scholarly journals Longer not stiffer Targeting jute fibre quality

Keyword(s):  
Nature ◽  
1950 ◽  
Vol 165 (4196) ◽  
pp. 516-517 ◽  
Author(s):  
GEORGE W. LANIGAN

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hemalata Jena ◽  
Abinash Panigrahi

Purpose Here, attempts have been made to explore the possible use of Marine waste as filler materials into the bio-fibre composites. Clam shell is a type of marine waste which belongs to the class of Bivalvia. It is mainly made of aragonite crystalline polymorphs. This paper aims to develop a new class of natural fibre composite in which jute fibre as reinforcement, epoxy as matrix and clam shell, as particulate microsphere filler. The study investigates the effects of different amounts of clam shell powder on the kinetics of water absorption of jute fibre-reinforced epoxy composite. Two different environmental conditions at room temperature, i.e. distilled water and seawater, are collected for this purpose. Moisture absorption reduces when clam shell is added to the jute-epoxy composite. The curve of water absorption of jute-epoxy composites with filler loading at both environmental conditions follows as Fickian behaviour. Design/methodology/approach Hand lay-up technique to fabricate the composite – Experimental observation Findings The incorporation of Clam shell filler in jute epoxy composite modified the water absorption property of the composite. Hence the present marine waste is an potential filler in jute fibre reinforced polymer composite. Originality/value The paper demonstrates a new class hybrid composite material which uses a marine waste as important phase in the bio-fibre-reinforced composite. It is a new work submitted for original research paper.


2015 ◽  
Vol 761 ◽  
pp. 531-535
Author(s):  
Noraiham Mohamad ◽  
Mohd Fadli Hassan ◽  
Siang Yee Chang ◽  
Qumrul Ahsan ◽  
Yuhazri Yaakob ◽  
...  

Flexural properties of hybrid glass/jute fibre reinforced epoxy composites were optimised by response surface methodology. The processing parameters of vacuum infusion technique such as supply pressure, soaking time and use of flow media were investigated. The flexural properties of the resulting composites were evaluated using three-point bending test in accordance with the ASTM D790-03 standard. The flexural strength of ~195 MPa and elastic modulus of ~13412 MPa were achieved at optimum parameter of 100 kPa pressure, 120 minutes soaking time with the utilization of flow media during vacuum infusion process.


Wear ◽  
2020 ◽  
Vol 450-451 ◽  
pp. 203274
Author(s):  
Levente Ferenc Tóth ◽  
Jacob Sukumaran ◽  
Gábor Szebényi ◽  
Ádám Kalácska ◽  
Dieter Fauconnier ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document