scholarly journals Functional Relationship Between Grain Yield and Spikes Per Square Meter of Wheat as Influenced by Seed Rate Under Late Sown Condition

2020 ◽  
Vol 22 (1) ◽  
pp. 105-113
Author(s):  
MAK Mian ◽  
AA Begum ◽  
RR Saha
Keyword(s):  
Grain Yield ◽  
Functional Relationship ◽  
Agricultural Research ◽  
Maximum Yield ◽  
Functional Model ◽  
Research Field ◽  
Agricultural Research Institute ◽  
Seed Rate ◽  
Average Value ◽  
Good Consistency

An experiment was conducted at Agronomy Research Field of Bangladesh Agricultural Research Institute, Gazipur for five consecutive years (2014-2015 to 2018-2019) to establish a functional relationship between grain yield and spikes/m2 of wheat at late sown condition. Variation of spikes/m2 was created by five seed rates (90, 120, 150, 180  and 210 kg/ha). Pooled average value of spikes / m2 was observed the highest (479-506) in 180-210 kg seed /ha. From the structural treatment, the highest grain yield (pooled average of 3876-4153 kg/ha ranged 3295-5028 kg/ha) of wheat was produced in the seed rate of 150-180 kg/ha. The estimated optimum seed rate was found 162.29 kg/ha with the estimated grain yield 3989 kg/ha of wheat at late sown condition through the developed function model of Y=485.91+43.17X-0.133X2 (R2=0.87). Again, the estimate optimum spikes/m2 was noticed 423 when the estimated grain yield of wheat was 4135 kg/ha at late sown condition through the developed functional model of Y=-2837+32.98X-0.039X2 (R2=0.83). The grain yield would be increased about 13% as compared to recommended seed rate (120 kg/ha) of wheat. Spikes / m2 had significant positive correlation with seed rate (r=0.79 at p=0.05) of wheat. Relationship between observed grain yield and predicted grain yield (when relationship between spikes/m2 and grain yield) showed a good consistency (Y=1.0006X, R2=0.94 and r = 0.97 at p<0.01). From the results of the study it is concluded that 162 kg/ha of seed rate and 423 spikes / m2 would be optimum for maximum yield) 4135 kg/ha) of wheat at late sown condition. Bangladesh Agron. J. 2019, 22(1): 105-113

scholarly journals Plant population is the function of grain yield of maize

2021 ◽  
pp. 103-107
Author(s):  
Mian MAK ◽  
Kakon SS ◽  
Zannat ST ◽  
Begum AA
Keyword(s):  
Population Density ◽  
Grain Yield ◽  
Functional Relationship ◽  
Functional Model ◽  
Plant Population ◽  
Rabi Season ◽  
Area Index ◽  
Good Consistency ◽  
Plant Population Density ◽  
Hybrid Maize

A field experiment on hybrid maize with different plant population density was conducted at the Agronomy field of BARI, Joydebpur, Gazipur during the consecutive rabi season of 2019-2020 and 2020-2021. Five plant population density viz; T1= 66666 plants/ha (75cm × 20cm spacing: 6.67 plants/m2), T2= 83333 plants/ha (60cm × 20cm spacing:8.33 plants/m2), T3=100000 plants/ha (50cm × 20cm spacing:10 plants/m2), T4=125000 plants/ha (40cm × 20cm spacing:12.5 plants/m2) and T5=166666 plants/ha (30cm × 20cm spacing:16.67 plants/m2) were used in the experiment. LAI (leaf area index) and TDM (total dry matter) increased with the increase of plant population, those influenced grain yield of maize. The highest grain yield (10.12-10.78 t/ha) was recorded in T3 (100000 plants/ha) and the lowest (5.02-5.33t/ha) in T5 (166666 plants/ha) treatment. Functional relationship between plant population and grain yield of maize was established as Y = 2.0795x-0.1067x2; (R² = 0.92). The effect of plant population on the grain yield of maize could be explained 92% by the functional model. The co- efficient indicated that increase of one plant/m2 would increase grain yield at the rate of 2.0795 t/ha up to a certain limit. The estimated optimum plant population was 9.74 plants/m2 (974000 plants/ha) through functional model. Then the predicted maximum grain yield would be 10.13 t/ha at that optimum plant population of 9.74 plants/m2 (974000 plants/ha). There existed a good consistency between observed and predicted grain yield of maize (r=0.96 at p<0.01 and R2=0.97; using the developed functional model).

scholarly journals Effect of Sowing Dates on the Yield of Sunflower

2015 ◽  
Vol 18 (1) ◽  
pp. 1-5 ◽  
Author(s):  
Bulbul Ahmed ◽  
Mousumi Sultana ◽  
Jesmin Zaman ◽  
Santos Kumar Paul ◽  
Md Mokhlesur Rahman ◽  
...  
Keyword(s):  
Agricultural Research ◽  
Maximum Yield ◽  
Sowing Date ◽  
Research Field ◽  
Research Station ◽  
Rabi Season ◽  
Agricultural Research Institute ◽  
Seed Formation ◽  
Yield Attributes ◽  
Sowing Dates

The experiment was carried out at Agronomy Research field of Bangladesh Agricultural Research Institute (BARI), Joydebpur, Gazipur and Regional Agricultural Research Station, Hathazari, Chittagong to find out optimum sowing date of sunflower during rabi season 2012-13. The sunflower var. BARI Surjomukhi-2 was used. Five sowing dates; 10 November, 20 November, 30 November, 10 December and 20 December were tested. It was revealed that yield and yield attributes of sunflower were significantly influenced by sowing dates. The maximum plant height (172.13 cm), head diameter (18.33), weight of seed / per head (66 g), 1000- seed weight (68 g) and yield (2.5 t ha?1) were obtained from 20 November sowing. The lowest yield (1.83 t ha?1) was obtained from 20 December sowing. The 20 November sowing received the higher duration for maturity (127 days), first flowering (57 days) and seed formation (20 days) while 20 December sowing showed shorter duration for maturity, first flowering and seed formation of 119, 54 and 14 days respectively. It was concluded that the 20 November sowing would be the optimum time of sowing for achieving maximum yield of sunflower.Bangladesh Agron. J. 2015, 18(1): 1-5

scholarly journals Intercropping Squash with Maize under Varying Planting System

2019 ◽  
Vol 21 (2) ◽  
pp. 19-24
Author(s):  
JA Chowdhury ◽  
SS Kakon ◽  
AA Begum ◽  
MAK Mian
Keyword(s):  
Grain Yield ◽  
Agricultural Research ◽  
Research Field ◽  
Agricultural Research Institute ◽  
Gross Margin ◽  
Economic Return ◽  
Sole Crop ◽  
Hybrid Maize ◽  
Equivalent Yield ◽  
Planting System

The experiment was conducted at the research field of Agronomy Division, Bangladesh Agricultural Research Institute (BARI), Joydebpur, Gazipur during rabi seasons of 2014-15 and 2015-16 to find out the suitable planting arrangement of squash (var. Bulam House) with maize (var. BARI Hybrid maize-9) as intercropping for higher productivity and economic return. Seven treatment combinations viz. maize normal plating (75 cm Í 25 cm), maize normal plating (75 cm Í 25 cm) (100%) + 1 row squash (Plant to Plant 80 cm) (116%), maize paired row (37.5 cm Í 150 cm Í 37.5 cm) (100%) + 1 row squash (Plant to Plant 80 cm) (50%), maize paired row (100%) + 1 row squash (Plant to Plant 100 cm) (40%), maize paired row (100%) + 2 rows squash (Plant to Plant 80 cm) (100%), maize paired row (100%) + 2 rows squash (80%) (Plant to Plant 100 cm) and sole Squash (100 cm × 80 cm) were tested. Results showed that the highest grain yield of maize (9.47 t ha-1 in 2014-15 and 9.24 t ha-1 in 2015-16) and squash yield (28.19 t ha-1 in 2014-15 and 25.02 t ha-1 in 2015-16) were recorded in sole crop, respectively. Maximum mean maize equivalent yield (19.39 t ha-1) was recorded in maize paired row (100%) + 2 row squash (Plant to Plant 80 cm) (100%) combination in both the year. The highest gross return (Tk. 2,93,850 ha-1), gross margin (Tk. 1,92,450 ha-1) and BCR (2.95) were also obtained from the same combinations. Two years’ results revealed that maize paired row + 2 rows squash (Plant to Plant 80 cm) combination could be suitable for higher productivity and economic return. Bangladesh Agron. J. 2018, 21(2): 19-24

scholarly journals System Productivity of Potato + Maize Intercropping as Affected by Sowing Date

2017 ◽  
Vol 19 (2) ◽  
pp. 11-20
Author(s):  
AA Begum ◽  
MSU Bhuiya ◽  
SMA Hossain ◽  
Amina Khatun ◽  
SK Das ◽  
...  
Keyword(s):  
Agricultural Research ◽  
Maximum Yield ◽  
Sowing Date ◽  
Research Field ◽  
Agricultural Research Institute ◽  
Sowing Time ◽  
System Productivity ◽  
Monetary Return ◽  
Hybrid Maize ◽  
Equivalent Yield

The experiment was conducted at Agronomy Research Field, Bangladesh Agricultural Research Institute (BARI), Gazipur during 2009-2010 to find out suitable sowing time of maize in potato + maize intercropping for maximum yield and economic return. Treatments of the experiment were: T1= Simultaneous sowing (SS) of potato and hybrid maize (HM), T2= SS of potato and composite maize (CM), T3= HM sown 10 days after potato planting (DAPP), T4= CM sown 10 DAPP, T5= HM sown 20 DAPP, T6= CM sown 20 DAPP, T7= HM sown 30 DAPP, T8= CM sown 30 DAPP, T9= HM sown 40 DAPP, T10 = CM sown 40 DAPP, T11= Sole potato, T12= Sole HM and T13= Sole CM. The result revealed that sole potato and maize produced the highest yield, LAI, TDM and CGR. The HM showed better performance than CM. The highest equivalent yield a monetary return indicated that potato + HM sown 30 DAPP intercropping was the most productive and profitable.Bangladesh Agron. J. 2016 19(2): 11-20

scholarly journals Effect of planting system of potato and plant density of maize on productivity of potato- hybrid maize intercropping system

2016 ◽  
Vol 41 (3) ◽  
pp. 397-409
Author(s):  
AA Begum ◽  
MSU Bhuiya ◽  
SMA Hossain ◽  
Amina Khatun ◽  
SK Das
Keyword(s):  
Plant Density ◽  
Agricultural Research ◽  
Maximum Yield ◽  
Growth Yield ◽  
Research Field ◽  
Economic Return ◽  
Single Row ◽  
Hybrid Maize ◽  
Planting System ◽  
Better Than

The experiment was conducted at Agronomy Research Field, Bangladesh Agricultural Research Institute, Gazipur during 2010-11 to find out the appropriate planting system of potato and plant density of maize in potatohybrid maize intercropping system for maximum yield and economic return. Ten treatments were evaluated viz., T1= Potato whole tuber single row (75 cm × 20 cm) + 125% hybrid maize (75 cm × 20 cm), T2=Potato whole tuber single row (75 cm × 20 cm) + 100% hybrid maize (75cm × 25 cm), T3= Potato whole tuber single row (75 cm × 20 cm) + 83% hybrid maize (75 cm × 30 cm), T4= Potato half tuber paired row (20 cm/ 55 cm × 20 cm) + 125% hybrid maize (75 cm × 20 cm), T5= Potato half tuber paired row (20 cm/ 55 cm × 20 cm) +100% hybrid maize (75 cm × 25 cm), T6= Potato half tuber paired row (20 cm/ 55 cm × 20 cm) + 83% hybrid maize (75 cm × 30 cm), T7= Sole potato whole tuber single row planting system (60 cm × 25 cm), T8 = Sole potato half tuber paired row (20 cm/ 55 cm × 20 cm), T9= Sole hybrid maize in normal spacing 75 cm × 25 cm (sole HM1) and T10= Sole hybrid maize (75 cm × 25 cm) sown 30 days after potato planting (sole HM2). The results revealed that sole planting of both potato and maize produced the maximum yields. In case of sole potato, potato half tuber paired row planting system was better than potato whole tuber single row planting system. On the other hand, the performance of sole HM1 was better than sole HM2 in relation to growth, yield and economic performance. Over all T1 treatment ( potato whole tuber single row planting system with 125 % hybrid maize population) was the best intercropping system for getting higher yield and economic return as well as less relative crowding coefficient with better crop performance ratio.Bangladesh J. Agril. Res. 41(3): 397-409, September 2016

scholarly journals Effects of nitrogen and potassium on growth and yield of gladiolus corms

2013 ◽  
Vol 37 (4) ◽  
pp. 607-616 ◽  
Author(s):  
FN Khan ◽  
MM Rahman ◽  
AJMS Karim ◽  
KM Hossain
Keyword(s):  
Agricultural Research ◽  
Research Field ◽  
Growth And Yield ◽  
Research Centre ◽  
Treatment Combination ◽  
Agricultural Research Institute ◽  
Maximum Percentage ◽  
Optimum Rate ◽  
Plant Emergence ◽  
Research Institute

A study was conducted at the Floriculture Research Field of Horticulture Research Centre of Bangladesh Agricultural Research Institute (BARI) during the period from November 2006 to May 2008 to determine the optimum rate of N and K for better growth and yield of corm and cormel of gladiolus. The treatment combination N150 K200 kg/ha produced the longest plant (42.1 cm), the broadest leaf (1.93 cm), the maximum percentage of spikes (88.1%), and corm (97.6%), the heaviest and the largest corm (19.5 g and 4.11 cm, respectively), cent percent flowering sized corm, and the highest corm number and cormel yield (1,20,000 and 1.66 t/ha, respectively). The corm produced from this treatment combination also showed better performances in the next year in respect of plant emergence (100%), florets/spike (13.1), spike and rachis length (82.2 cm and 45.4 cm, respectively), flower stick weight (57.1 g) and percentage of flower sticks (113%). DOI: http://dx.doi.org/10.3329/bjar.v37i4.14385 Bangladesh J. Agril. Res. 37(4): 607-616, December 2012

scholarly journals Effect of conservation agriculture on grain yield and income of maize under maize based cropping system in far western Nepal

2018 ◽  
Vol 10 (4) ◽  
pp. 320-332
Author(s):  
H.K. Prasai ◽  
S.K. Sah ◽  
A.K. Gautam ◽  
A.P. Regmi
Keyword(s):  
Grain Yield ◽  
Agricultural Research ◽  
Cropping Systems ◽  
Cropping System ◽  
Conservation Agriculture ◽  
Research Field ◽  
Research Station ◽  
Net Benefit ◽  
Maize Varieties ◽  
Hybrid Maize

Abstract. The adoption of Conservation agriculture (CA) contributes to sustainable production and its advantages include lower inputs and stable yields. This study was conducted in the research field of Regional Agricultural Research Station, Bhagetada, Dipayal, Doti during 2014 and 2015 to identify the effect of CA on grain yield and income of maize in Maize based cropping system. Both conservation and conventional agricultural (ConvA) practices were evaluated on two maize based cropping systems namely maize-wheat-mungbean (M-W-MB) and maize-lentil-mungbean (M-L-MB). For this purpose two maize varieties namely Raj Kumar and Arun-2 were used. The average productivity of maize under M-L-MB cropping system was 1.6% higher (5.75 t/ha) than M-W-MB cropping system (5.66 t/ha). The average grain yield of maize under CA was 16.7% higher (6.15 t/ha) than ConvA (5.27 t/ha). Rajkumar produced 43% higher average grain yield (6.73 t/ha) than Arun-2 variety (4.69 t/ha). The average net benefit was slightly higher (US$ 597.33/ha) under M-L-MB cropping system than M-W-MB cropping system (US$ 573.89/ha). Similarly, the average net benefit from CA was 102% higher (US$ 783.67/ha) than ConvA (US$ 386.79/ha). Rajkumar variety gave 127% higher average net benefit (US$ 813.49/ha) than Arun-2 (US$ 357.81/ha). The average benefit - cost (B:C) ratio of M-L-MB cropping system was slightly higher (1.72) than the average B:C ratio of M-W-MB cropping system (1.70). The average B:C ratio of CA was 42% higher (2.01) than ConvA (1.41). The average B:C ratio of Rajkumar variety was found 33% higher (1.95) than Arun-2 (1.46). The higher grain yield, net profit and B:C ratio were found in CA practices under M-L-MB cropping system and Rajkumar variety. This study suggests that hybrid maize planting and the adoption of M-L-MB cropping system should be used to increase grain yield and economic performance under CA practices.

scholarly journals Nutrient uptake and yield of onion as influenced by nitrogen and sulphur fertilization

2008 ◽  
Vol 32 (3) ◽  
pp. 413-420 ◽  
Author(s):  
S Nasreen ◽  
MM Haque ◽  
MA Hossain ◽  
ATM Farid
Keyword(s):  
Yield Components ◽  
Agricultural Research ◽  
Block Design ◽  
Antagonistic Effect ◽  
Research Field ◽  
Agricultural Research Institute ◽  
Combined Application ◽  
S Uptake ◽  
Randomized Complete Block Design ◽  
Number Of Leaves

The effect of nitrogen (0, 80, 120, and 160 kg/ha from urea) and sulphur (0, 20, 40, and 60 kg/ha from gypsum) fertilization on N and S uptake and yield performance of onion (var. BARI Piaz-1) was studied in the research field of Bangladesh Agricultural Research Institute (BARI), Joydebpur, Gazipur during rabi seasons of 2002-2003 and 2003-2004. The experiment was laid out in a randomized complete block design under factorial arrangement with three replications. Addition of nitrogen and sulphur fertilizers exerted significant influence on the number of leaves/plant, plant height, diameter of bulb, single bulb weight, and yield of onion. The uptake of N and S by bulb also significantly responded to the application of nitrogen and sulphur. The highest yield of onion and the maximum uptake of N and S were recorded by the combined application of 120 kg N and 40 kg S/ha with a blanket dose of 90 kg P2O5, 90 kg K2O, and 5 kg Zn/ha plus 5 tons of cowdung/ha. The antagonistic effect of nitrogen and sulphur on the uptake of N and S by bulb, yield components, and yield of onion was observed only when they were applied together at higher rates of nitrogen (160 kg/ha) and sulphur (40kg/ha). DOI: http://dx.doi.org/10.3329/bjar.v32i3.543Bangladesh J. Agril. Res. 32(3) : 413-420, September 2007

scholarly journals Flowering Behaviour and Seed Yield of French Bean as Affected by Variety

2015 ◽  
Vol 3 (3) ◽  
pp. 483-489
Author(s):  
S.S. Kakon ◽  
M.S.U. Bhuiya ◽  
S.M.A. Hossain ◽  
N. Sultana
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Maximum Yield ◽  
French Bean ◽  
Strongly Correlated ◽  
Agricultural Research Institute ◽  
Flowering Pattern ◽  
Flowering Behaviour ◽  
Floral Abscission ◽  
Research Institute

The effect of flowering pattern and floral abscission on the yield and yield attributed characters of French bean varieties were studied in a field of Bangladesh Agricultural Research Institute, Gazipur. There nine varieties were treated- (1) BARI Jharsheem-1 (2) BARI Jharsheem-2 (3) Sylhet local-1 (4) Sylhet local-2 (5) Sylhet local-3 (6) Sylhet local-4 (7) Sylhet local-5 (8) Sylhet local-6 and (9) Sylhet local-7. Among the treatments, the highest number of flower was recorded within 5 to 8 days in BARI Jharsheem-2 although, the maximum flower opened within 5 to 8 days and following ceased within 15 to 20 days after first flowering. The total number of flowers per plant varied between 19.36 to 45.06 and 22.0 to 47.20 in two consecutive years while percentage of pod abscission varied between 70.53 to 82.26 and 73.46 to 80.75 in two consecutive years. The maximum yield of French bean was obtained from BARI Jharsheem-1, however identical yield was obtained from BARI Jharsheem-2 treatment. The flowering pattern and percent abscission as well greater number of pod were found to be the influential character for the highest yield of French bean. In addition, seed yield was strongly correlated to the number of opened flowers as well as number of mature pods.  Int J Appl Sci Biotechnol, Vol 3(3): 483-489

Yield performance of Boro rice through integrated application of vermicompost, biochar and urea

2020 ◽  
Vol 26 (1) ◽  
pp. 2151-2158
Author(s):  
A. A. Alvi ◽  
F. A. Tumpa ◽  
K. Hossen ◽  
B. Hossain
Keyword(s):  
Grain Yield ◽  
Agricultural Research ◽  
Rice Yield ◽  
Block Design ◽  
Research Field ◽  
Growth And Yield ◽  
Yield Performance ◽  
Straw Yield ◽  
Randomized Complete Block Design ◽  
Boro Rice

The present investigation was executed at Agricultural Research Field, Noakahali Science and Technology University, Noakhali, Bangladesh to access the effects of variety and integrated application of vermicompost, biochar and urea on efficiency of boro rice yield. The experiment was accomplished during the period from November 2018 to May 2019. It was completed in a randomized complete block design (RCBD) with three replications. The treatments assigned in a factorial arrangement of 2 × 4, with 2 varieties of rice (V1-BINA dhan 8, V2- BINA dhan 10) and 4 integration of vermicompost, biochar, and urea (T1: Vermicompost-2.5 t ha-1, T2: Vermicompost-2 t ha-1+ Biochar 0.5 t ha-1, T3: Vermicompost-1.5 t ha-1+ Biochar 1 t ha-1 and T4: Vermicompost-1.5 t ha-1 + Urea-150kg ha-1/0.15 t ha-1). Data were collected to analyze growth and yield contributing characters of boro rice. All the parameters were not statistically significant to differ. According to variety highest grain (3.73 t ha-1) and straw (2.8 t ha-1) yield was found from BINA dhan 10 in comparison with BINA dhan 8. In case of integrated application of vermicompost, biochar and urea, superior grain and straw yield were obtained from T4: Vermicompost-1.5 t ha-1 + Urea-0.15 t ha-1 whereas lowest grain yield (3.01 t ha-1 recorded from integrated application vermicompost and biochar. In combine maximum grain (4.92 t ha-1) and straw (4.40 t ha-1) yield was noted from BINA dhan 10 alone with integrated application of vermicompost and urea whereas the lowest data (grain: 2.50 t ha-1; straw: 1.64 t ha-1) was found from BINA dhan 8 along with vermicompost and biochar.

Sign in / Sign up

Export Citation Format

Share Document