scholarly journals Inelastic Ultimate Load Analysis of Steel Frames Considering Lateral Torsional Buckling Under Distributed Loads

2019 ◽  
Author(s):  
Mutlu Secer ◽  
Ertugrul Turker Uzun
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Steel Frames ◽  
Load Carrying Capacity ◽  
Lateral Torsional Buckling ◽  
Torsional Buckling ◽  
Numerical Examples ◽  
Buckling Behavior ◽  
Load Carrying ◽  
Load Analysis

Contemporary structural design approaches necessitates ways to determine realistic behavior of structures. For this purpose, inelastic ultimate load analysis methods are used widely since strength and stability of whole structure can be represented. In this study, a numerical method is proposed for determining inelastic ultimate load capacity of steel frames considering lateral torsional buckling behavior under distributed loads. In the analyses, inelastic material behavior, second-order effects and residual stresses of the structural frame system and its members are taken into account. Additionally, lateral torsional buckling behavior is considered in the analysis using finite difference method and it is used for determining the structural load carrying capacity of steel frames. Consequently, the problem associated with flexural capacity decreases due to lateral torsional buckling is precisely considered in the load increment steps of inelastic ultimate load analysis. In order to validate the proposed method, numerical examples from the literature are calculated considering the proposed method, AISC 360-16 design specification equations and approaches from the literature. Results of the numerical examples show that lateral torsional buckling is a key issue in determining structural load carrying capacity. Thus, proposed analysis method is shown to be an efficient and consistent tool for inelastic ultimate load analysis.

Modelling and Statistical Approaches to Lateral-Torsional Buckling

2014 ◽  
Vol 969 ◽  
pp. 259-264
Author(s):  
Zdenek Kala ◽  
Jan Valeš
Keyword(s):  
Carrying Capacity ◽  
Limit State ◽  
Random Effect ◽  
Ultimate Limit State ◽  
Load Carrying Capacity ◽  
Lateral Torsional Buckling ◽  
Random Load ◽  
Torsional Buckling ◽  
Load Carrying ◽  
Ultimate Limit

Some particular and selected problems aimed at ultimate limit state and probability-based studies pertaining to lateral-torsional buckling of steel beams are described. Stochastic analysis of the ultimate limit state of a slender member IPE220 under bending was elaborated. The values of non-dimensional slenderness for which the statistical characteristics of random load-carrying capacity are maximal were determined. The stochastic computational model was created in the programme ANSYS. Geometric nonlinear solution was employed. In the conclusion of the article, the question of the random effect of the initial rotation of the cross-section on the load-carrying capacity is discussed.

scholarly journals Experimental Research on Equivalent Rectangular Opening Castellated Beam with Fillet Corner

2020 ◽  
Vol 8 (5) ◽  
pp. 5415-5420
Keyword(s):  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Lateral Torsional Buckling ◽  
Torsional Buckling ◽  
Rectangular Section ◽  
Flexure Mechanism ◽  
Modes Of Failure ◽  
Load Carrying ◽  
Shear Buckling ◽  
Castellated Beam

Nowadays the use of castellated beam has been admired due to its beneficial functions like a light in weight, easy to erect, economical and stronger. The castellated beam is manufactured from its parent solid I beam by cutting it in a zigzag pattern and again joining it by welding so that the depth of the beam increases. Hence, due to an increase in depth of beam load carrying capacity of the parent I section is increased with the same quantity of material and weight. The increase in depth of the castellated beam leads to web post-buckling and lateral-torsional buckling failure when these beams are subjected to loading. There are many other modes of failure like the formation of flexure mechanism, lateral-torsional buckling, and formation of Vierendeel mechanism, rupture of the welded joint in a web post and shear buckling of a web post which needs to be taken care of. Hence, in the present paper, an attempt has been made to evaluate existing literature, concerned with the strength of the beam by providing a rectangular opening and rectangular opening equivalent to diagonal & hexagonal opening with different angles of opening 300 , 450 & 600 . The fillet radius is provided to the corner of the rectangular opening as a result of a 54% increase in the load-carrying capacity of the rectangular section compared to the regular rectangular section.

scholarly journals Experimental Investigation for Non and Partially Composite Cold-Formed Steel Floor Beams

2019 ◽  
Vol 5 (6) ◽  
pp. 1407-1423
Author(s):  
Tuka Mohammed Qasim ◽  
Salah Rohaima Al-Zaidee
Keyword(s):  
Carrying Capacity ◽  
Single Channel ◽  
Composite Model ◽  
Load Carrying Capacity ◽  
Lateral Torsional Buckling ◽  
Torsional Buckling ◽  
Buckling Modes ◽  
The Third ◽  
Load Carrying ◽  
Cold Formed Steel

In this study, six full-scaled models of RC floors supported by cold-form steel sections have been tested. Each model consists of RC 75mm thick slab supported on two parallel cold-formed steel beams with a span of 3m and spacing of 500mm. The slab has an overhang part of 250mm on each side. In the first and fourth models, the slab has been casted directly on the top flanges with no shear connector to simulate the effectiveness of friction in resisting of the lateral-torsional buckling. Shear studs have been drilled in the second and fifth models to ensure the composite action. Finally, the flanges have been embedded for the third and sixth models. A single channel beam is used in the first, second, and third models while a built-up beam is used in the fourth, fifth, and sixth models. Each model has been loaded up to failure under a pure bending with two-line loads located at the third points. Data for loads, deformations, and strains have been gathered. Except the fourth and the sixth models that failed in local buckling modes, all other models failed in global lateral-torsional buckling modes. For the single beam models; the load carrying capacity of the non-composite model is 82.9% less than the capacity of the composite models with shear studs and embedded flange. For the built-up models; the load carrying capacity of the non-composite model is 44.2 % less than the loads of the composite model with shear stud and 48.7% less than the model with the embedded flange.

scholarly journals Strengthening of RCC Beams in Shear by Using SBR Polymer-Modified Ferrocement Jacketing Technique

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Rajinder Ghai ◽  
Prem Pal Bansal ◽  
Maneek Kumar
Keyword(s):  
Carrying Capacity ◽  
Shear Failure ◽  
Ultimate Load ◽  
Load Test ◽  
Wire Mesh ◽  
Styrene Butadiene Rubber ◽  
Shear Load ◽  
Butadiene Rubber ◽  
Load Carrying Capacity ◽  
Load Carrying

There is a common phenomenon of shear failure in RCC beams, especially in old buildings and bridges. Any possible strengthening of such beams is needed to be explored that could strengthen and make them fit for serviceable conditions. The present research has been made to determine the performance of predamaged beams strengthened with three-layered wire mesh polymer-modified ferrocement (PMF) with 15% styrene-butadiene-rubber latex (SBR) polymer. Forty-eight shear-designed and shear-deficient real-size beams were used in this experimental work. Ultimate shear load-carrying capacity of control beams was found at two different shear-span (a/d) ratios 1 and 3. The sets of remaining beams were loaded with different predetermined damage levels of 45%, 75%, and 95% of the ultimate load values and then strengthened with 20 mm thick PMF. The strengthened beams were then again tested for ultimate load-carrying capacity by conducting the shear load test at a/d = 1 and 3. As a result, the PMF-strengthened beams showed restoration and enhancement of ultimate shear load-carrying capacity by 5.90% to 12.03%. The ductility of strengthened beams was improved, and hence, the corresponding deflections were prolonged. On the other hand, the cracking pattern of PMF-strengthened beams was also improved remarkably.

scholarly journals Eigenproblem Versus the Load-Carrying Capacity of Hybrid Thin-Walled Columns with Open Cross-Sections in the Elastic Range

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3468
Author(s):  
Zbigniew Kolakowski ◽  
Andrzej Teter
Keyword(s):  
Cross Sections ◽  
Carrying Capacity ◽  
Ultimate Load ◽  
Equilibrium Path ◽  
Load Carrying Capacity ◽  
Nonlinear Buckling ◽  
Elastic Range ◽  
Load Carrying ◽  
Thin Walled ◽  
Ultimate Load Carrying Capacity

The phenomena that occur during compression of hybrid thin-walled columns with open cross-sections in the elastic range are discussed. Nonlinear buckling problems were solved within Koiter’s approximation theory. A multimodal approach was assumed to investigate an effect of symmetrical and anti-symmetrical buckling modes on the ultimate load-carrying capacity. Detailed simulations were carried out for freely supported columns with a C-section and a top-hat type section of medium lengths. The columns under analysis were made of two layers of isotropic materials characterized by various mechanical properties. The results attained were verified with the finite element method (FEM). The boundary conditions applied in the FEM allowed us to confirm the eigensolutions obtained within Koiter’s theory with very high accuracy. Nonlinear solutions comply within these two approaches for low and medium overloads. To trace the correctness of the solutions, the Riks algorithm, which allows for investigating unsteady paths, was used in the FEM. The results for the ultimate load-carrying capacity obtained within the FEM are higher than those attained with Koiter’s approximation method, but the leap takes place on the identical equilibrium path as the one determined from Koiter’s theory.

Experimental study on the axial compression performance of GFRP-reinforced concrete square columns

2018 ◽  
Vol 22 (7) ◽  
pp. 1554-1565 ◽  
Author(s):  
Jianwei Tu ◽  
Kui Gao ◽  
Lang He ◽  
Xinping Li
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Longitudinal Reinforcement ◽  
Rc Columns ◽  
Compression Performance ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Ultimate Load Carrying Capacity

At present, extensive studies have been conducted relative to the topic of fiber-reinforced polymer(FRP)- reinforced concrete (RC) flexural members, and many design methods have also been introduced. There have, however, been few studies conducted on the topic of FRP-RC compression members. In light of this, eight glass-fiber-reinforced polymer (GFRP)-RC square columns (200×200×600 mm) were tested in order to investigate their axial compression performance. These columns were reinforced with GFRP longitudinal reinforcement and confined GFRP stirrup. These experiments investigated the effects of the longitudinal reinforcement ratio, stirrup configuration (spirals versus hoops) and spacing on the load-carrying capacity and failure modes of GFRP-RC rectangular columns. The test results indicate that the load-carrying capacity of longitudinal GFRP bars accounted for 3%-7% of the ultimate load-carrying capacity of the columns. The ultimate load-carrying capacity of RC columns confined with GFRP spirals increased by 0.8%-1.6% with higher ductility, compared to GFRP hoops. Reducing the stirrup spacing may prevent the buckling failure of the longitudinal bars and increase the ductility and load-carrying capacity of the GFRP-RC columns. It has been found that setting the GFRP compressive strength to 35% of the GFRP maximum tensile strength yields a reasonable estimate of ultimate load-carrying capacity of GFRP-RC columns.

Structural Performance of Fiber-Reinforced Polymer Honeycomb Sandwich Panels: Evaluation of Size Effect and Wrap Strengthening

2003 ◽  
Vol 1845 (1) ◽  
pp. 191-199 ◽  
Author(s):  
Ondrej Kalny ◽  
Robert J. Peterman ◽  
Guillermo Ramirez ◽  
C. S. Cai ◽  
Dave Meggers
Keyword(s):  
Carrying Capacity ◽  
Ultimate Load ◽  
Sandwich Panels ◽  
Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Flexural Capacity ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Honeycomb Sandwich ◽  
Ultimate Load Carrying Capacity

Stiffness and ultimate load-carrying capacities of glass fiber-reinforced polymer honeycomb sandwich panels used in bridge applications were evaluated. Eleven full-scale panels with cross-section depths ranging from 6 to 31.5 in. (152 to 800 mm) have been tested to date. The effect of width-to-depth ratio on unit stiffness was found to be insignificant for panels with a width-to-depth ratio between 1 and 5. The effect of this ratio on the ultimate flexural capacity is uncertain because of the erratic nature of core-face bond failures. A simple analytical formula for bending and shear stiffness, based on material properties and geometry of transformed sections, was found to predict service-load deflections within 15% accuracy. Although some factors influencing the ultimate load-carrying capacity were clearly identified in this study, a reliable analytical prediction of the ultimate flexural capacity was not attained. This is because failures occur in the bond material between the outer faces and core, and there are significant variations in bond properties at this point due to the wet lay-up process, even for theoretically identical specimens. The use of external wrap layers may be used to shift the ultimate point of failure from the bond (resin) material to the glass fibers. Wrap serves to strengthen the relatively weak core–face interface and is believed to bring more consistency in determining the ultimate load-carrying capacity.

Load-Carrying Capacity of Second-Growth Douglas-Fir Stump Anchors

1987 ◽  
Vol 2 (3) ◽  
pp. 77-80 ◽  
Author(s):  
Marvin R. Pyles ◽  
Joan Stoupa
Keyword(s):  
Carrying Capacity ◽  
Deformation Behavior ◽  
Ultimate Load ◽  
Douglas Fir ◽  
Load Carrying Capacity ◽  
Test Results ◽  
Tree Diameter ◽  
Second Growth ◽  
Load Carrying ◽  
Load Tests

Abstract In order to quantify the stump anchor capacity of small second-growth Douglas-fir (Pseudotsuga menziesii [Mirb]. Franco) trees, load tests to failure were conducted on 18 stumps from trees 7 to 16.5 in dbh. The tests produced ultimate loads that varied as the square of the tree diameter. However, the ultimate load typically occurred at stump system deformations that were far in excess of that which would be considered failure of a stump anchor. A hyperbolic equation was used to describe the load-deformation behavior of each stump tested and was generalized to describe all the test results. West. J. Appl. For. 2(3):72-80, July 1987.

Sign in / Sign up

Export Citation Format

Share Document