scholarly journals Design, Development and Evaluation of Matrix Tablet

2021 ◽  
Vol 10 (6) ◽  
Author(s):  
Arindam Chatterjee ◽  
Deeksha Sharma ◽  
Anuj Mishra
Keyword(s):  
Sustained Release ◽  
Diffusion Processes ◽  
Drug Distribution ◽  
Potential Method ◽  
Matrix Tablets ◽  
Matrix Tablet ◽  
Design Development ◽  
Sustain Release ◽  
The Many ◽  
And Diffusion

Recently, sustained release formulations have become a very helpful tool in medical practice, providing patients with a variety of benefits. Sustained release is also a potential method for reducing pharmacological side effects by preventing fluctuations in the concentration of the drug in the plasma. Nowadays, relatively few pharmaceuticals are emerging from research and development, and current drugs are suffering from resistance as a result of their inappropriate usage. Thus, altering the operation is an appropriate and optimum method of increasing the effectiveness of a medicine by a little variation in the drug distribution. The release of the medication through such a system is regulated by both dissolution and diffusion processes. Most medications, if not correctly designed, may quickly release the drug at a higher pace, resulting in hazardous concentrations of the drug upon oral administration. This review discusses the fundamentals of sustained release formulations and the many varieties available. Key words: Matrix tablets, Sustained release, Sustain release polymers, Patient convenience and compliance.

Design, Development and Optimization of Glibenclamide Sustained Release Matrix Tablet by Using Natural Polymers

2020 ◽  
Vol 3 (3) ◽  
pp. 197-211
Author(s):  
Kuldeep H. Ramteke ◽  
Dipika E. Ghadge ◽  
Savita A. Palve ◽  
Sachin S. Gaikwad
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Matrix Tablets ◽  
Locust Bean Gum ◽  
Matrix Tablet ◽  
Design Development ◽  
Natural Polymers ◽  
Drug Content ◽  
Locust Bean

Background: Tablets being the conventional dosage forms can be modified for providing the desired therapeutic effect to the patients. The network of matrix in the tablet allows the drug release to be slowed down considerably. Objective: The prime objective of the study was to formulate sustained release glibenclamide matrix tablets using locust bean gum and karaya gum as a matrix polymer. Methods: Tablets were formulated by optimization using 32 factorial designs by direct compression method using different drug: polymer concentrations. The dependent variables selected were % cumulative drug release (Y1) and % drug content (Y2). The independent variables are the amount of locust bean gum (X1) and karayagum (X2). Drug-polymer compatibility studies were confirmed by FTIR and DSC. The pre-compression properties of powder were assessed indicating a good flow property. The evaluation results of the tablets were found to be within the Indian Pharmacopoeial limit. In this work, the effect of diluents type and polymer type was studied on the drug release with its increase in concentration. Results: All the formulations showed retarded drug release as the concentration of the polymer was increased. Formulation F8 was selected as the best-optimized formulation with about 100.56% drug release within 12 h. Release kinetics was carried out and it was found to be zero-order release and from assay, drug content was found to be in limits. Conclusion: ANOVA analysis indicated that the studied variables affected the response variables significantly. The optimized formulation was stable. Hence, it is concluded that the Glibenclamide sustained release matrix tablet containing natural polymers were successfully formulated by using 32 factorial design.

scholarly journals Design, development and optimization of sustained release floating, bioadhesive and swellable matrix tablet of ranitidine hydrochloride

PLoS ONE ◽  
2021 ◽  
Vol 16 (6) ◽  
pp. e0253391
Author(s):  
Birhanu Nigusse ◽  
Tsige Gebre-Mariam ◽  
Anteneh Belete
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Lag Time ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Design Development ◽  
Gastro Retentive

Ranitidine HCl, a selective, competitive histamine H2-receptor antagonist with a short biological half-life, low bioavailability and narrow absorption window, is an ideal candidate for gastro-retentive drug delivery system (GRDDS). Controlled release with an optimum retentive formulation in the upper stomach would be an ideal formulation for this drug. The aim of the present study was therefore to develop, formulate and optimize floating, bioadhesive, and swellable matrix tablets of ranitidine HCl. The matrix tablets were prepared using a combination of hydroxypropyl methylcellulose (HPMC) and sodium carboxymethyl cellulose (NaCMC) as release retarding polymers, sodium bicarbonate (NaHCO3) as gas generating agent and microcrystalline cellulose (MCC) as direct compression diluent. Central composite design (CCD) was used to optimize the formulation and a total of thirteen formulations were prepared. Concentration of HPMC/NaCMC (3:1) (X1) and NaHCO3 (X2) were selected as independent variables; and floating lag time (Y1), bioadhesive strength (Y2), swelling index at 12 h (Y3), cumulative drug release at 1 h (Y4), time to 50% drug release (t50%) (Y5) and cumulative drug release at 12 h (Y6) were taken as the response variables. The optimized batch showed floating lag time of 5.09 sec, bioadhesive strength of 29.69 g, swelling index of 315.04% at 12 h, t50% of 3.86 h and drug release of 24.21% and 93.65% at 1h and 12 h, respectively, with anomalous release mechanism. The results indicate that sustained release matrix tablet of ranitidine HCl with combined floating, bioadhesive and swelling gastro-retentive properties can be considered as a strategy to overcome the low bioavailability and in vivo variation associated with the conventional ranitidine HCl tablet.

Effects of release modifier on Carvedilol release from Kollidon SR based matrix

2012 ◽  
Vol 1 (8) ◽  
pp. 186 ◽  
Author(s):  
Urmi Das ◽  
Mohammad Salim Hossain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Microcrystalline Cellulose ◽  
Matrix Tablets ◽  
Dissolution Time ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Weight Variation ◽  
The Matrix ◽  
Tablet Formulations

<p>Sustained release Carvedilol matrix tablets constituting Kollidon SR were developed in this study in an attempt to investigate the effect of release modifiers on the release profile of Carvedilol from matrix. Three matrix tablet formulations were prepared by direct compression of Kollidon SR in combination with release modifier (HPMC and Microcrystalline Cellulose) and magnesium stearate. Tablets containing only Kollidon SR with the active ingredient demonstrated a rapid rate of drug release. Incorporation of HPMC in the matrix tablet prolonged the release of drug but incorporation of Microcrystalline Cellulose showed superimposable release pattern with an initial burst effect as confirmed by mean dissolution time and Higuchi release rate data. After 7 hours of dissolution, Carvedilol release from the matrix systems were 91.42%, 83.41%, from formulation F1 and F2 respectively. Formulation F3 exhibited 100 % release at 4 hours. All the tablet formulations showed acceptable pharmaco-technical properties and complied with the in-house specifications for tablet weight variation, friability, hardness, thickness, and diameter. Prepared tablets also showed sustained release property for carvedilol. The drug release mechanism from the matrix tablets of F1 and F2 was found to be followed by Fickian and F3 by Non-Fickian mechanism.</p><p>DOI: <a href="http://dx.doi.org/10.3329/icpj.v1i8.11095">http://dx.doi.org/10.3329/icpj.v1i8.11095</a></p> <p>International Current Pharmaceutical Journal 2012, 1(8): 186-192</p>

Colon targeting oral matrix tablets of mesalamine: Design, development and invitro evaluation

2020 ◽  
Vol 10 (1) ◽  
pp. 18-27
Author(s):  
Audinarayana N ◽  
Anala Srinivasulu ◽  
Vellore Sruthikumari ◽  
Likitha ◽  
Ananda Deepak V
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Stability Study ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Matrix Tablet ◽  
Cellulose Acetate Phthalate ◽  
Design Development ◽  
Release Pattern ◽  
The Matrix

The principle in this present research is to formulate Mesalamine containing colon targeted tablets by using different polymers and evaluate the effect of different polymers in drug release pattern. The matrix tablets of Mesalamine are formulated by polysaccharides based polymers like Cellulose acetate phthalate (CAP), Ethyl cellulose (EC), Guar gum (GG) and Xanthan gum (XG) which protects the drug to release in Stomach and Small Intestine. The invitro drug dissolution investigation of F2 (GG and XG) Matrix tablet was controlled by swelling into a viscous gel in colonic pH, which have been accomplished as the best tablet. The optimized tablet F2 was found to be stable in stability study (short term) with reproducible evaluation data, which also shows the highest swelling index, increased viscosity in colonic pH. The drug release pattern from the F2 formulation follows swelling and erosion behavior. From the data it show that F2 tablets suitable for providing colon targeted drug delivery.

scholarly journals Development and Bio-Predictive Evaluation of Biopharmaceutical Properties of Sustained-Release Tablets with a Novel GPR40 Agonist for a First-in-Human Clinical Trial

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 804
Author(s):  
Ewelina Juszczyk ◽  
Kamil Kisło ◽  
Paweł Żero ◽  
Ewa Tratkiewicz ◽  
Maciej Wieczorek ◽  
...  
Keyword(s):  
Clinical Trial ◽  
Sustained Release ◽  
Development Strategy ◽  
Matrix Tablets ◽  
Matrix Tablet ◽  
Mechanical Agitation ◽  
Development Cycle ◽  
Dissolution Tests ◽  
Sustained Release Tablets ◽  
Biopharmaceutical Properties

Sustained-release (SR) formulations may appear advantageous in first-in-human (FIH) study of innovative medicines. The newly developed SR matrix tablets require prolonged maintenance of API concentration in plasma and should be reliably assessed for the risk of uncontrolled release of the drug. In the present study, we describe the development of a robust SR matrix tablet with a novel G-protein-coupled receptor 40 (GPR40) agonist for first-in-human studies and introduce a general workflow for the successful development of SR formulations for innovative APIs. The hydrophilic matrix tablets containing the labeled API dose of 5, 30, or 120 mg were evaluated with several methods: standard USP II dissolution, bio-predictive dissolution tests, and the texture and matrix formation analysis. The standard dissolution tests allowed preselection of the prototypes with the targeted dissolution rate, while the subsequent studies in physiologically relevant conditions revealed unwanted and potentially harmful effects, such as dose dumping under an increased mechanical agitation. The developed formulations were exceptionally robust toward the mechanical and physicochemical conditions of the bio-predictive tests and assured a comparable drug delivery rate regardless of the prandial state and dose labeled. In conclusion, the introduced development strategy, when implemented into the development cycle of SR formulations with innovative APIs, may allow not only to reduce the risk of formulation-related failure of phase I clinical trial but also effectively and timely provide safe and reliable medicines for patients in the trial and their further therapy.

scholarly journals The Effect of Manufacturing Methods and Different Shapes on the Release Pattern of Diclofenac Sodium Matrix Tablet

1970 ◽  
Vol 2 (2) ◽  
pp. 76-80
Author(s):  
Tajnin Ahmed ◽  
Muhammad Shahidul Islam ◽  
Tasnuva Haque ◽  
Mohammad Abusyed
Keyword(s):  
Sustained Release ◽  
Release Rate ◽  
Diclofenac Sodium ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Compression Method ◽  
Release Pattern ◽  
Peg 600

In the present study sustained release diclofenac sodium matrix tablets were prepared using Kollidon SR polymer. Hydroxypropyl methylcellulose (HPMC 15 cps) and poly ethylene glycol (PEG-600) polymers respectively were used in formulating tablets prepared by direct compression and wet granulation methods. The polymers were used to explore the release pattern of the drug into the dissolution media. The tablets were also prepared in various shapes (caplet oval, round oval and flat oval). A comparatively higher release rate of drug was obtained from the polymer HPMC 15 cps at 10% concentration for directly compressed matrix tablet than those containing 20% of HPMC after a definite period of time. In wet granulation process, 10% PEG-600 containing tablets showed a better release than those containing 20% PEG. The drug release was also found to be sustained in case of wet granulation method than that of the direct compression method. Again the caplet shaped tablets in case of direct compression method showed better release rate of drug than those of the round oval and flat oval shaped tablets. Thus the result of this study shows that the proper selection of the percentage of polymer and the suitable shape of tablet and proper manufacturing method can provide a greater opportunity in designing sustained release dosage forms. Key words: Matrix tablet; release pattern; direct compression; wet granulation; PEG 600; Kollidon SR.DOI: 10.3329/sjps.v2i2.5828Stamford Journal of Pharmaceutical Sciences Vol.2(2) 2009: 76-80

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLET OF LORNOXICAM BY DIRECT COMPRESSION METHOD

2021 ◽  
Vol 10 (5) ◽  
pp. 131-136
Author(s):  
Asim pasha ◽  
C N Somashekhar
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Prolonged Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Dissolution Profile ◽  
Drug Content

The aim of the present work was to develop sustained release Lornoxicam matrix tablets with polymers like HPMC K15M, Ethyl cellulose, and Crospovidone as carriers in varying quantities. Direct compression was used to make matrix tablets. Various assessment parameters, such as hardness, friability, thickness, percent drug content, weight variation, and so on, were applied to the prepared formulations. In vitro dissolution studies were carried out for 24 hrs. The tablets were subjected to in-vitro drug release in (pH 1.2) for first 2 hrs. Then followed by (pH 6.8) phosphate buffer for next 22 hrs. And the results showed that among the six formulations FL3 showed good dissolution profile to control the drug release respectively. The drug and polymer compatibility were tested using FT-IR spectroscopy, which revealed that the drug was compatible with all polymers. It is also required to design an appropriate prolonged release formulation for Lornoxicam in order to maintain the drug's release. Hence by using the compatible polymers sustained release tablets were formulated and subjected for various types of evaluation parameters like friability, hardness, drug content and dissolution behaviour. Finally, the findings reveal that the prepared sustained release matrix tablets of lornoxicam have improved efficacy and patient compliance.

scholarly journals A REVIEW ON DISINTEGRATION CONTROL MATRIX TABLETS

2018 ◽  
Vol 8 (5) ◽  
pp. 19-22
Author(s):  
Pralhad K. Kanke ◽  
Pankaj Sawant ◽  
Ajit Jadhav ◽  
Md. Rageeb Md. Usman
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Solid Dispersion ◽  
Gastrointestinal Transit ◽  
Matrix Tablets ◽  
Surface Erosion ◽  
Matrix Tablet ◽  
Control Matrix ◽  
Dispersion Technique ◽  
Wax Coating

A number of sustained release formulations are available in the market which successfully sustained the drug release over a prolonged period of time by different mechanisms. The new approach for sustaining the drug release is disintegration control matrix tablet which sustained the drug release up to 24hrs by controlling the disintegration rate of tablet. Disintegration control matrix tablet (DCMT) mainly forms the granules containing drug and disintegrating agent such as low substituted hydroxyl propyl cellulose by various methods such as solid dispersion technique. The sustained release of drug is maintained by increasing the wax coating or decreasing the amount of disintegrants. The release of drug from tablet is uniform throughout till all the drug releases from tablet as it involves drug release by diffusion, dissolution and surface erosion mechanism. DCMT increases the solubility of drug and improves the bioavailability without disturbing gastrointestinal transit. BCS Class II, III, IV drugs are the best candidate for DCMT formulations. Keywords: Disintegration control matrix tablet (DCMT), Wax, Disintegrating agent, Solid dispersion.

scholarly journals Development and evaluation of sustained release losartan potassium matrix tablet using kollidon SR as release retardant

2012 ◽  
Vol 48 (4) ◽  
pp. 621-628 ◽  
Author(s):  
Shahid Sarwar ◽  
Mohammad Salim Hossain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Matrix Tablets ◽  
Losartan Potassium ◽  
Dissolution Time ◽  
Release Mechanism ◽  
Matrix Tablet

The present study was undertaken to develop sustained release (SR) matrix tablets of losartan potassium, an angiotensin-II antagonist for the treatment of hypertension. The tablets were prepared by direct compression method, along with Kollidon SR as release retardant polymer. The amount of losartan potassium remains fixed (100 mg) for all the three formulations whereas the amounts of Kollidon SR were 250 mg, 225 mg, and 200 mg for F-1, F-2, and F-3 respectively. The evaluation involves three stages: the micromeritic properties evaluation of granules, physical property studies of tablets, and in-vitro release kinetics studies. The USP apparatus type II was selected to perform the dissolution test, and the dissolution medium was 900 mL phosphate buffer pH 6.8. The test was carried out at 75 rpm, and the temperature was maintained at 37 ºC ± 0.5 ºC. The release kinetics was analyzed using several kinetics models. Higher polymeric content in the matrix decreased the release rate of drug. At lower polymeric level, the rate and extent of drug release were enhanced. All the formulations followed Higuchi release kinetics where the Regression co-efficient (R²) values are 0.958, 0.944, and 0.920 for F-1, F-2, and F-3 respectively, and they exhibited diffusion dominated drug release. Statistically significant (P<0.05) differences were found among the drug release profile from different level of polymeric matrices. The release mechanism changed from non-fickian (n=0.489 for F-1) to fickian (n=0.439 and 0.429 for F-2, and F-3 respectively) as a function of decreasing the polymer concentration. The Mean Dissolution Time (MDT) values were increased with the increase in polymer concentration.

scholarly journals Response Surface Optimization of Sustained Release Metformin-Hydrochloride Matrix Tablets: Influence of Some Hydrophillic Polymers on the Release

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Amitava Roy ◽  
Kalpana Roy ◽  
Sarbani Roy ◽  
Jyotirmoy Deb ◽  
Amitava Ghosh ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Dissolution Kinetics ◽  
Matrix Tablets ◽  
Metformin Hydrochloride ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Response Surface Optimization

The aim of the present work was designed to develop a model-sustained release matrix tablet formulation for Metformin hydrochloride using wet granulation technique. In the present study the formulation design was employed to statistically optimize different parameters of Metformin hydrochloride tablets at different drug-to-polymer ratios employing polymers Hydroxypropyl methylcellulose of two grades K4M and K100M as two independent variables whereas the dependent variables studied were X60, X120, T50, T90, n, and b values obtained from dissolution kinetics data. The in vitro drug release studies were carried out at simulated intestinal fluids, and the release showed a non-Fickian anomalous transport mechanism. The drug release was found to reveal zero order kinetics. The granules and the tablets were tested for their normal physical, morphological, and analytical parameters and were found to be within the satisfactory levels. There were no significant drug-polymer interactions as revealed by infrared spectra. It has been found out that on an optimum increased Hydroxypropyl methylcellulose K100M concentration and decreased Hydroxypropyl methylcellulose K4M concentration the formulations were elegant in terms of their release profiles and were found to be statistically significant and generable.

Sign in / Sign up

Export Citation Format

Share Document