, swelling, floating system. The recent developments of FDDS including the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, and their classification and formulation aspects are covered in detail. Gastric emptying is a complex process and makes in vivo performance of the drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug-delivery systems for more than 12 hours. The floating or hydrodynamically controlled drug delivery systems are useful in such application. Background of the research: Diltiazem HCL (DTZ), has short biological half life of 3-4 h, requires rather high frequency of administration. Due to repeated administration there may be chances of patient incompliance and toxicity problems. Objective: The objective of study was to develop sustained release alginate beads of DTZ for reduction in dosing frequency, high bioavailability and better patient compliance. Methodology: Five formulations prepared by using different drug to polymer ratios, were evaluated for relevant parameters and compared. Alginate beads were prepared by ionotropic external gelation technique using CaCl2 as cross linking agent. Prepared beads were evaluated for % yield, entrapment efficiency, swelling index in 0.1N HCL, drug release study and SEM analysis. In order to improve %EE and drug release, LMP and sunflower oil were used as copolymers along with sodium alginate.

Development of Solid Lipid Nanoparticles of Lamivudine for Brain Targeting

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Pravin Patil ◽  
Anil Sharma ◽  
Subhash Dadarwal ◽  
Vijay Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Rotation Speed ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Brain Penetration ◽  
Solid Lipid ◽  
Diffusion Technique

The objective of present investigation was to enhance brain penetration of Lamivudine, one of the most widely used drugs for the treatment of AIDS. This was achieved through incorporating the drug into solid lipid nanoparticles (SLN) prepared by using emulsion solvent diffusion technique. The formulations were characterized for surface morphology, size and size distribution, percent drug entrapment and drug release. The optimum rotation speed, resulting into better drug entrapment and percent yield, was in the range of 1000-1250 r/min. In vitro cumulative % drug release from optimized SLN formulation was found 40-50 % in PBS (pH-7.4) and SGF (pH-1.2) respectively for 10 h. After 24 h more than 65 % of the drug was released from all formulations in both mediums meeting the requirement for drug delivery for prolong period of time.

Nanostructured Ketorolac-Tromethamine/MCF: Synthesis, Characterization and Application in Drug Release System

2018 ◽  
Vol 14 (5) ◽  
pp. 432-439 ◽  
Author(s):  
Juliana M. Juarez ◽  
Jorgelina Cussa ◽  
Marcos B. Gomez Costa ◽  
Oscar A. Anunziata
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Therapeutic Efficacy ◽  
Drug Delivery Systems ◽  
Controlled Drug Release ◽  
Delivery Systems ◽  
The Body ◽  
Fickian Diffusion ◽  
Ketorolac Tromethamine

Background: Controlled drug delivery systems can maintain the concentration of drugs in the exact sites of the body within the optimum range and below the toxicity threshold, improving therapeutic efficacy and reducing toxicity. Mesostructured Cellular Foam (MCF) material is a new promising host for drug delivery systems due to high biocompatibility, in vivo biodegradability and low toxicity. Methods: Ketorolac-Tromethamine/MCF composite was synthesized. The material synthesis and loading of ketorolac-tromethamine into MCF pores were successful as shown by XRD, FTIR, TGA, TEM and textural analyses. Results: We obtained promising results for controlled drug release using the novel MCF material. The application of these materials in KETO release is innovative, achieving an initial high release rate and then maintaining a constant rate at high times. This allows keeping drug concentration within the range of therapeutic efficacy, being highly applicable for the treatment of diseases that need a rapid response. The release of KETO/MCF was compared with other containers of KETO (KETO/SBA-15) and commercial tablets. Conclusion: The best model to fit experimental data was Ritger-Peppas equation. Other models used in this work could not properly explain the controlled drug release of this material. The predominant release of KETO from MCF was non-Fickian diffusion.

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

scholarly journals Novel concept of the smart NIR-light–controlled drug release of black phosphorus nanostructure for cancer therapy

2018 ◽  
Vol 115 (3) ◽  
pp. 501-506 ◽  
Author(s):  
Meng Qiu ◽  
Dou Wang ◽  
Weiyuan Liang ◽  
Liping Liu ◽  
Yin Zhang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Cancer Therapy ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Near Infrared ◽  
Black Phosphorus ◽  
Deep Penetration ◽  
Nir Light

A biodegradable drug delivery system (DDS) is one the most promising therapeutic strategies for cancer therapy. Here, we propose a unique concept of light activation of black phosphorus (BP) at hydrogel nanostructures for cancer therapy. A photosensitizer converts light into heat that softens and melts drug-loaded hydrogel-based nanostructures. Drug release rates can be accurately controlled by light intensity, exposure duration, BP concentration, and hydrogel composition. Owing to sufficiently deep penetration of near-infrared (NIR) light through tissues, our BP-based system shows high therapeutic efficacy for treatment of s.c. cancers. Importantly, our drug delivery system is completely harmless and degradable in vivo. Together, our work proposes a unique concept for precision cancer therapy by external light excitation to release cancer drugs. If these findings are successfully translated into the clinic, millions of patients with cancer will benefit from our work.

Sign in / Sign up

Export Citation Format

Share Document