scholarly journals A Comparison Of Building Envelope Performance Levels Between Ontario, Denmark, Germany And The Passive House Standard, In The Low-Rise, Residential Context

2021 ◽  
Author(s):  
Blaine Attwood
Keyword(s):  
Energy Use ◽  
Building Envelope ◽  
Passive House ◽  
Building Envelopes ◽  
Residential Sector ◽  
Greater Toronto Area ◽  
Residential Context ◽  
Minimum Requirements ◽  
Other World ◽  
House Standard

This research compared and analyzed where the Ontario Building Code rates in the low-rise, residential sector in terms of its: in comparison to Denmark, Germany and the Passive House Standard. This was analyzed to see how Ontario compared against other world renowned energy efficient regulations and where or if there was room for improvement. For this, HOT2000 and THERM were utilized on all four of the reference standards, where both of these programs were managed in a way to compare the results of ‘typical’ building envelopes and the current regulation from each of the standards. These results were then able to provide a whole home’s heating and air conditioning energy use in the Greater Toronto Area climate. Overall, the results illustrated Ontario homes consume the most energy for both typically constructed homes and homes utilizing the minimum requirements. In addition to this, Ontario also had the least performing building envelope connection details. In total, the Passive House performed at the highest level followed by Germany, Denmark and then Ontario.

scholarly journals A Comparison Of Building Envelope Performance Levels Between Ontario, Denmark, Germany And The Passive House Standard, In The Low-Rise, Residential Context

2021 ◽  
Author(s):  
Blaine Attwood
Keyword(s):  
Energy Use ◽  
Building Envelope ◽  
Passive House ◽  
Building Envelopes ◽  
Residential Sector ◽  
Greater Toronto Area ◽  
Residential Context ◽  
Minimum Requirements ◽  
Other World ◽  
House Standard

This research compared and analyzed where the Ontario Building Code rates in the low-rise, residential sector in terms of its: in comparison to Denmark, Germany and the Passive House Standard. This was analyzed to see how Ontario compared against other world renowned energy efficient regulations and where or if there was room for improvement. For this, HOT2000 and THERM were utilized on all four of the reference standards, where both of these programs were managed in a way to compare the results of ‘typical’ building envelopes and the current regulation from each of the standards. These results were then able to provide a whole home’s heating and air conditioning energy use in the Greater Toronto Area climate. Overall, the results illustrated Ontario homes consume the most energy for both typically constructed homes and homes utilizing the minimum requirements. In addition to this, Ontario also had the least performing building envelope connection details. In total, the Passive House performed at the highest level followed by Germany, Denmark and then Ontario.

scholarly journals Investigation of the life cycle carbon impact of passive house building envelopes in Canada

2021 ◽  
Author(s):  
Patrick W. Andres
Keyword(s):  
Life Cycle ◽  
Building Envelope ◽  
Carbon Intensity ◽  
Low Carbon ◽  
Single Family ◽  
Passive House ◽  
Standard Life ◽  
System Configurations ◽  
House Building ◽  
House Standard

Whole building energy and life cycle impact modeling was conducted for a single-family detached reference building designed to meet the Passive House Standard. Life cycle operating global warming potential (GWP) and building envelope embodied GWP were assessed for two mechanical system configurations and three Canadian cities. Variations in regional electricity carbon intensity were found to significantly impact both operating and embodied GWP. Embodied GWP was found to be significant relative to operating GWP in locations with access to low carbon electricity. Additionally, use of natural gas mechanical systems in Edmonton resulted in 360% greater operating emissions than in Montreal, while electric heat pump mechanicals yielded 6,600% higher emissions. Finally, the Passive House Standard method for quantifying operating GWP was found to overestimate emissions by up to 3700% in Montreal and underestimate emissions by 34% in Edmonton, when compared to a method accounting for variations in regional electricity carbon intensity.

scholarly journals Maintenance of Passive House Standard in the Light of Long-Term Study on Energy Use in a Prefabricated Lightweight Passive House in Central Europe

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2801 ◽  
Author(s):  
Krzysztof Wąs ◽  
Jan Radoń ◽  
Agnieszka Sadłowska-Sałęga
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Ventilation System ◽  
Primary Energy ◽  
Operating Conditions ◽  
Design Parameters ◽  
Passive House ◽  
Long Term Study ◽  
House Standard

This article presents the results of experimental research on energy consumption of a prefabricated lightweight passive house located in the south of Poland. The key design parameters of the building were as follows: orientation maximizing heat gains from solar radiation, high thermal insulation of partitions, heat provided by ground source heat pump, and mechanical ventilation system with the heat exchanger. The measurements were performed in normal operating conditions in an inhabited building, throughout the years 2011–2019. For the year 2012, the article also presents the detailed structure of electricity used for particular devices. The objective of the research was to verify whether, in the long term, the building fulfils the energy consumption requirements for passive buildings. The measurements showed that energy consumption for heating was 50% lower than the value required from passive buildings. However, primary energy consumption for the entire building was exceeded already in the second year of research. This was caused by two factors: human behaviors and the type of primary energy source. The research concludes that the maintenance of passive house standard is vulnerable to human impact and difficult in the case of power source characterized by high index of expenditure on non-renewable primary energy. The article also presents recommendations on how to restore the passive house standard in the building.

scholarly journals Application of hourly dynamic method for nZEB buildings in Italian context: analysis and comparisons in national calculation procedure framework

2021 ◽  
Vol 312 ◽  
pp. 02006
Author(s):  
Domenico Palladino ◽  
Domenico Iatauro ◽  
Paolo Signoretti
Keyword(s):  
Energy Use ◽  
Residential Buildings ◽  
Energy Performance ◽  
Building Envelope ◽  
Calculation Procedure ◽  
Reference Case ◽  
Context Analysis ◽  
Minimum Requirements ◽  
Energy Simulations ◽  
Italian Context

The Energy Performance of Buildings Directive (EPBD 2018/844/EU) requires to Member States to upgrade the methodology for the energy performance assessment of buildings. The current calculation method, based on the monthly quasi steady state calculation procedure, could be replaced in the next years by an hourly dynamic calculation procedure (EN ISO 52016), in which a resistance-capacity (RC) model is implemented to consider with more accuracy the heat exchange through the building envelope. In this framework, the present work aims at analysing and comparing the energy needs of three reference case studies of nearly Zero Energy Buildings (nZEB), applying both calculation procedures in order to investigate the main difference of the two approaches. Two residential buildings and one office, compliant with Italian minimum requirements for nZEB, were defined, and several energy simulations were carried out for all different climatic zones of Italian territory. Preliminary results highlighted significant differences of energy need mainly due to different weight of heat loss and heat gains obtained with the two considered calculation methods. This paper represents a preliminary study, but further analysis are recommended in order to evaluate the overall energy use for different type and different operation profile of buildings.

scholarly journals Investigation of the life cycle carbon impact of passive house building envelopes in Canada

2021 ◽  
Author(s):  
Patrick W. Andres
Keyword(s):  
Life Cycle ◽  
Building Envelope ◽  
Carbon Intensity ◽  
Low Carbon ◽  
Single Family ◽  
Passive House ◽  
Standard Life ◽  
System Configurations ◽  
House Building ◽  
House Standard

Whole building energy and life cycle impact modeling was conducted for a single-family detached reference building designed to meet the Passive House Standard. Life cycle operating global warming potential (GWP) and building envelope embodied GWP were assessed for two mechanical system configurations and three Canadian cities. Variations in regional electricity carbon intensity were found to significantly impact both operating and embodied GWP. Embodied GWP was found to be significant relative to operating GWP in locations with access to low carbon electricity. Additionally, use of natural gas mechanical systems in Edmonton resulted in 360% greater operating emissions than in Montreal, while electric heat pump mechanicals yielded 6,600% higher emissions. Finally, the Passive House Standard method for quantifying operating GWP was found to overestimate emissions by up to 3700% in Montreal and underestimate emissions by 34% in Edmonton, when compared to a method accounting for variations in regional electricity carbon intensity.

Impact of Thermal Insulation and Type of Windows on Energy Demand of Buildings with Passive House Standard

2015 ◽  
Vol 725-726 ◽  
pp. 1519-1529
Author(s):  
Milos Knezevic ◽  
Meri Cvetkovska ◽  
Strahinja Trpevski ◽  
Andrej Andreev ◽  
Ana Trombeva Gavriloska ◽  
...  
Keyword(s):  
Energy Demand ◽  
Building Envelope ◽  
Thermal Isolation ◽  
Passive House ◽  
Factors Affecting ◽  
Building Orientation ◽  
Energy Needs ◽  
Basic Parameters ◽  
The Impact ◽  
House Standard

The building orientation and the thickness of the thermal isolation of the building envelope are one of the factors affecting the achievement of the Passive House standard. Other important factors are the windows. For the windows the three basic parameters that influence the achievement of the Passive House standard are: the size of the windows in facade elements, the type of the glass and the type of the window frames. Analysis based on variations of all these parameters give a clear picture of the impact of each of these parameters as well as of their combination on the energy needs of the Passive House. The calculations presented in this paper were based on the methods of thermodynamics, using MKS EN and DIN standards, and the program packages PHPP 2007, HEAT2 and NOVOLIT

EFFECT OF DIFFERENT CLIMATES ON A SHIPPING CONTAINER PASSIVE HOUSE IN CANADA

2019 ◽  
Vol 14 (4) ◽  
pp. 133-153
Author(s):  
Wesley Bowley ◽  
Phalguni Mukhopadhyaya
Keyword(s):  
Energy Demand ◽  
Energy Use ◽  
Minimum Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Arctic Climate ◽  
The Arctic ◽  
Passive House ◽  
Shipping Container ◽  
Passive Houses

Passive House buildings with an annual energy demand of less than 15 kWh/m2a (i.e. kWh/m2 per annum) can help Canada and other countries achieve thermal comfort with minimum energy use and carbon footprint through meticulous design and selection of highly efficient building envelope elements and appliances. Shipping container based passive houses can reduce the cost of passive house construction and also promote recycling. In this paper, a passive house built using shipping containers, originally designed for Victoria, BC, Canada, is analyzed using Passive House Planning Package (PHPP) software in different climactic zones of Canada. The locations under consideration are: Halifax (Cool–Temperate), Toronto (Cold–Temperate), Edmonton (Cold), and Yellowknife (Arctic–Climate). This paper critically examines the energy demand changes in various climate zones and make necessary modifications to the design to achieve passive house energy performance requirements in selected climates. Results show that with modified designs shipping container passive houses can meet passive house requirements, except in the Arctic–Climate of Yellowknife.

Solar-Driven Sorption Chillers for Residential Space Cooling: A Review of Recent Developments and Possible Applications in Canada

2015 ◽  
Author(s):  
Daniel Bowie ◽  
Cynthia A. Cruickshank
Keyword(s):  
High Performance ◽  
Energy Use ◽  
Peak Load ◽  
Internal Heat ◽  
Electricity Grid ◽  
Residential Sector ◽  
Absorption Chillers ◽  
Space Cooling ◽  
Recent Developments ◽  
Advanced Cycles

Energy use for space cooling has increased by 156% from 1990 to 2010 in the Canadian residential sector. In many parts of the country, the increasing use of electrically driven air-conditioners has begun to shift the peak load on the electricity grid from the coldest days of winter to the hottest days of summer. Many of Canada’s major electric utilities providers rely on fossil fuels to generate the additional capacity needed to meet the peak demand, resulting in significant greenhouse gas emissions. Solar-driven sorption chillers remain one of the possible solutions for shaving the peak loads experienced by the electricity grid. This paper presents a review of the recent developments in the research of adsorption and absorption chillers, as well as a comparison of the two technologies based on the latest published experimental results found in the literature. Adsorption chillers continue to evolve in their design, including the use of new consolidated and composite adsorbents, the integration of coated adsorbers into internal heat exchangers, and newly developed advanced cycles for heat and mass recovery. While the physical design of adsorption chillers continues to be advanced, the development of absorption chillers for solar cooling applications has largely been focused on optimizing the system as a whole through improved control strategies and the implementation of newly developed high performance solar collectors. Finally, the paper aims to assess the current state of development of solar-driven sorption chillers to provide insight into their applicability in the Canadian residential sector, as well as the remaining challenges facing this technology.

Sign in / Sign up

Export Citation Format

Share Document