scholarly journals PENGARUH PERLAKUAN LEACHING TERHADAP SIFAT MEKANIK FILM LATEKS KARET ALAM BERPENGISI SELULOSA MIKROKRISTAL DARI AMPAS TEBU

2017 ◽  
Vol 5 (4) ◽  
pp. 46-52
Author(s):  
Rismadhani Elita ◽  
Rojiyatul Ikhwani Lubis ◽  
Hamidah Harahap
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Microcrystalline Cellulose ◽  
Natural Rubber Latex ◽  
Latex Film ◽  
Test Results ◽  
Rubber Latex ◽  
Different Temperatures ◽  
Vulcanization Process

Leaching process is one of many factors to raise up the mechanical properties of latex products. Studies on the effect of leaching on film natural rubber latex with the filler microcrystalline cellulose from bagasse with alkanolamide using different temperatures and times vulcanization has been done to produce the better mechanical properties such as strenght tensile and elongation at break. Filming of natural rubber latex is done by coagulants dyeing techniques. The study started with the process of pre-vulcanised natural rubber latex at 70 °C with a loading filler by 0 phr, 5 phr, 10 phr and 15 phr and followed by a vulcanization process at a temperature of 100 °C and 150 °C for 10 minutes and 20 minutes. The film result will be have leaching treatment using a solution of water and ammonia 1%. Test results of tensile strength of natural rubber latex film howed that the tensile strength of natural rubber latex film with microcrystalline cellulose as filler and alkanolamides after leaching less than the tensile strength of natural rubber lateks film before leaching

Mechanical Properties of Natural Rubber and Chloroprene Rubber Latex Blends

2011 ◽  
Vol 239-242 ◽  
pp. 1601-1604 ◽  
Author(s):  
Xiao Xue Liao ◽  
Hai Sheng Tan ◽  
Ming Chao Luo ◽  
Bing Tang ◽  
Shuang Quan Liao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Physical And Mechanical Properties ◽  
Epoxidized Natural Rubber ◽  
Latex Film ◽  
Rubber Latex ◽  
Oil Resistance ◽  
Chloroprene Rubber

The effects of the ratios of natural rubber latex (NRL)and chloroprene rubber latex(CRL) and the type of compatibilizer on physical and mechanical properties of latex film were researched.The oil resistance of vulcanized latex film was tested. The compatibility of the latex blends was also analyzed by TG/DTG method.The results showed that properties of latex film were best when ratio of NRL/CRL was 75/25. As the CRL content increased, oil resistance of latex film was improved. Epoxidized natural rubber latex improved compatibility of NRL and CRL blends.

Optimisation of Tensile Strength and Weight Loss via Taguchi and Response Surface Method for Natural Rubber Latex Film Consisting Cassava Peel as a Bio-Based Filler

2021 ◽  
Vol 02 (01) ◽  
Author(s):  
Mahiratul Husna Mustaffar ◽  
◽  
Aliff Hisyam A. Razak ◽  
Keyword(s):  
Mechanical Properties ◽  
Weight Loss ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Rubber Latex ◽  
Synthetic Rubber ◽  
Surface Method ◽  
Prepared Composite ◽  
Cassava Peel

Disposal latex and synthetic rubber gloves is troublesome such that disposal via incineration and land fill may release poisonous gasses and contaminate soil and water, respectively. As solution to latex and synthetic rubber, biodegradable glove is extensively studied. A bio-based filler is extracted from food waste and blended into natural rubber latex (NRL) as a composite NRL. The effect of biodegradability of composite NRL was studied by varying the loading of bio-based filler in a form of starch dispersion and blended into NRL mixture. Herein some amount of starch can be extracted from cassava peel to be incorporated in NRL for a sustainable and yet biodegradable glove. Previous work on incorporation of cassava-peel filler in NRL has shown a biodegradability without compromising the pristine strength of NRL film at 50% loading starch. In this project, tensile strength and weight loss of prepared composite NRL films were optimised via Taguchi and Response Surface Method (RSM) by means of Design Expert software by varying starch/filler loading, curing temperature and curing drying duration. Due to inadequate data, the optimisation from that previous prepared composite NRL was compared with similar work which utilising NRL and bio-based filler. For Pulungan (2020) study, it can be concluded that the tensile strength of cassava peel starch biodegradable film has the best condition at 50°C to 60°C at approximately 5.5 hours. Elongation optimum conditions shows contrast value of temperature and time. Meanwhile, for Wendy (2020) study, it shows the best percentage loading of cassava-peel starch is at 20% to achieve high stress and strain at break. The optimised mechanical properties via Taguchi and RSM are rather different and hence validation on mechanical properties at above mentioned conditions need to be performed experimentally.

Anti-Microbial and Self-Cleaning of Natural Rubber Latex Gloves by Adding Mangosteen Peel Powder

2018 ◽  
Vol 777 ◽  
pp. 3-7 ◽  
Author(s):  
Wasan Moopayuk ◽  
Nuchnapa Tangboriboon
Keyword(s):  
Tensile Strength ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Film Surface ◽  
Latex Film ◽  
Rubber Latex ◽  
Elongation At Break ◽  
Latex Glove ◽  
Latex Gloves ◽  
Mangosteen Peel

Mangosteen peel powder is one of the most important bio-antioxidants. Adding mangosteen peel powder as filler into natural rubber latex compound for latex glove film formation via dipping process can help the green anti-microbial properties. The physical (smoothness and thickness of film) and mechanical properties (tensile strength and elongation at break) of latex film are still good. Therefore, adding mangosteen peel powder into natural rubber latex gloves can reduce the anti-allergic and antimicrobial on the film surface. Mangosteen peel powder ground by rapid mill is fine particle and high surface area 2.4216 m2/g suitable for homogeneous and compatible for adding into natural rubber latex compound. Ceramic hand mold was dipped into the Ca (NO3)2 coagulant only 3 seconds, then dipped into the natural rubber latex compounds added mangosteen peel powder for 15 seconds, withdrawn hand mold slowly, cured in the oven at 120°C for 30 min, then dried at room temperature, and casted it off the hand mold. The obtained natural latex glove films added mangosteen peel powder are smooth, clear, and thin film surface, the highest elongation at break 803.2711 ± 31.6477%, good tensile strength 30.2933 ± 6.0218 MPa, dense film without water leakage, and good contact angle.

BIO-CACO3 FROM RAW EGGSHELL AS ADDITIVE IN NATURAL RUBBER LATEX GLOVE FILMS

2019 ◽  
Vol 92 (3) ◽  
pp. 558-577
Author(s):  
Nuchnapa Tangboriboon ◽  
Rujika Takkire ◽  
Watchara Sangwan ◽  
Sairung Changkhamchom ◽  
Anuvat Sirivat
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Protein Content ◽  
Natural Rubber Latex ◽  
Film Surface ◽  
Rubber Latex ◽  
Elongation At Break ◽  
Latex Glove ◽  
Low Protein

ABSTRACT Raw hen eggshell powder, a calcium carbonate source, was used as a biofiller in the natural rubber latex compound and latex glove film formation via dipping process. The powder was anticipated to improve the physical (smoothness and thickness of film) and mechanical properties (tensile strength and elongation at break) of latex film and to reduce the extractable protein content on film surface. Eggshell powder ground by a rapid mill was fine particles of approximately 37.48 μm in diameter, suitable for homogeneous and compatible addition into the natural rubber latex compound. Dipping hand mold into the natural rubber latex compound with 50 wt% eggshell added was the best formula to obtain a smooth, clear, thin film surface, with the tensile strength of 23.24 ± 0.745 MPa and the highest elongation at break of 723.99 ± 14.60%, along with a low protein content, a dense film without water leakage, and with a good contact angle. The natural rubber latex glove film possessed good physical-mechanical properties and a low protein content as the results of the raw eggshell powder added as a biofiller.

HAF/SILICA/NANOCLAY “TERNARY” MASTERBATCH AND HAF/SILICA BINARY MASTERBATCH FROM FRESH NATURAL RUBBER LATEX

2014 ◽  
Vol 87 (2) ◽  
pp. 250-263 ◽  
Author(s):  
Sasidharan Krishnan ◽  
Rosamma Alex ◽  
Thomas Kurian
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Carbon Black ◽  
Natural Rubber ◽  
Abrasion Resistance ◽  
Dynamic Properties ◽  
Natural Rubber Latex ◽  
Rubber Latex ◽  
X Ray ◽  
Filler Dispersion

ABSTRACT A process for production of carbon black/silica/nanoclay ternary filler masterbatch from fresh natural rubber (NR) latex was standardized. The fillers, nanoclay, carbon black, and silica were incorporated in fresh NR latex by a modified coagulation process. The latex, mixed with filler dispersions, coagulated immediately on addition of acids. The coagulum containing fillers was dried at 70 °C in an air oven to get the latex filler masterbatch, which was further processed in the conventional way. The masterbatch compounds containing only silica/carbon black showed a higher level of vulcanization as compared with the corresponding dry mixes. The mechanical properties, such as tensile strength, modulus, tear strength, abrasion resistance, and hardness, increased with the proportion of nanoclay in the mixes up to 5 phr, and with a greater amount, the change was only marginal. Lower tan delta values were observed for all of the masterbatches containing nanoclay in the ranges of 3 to 10 phr compared with the control dry mix containing 25/25 carbon black/silica. The improvement in mechanical properties and dynamic properties shown by the masterbatches over the conventional mill-mixed compounds was attributed to factors related to filler dispersion, as evidenced from the data from dispersion analyzer images, X-ray diffractograms, and a higher level of vulcanization.

Direct Reinforcement of Natural Rubber Latex Mixes

1951 ◽  
Vol 24 (3) ◽  
pp. 649-661 ◽  
Author(s):  
Jean Le Bras ◽  
Ivan Piccini
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Operating Conditions ◽  
Rubber Latex ◽  
Resorcinol Formaldehyde ◽  
Molecular Ratio ◽  
Direct Reinforcement ◽  
Lack Of Knowledge

Abstract The direct utilization of latex has up to the present time been limited to a relatively small number of applications because of lack of knowledge of how to communicate to articles sufficient hardness, modulus, resistance to tearing, and resistance to abrasion. It is possible to obtain such properties by combining the molding of latex (thermosensitized by the action of trypsin) with the addition of partially condensed resins. Numerous types of resins can be utilized, but the best results have been obtained by resorcinol-formaldehyde resins. The mechanical properties of vulcanizates thus prepared are extremely high—for example, the tensile strength may reach 7500 pounds per square inch (with an elongation of 700 per cent), and the resistance to tearing 900 pounds per inch. Operating conditions that must be observed for the formation of the resin are described in detail, as well as the influence on the properties of vulcanizates of different factors: length of condensation of the resin, conditions of vulcanization, proportion of catalyst, molecular ratio of constituents, conditions of drying, etc. A new way is opened for obtaining vulcanizates of natural rubber of outstanding mechanical propoerties.

Effect of Aging on Mechanical Properties of Natural Rubber Latex Products Filled with Alkanolamide-Modified Cassava Peel Waste Powder (CPWP)

2015 ◽  
Vol 1123 ◽  
pp. 387-390 ◽  
Author(s):  
Hamidah Harahap ◽  
Adrian Hartanto ◽  
Kelvin Hadinatan ◽  
Indra Surya ◽  
Baharin Azahari
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Tensile Modulus ◽  
Rubber Latex ◽  
Elongation At Break ◽  
Hot Air ◽  
Before And After ◽  
Cassava Peel

The effect of aging on mechanical properties of natural rubber latex (NRL) products filled with alkanolamide-modified cassava peel waste powder (CPWP) was studied. CPWP used as fillers was prepared by milling and sieving it until the size of 100 mesh. The powder then was dispersed in a suspension containing water and alkanolamide in order to modify the prepared powders. The dispersion system of 10 pphr (part per hundred rubber) then was added into NRL matrix followed by pre-vulcanization at 70°C for 10 minutes. The NRL compound then were casted into films by coagulant dipping method then dried at 120°C for 10 minutes. Afterwards, the films were allowed to cool at room temperature for 24 hours before being aged in a circulation of hot air for 24 hours at 70°C. The properties such as tensile strength, tensile modulus, and elongation at break were evaluated between the aged samples and the unaged samples. From this study, it showed that the aged films have increasing value of tensile strength and tensile modulus while the value of elongation at break decreases. These datas are supported by Scanning Electron Microscope (SEM) micrographs which indicate that the change of morphology in NRL films occurs before and after aging.

Reinforcement of Natural Rubber Latex Film by Starch Nanocrystal

2014 ◽  
Vol 543-547 ◽  
pp. 3886-3891 ◽  
Author(s):  
Yang Jian Shu Gao ◽  
Sen Zhao ◽  
Shuang Quan Liao ◽  
Lin Fang ◽  
Zhi Fen Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Acid Hydrolysis ◽  
Mechanical Stability ◽  
Natural Rubber Latex ◽  
Crosslinking Density ◽  
Latex Film ◽  
Latex Films ◽  
Rubber Latex ◽  
Starch Nanocrystals

Starch nanocrystals obtained from acid hydrolysis, and the starch/natural rubber latex film was prepared by blending the starch nanocrystals with natural rubber latex. The latex properties such as viscosity and mechanical stability, water and toluene uptake, crosslinking density and mechanical properties of the latex films were investigated. The results showed that the mechanical stability of natural rubber latex reinforced by starch nanocrystals increased, but the change of viscosity was not obvious. By adding starch nanocrystals in natural rubber latex, the swelling by toluene decreases and the swelling by water increased. The mechanical properties and crosslinking density of films were enhanced with the increase of starch loading.

scholarly journals PENGARUH AGING PADA KEKUATAN TARIK (TENSILE STRENGTH) FILM LATEKS KARET ALAM BERPENGISI NANOKRISTALIN SELULOSA DAN PENYERASI ALKANOLAMIDA

2016 ◽  
Vol 5 (2) ◽  
pp. 27-31
Author(s):  
Marfuah Lubis ◽  
Nuim Hayat ◽  
Hamidah Harahap
Keyword(s):  
Tensile Strength ◽  
Tensile Test ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Aging Treatment ◽  
Nanocrystalline Cellulose ◽  
Latex Film ◽  
Latex Films ◽  
Rubber Latex ◽  
Tensile Test Result

Nanocrystalline cellulose is nano sized filler with high crystallinity and obtanained by hydrolysis of alpha cellulose from sugarcane bagasse. Tensile test of natural rubber latex film filled nanocrystalline cellulose and alkanolamide as compatibilizer after aging treatment have been done. Natural rubber latex films were prepared by coagulant dipping method and followed by vulcanization process at temperature 100 oC and 20 minutes. Aging treatment of natural rubber latex films have done at temperature 70 oC for 24 hours. Tensile test result of natural rubber latex filled nanocrystalline cellulose showed the tensile strength value of aged natural rubber latex film were lower than unaged one. However, tensile strength value of aged natural rubber latex film filled nanocrystalline cellulose modified alkanolamide were higher than unaged film.

Sign in / Sign up

Export Citation Format

Share Document