Kontrol Lengan Robot Badminton dan Analisis Kinematika

2020 ◽  
Vol 2 (2) ◽  
pp. 72
Author(s):  
Handika Dwi Cahyono ◽  
Indrazno Siradjuddin ◽  
Budhy Setiawan
Keyword(s):  
Robot Manipulator ◽  
Tuning Parameter ◽  
End Effector ◽  
Set Point ◽  
Proportional Integral

Lengan robot manipulator adalah suatu sistem mekanik yang digunakan dalam memanipulasi pergerakan mengangkat, memindahkan, dan memanipulasi benda kerja untuk meringankan kerja manusia. Lengan robot dalam penelitian ini memanipulasi gerakan memukul shuttlecock seperti pada permainan badminton. Model kinematika merepresentasikan hubungan end effector dalam ruang tiga dimensi dengan variabel sendi dalam ruang sendi. Metode Denavit-Harternberg merupakan sebuah metode yang digunakan untuk membentuk persamaan kinematik yang menggunakan 4 parameter yaitu θ, α, d dan a. Hasil dari penelitian ini didapat persamaan kinematik maju dan kinematik balik yang dapat digunakan sebagai acuan dalam memprogram gerakan lengan robot ke dalam sistem control.Agar Gerakan lengan robot stabil, maka dibutuhkan kontroller PID (Proportional, Integral, dan Differensial) untuk mengontrol kecepatan motor pada lengan robot. Pada penelitian ini mengimplementasikan metode Ziegler-Nichols untuk mendapatkan parameter  PID (KP, KI dan KD). Hasil pengujian tuning parameter PID menggunakan metode Ziegler-Nichols didapatkan nilai KP=0,92, KI=4,11 dan KD=0,03. Dengan menggunakan parameter tersebut kecepatan motor menjadi lebih stabil mendekati set point.

scholarly journals Rancang Bangun Prototipe Sistem Otomatisasi Pengereman Elektromagnetik Berbasis Mikrokontroler Dengan Kontrol PID

2018 ◽  
Vol 2 (01) ◽  
pp. 41-50
Author(s):  
Mohammad Hafiz Hersyah
Keyword(s):  
Tuning Parameter ◽  
Trial And Error ◽  
Proportional Integral Derivative ◽  
Set Point ◽  
Proportional Integral

Sistem otomatisasi pengereman diperlukan untuk mempermudah manusia melakukan pekerjaannya dalam pengereman saat berkendara. Tugas Akhir ini bertujuan untuk merancang dan membangun sebuah sistem pengereman elektromagnetik otomatis yang mampu membuat mobil berhenti sebelum menabrak penghalang dengan menerapkan metode kontrol Proportional Integral Derivative (PID). Untuk mengetahui seberapa efektif pemanfaatan kontrol PID dalam melakukan otomatisasi pengereman elektromagnetik maka akan dibandingkan dengan hasil pengereman tanpa menggunakan PID. Penentuan hasil tuning parameter kontroler PID didapatkan dengan menggunakan metode trial and error dan didapatkan nilai parameter PID yang cocok Kp = 2.98, Ki = 0.104 dan Kd = 1.35. Sensor Ultrasonik digunakan sebagai pendeteksi jarak ke penghalang. Dari hasil pengujian sistem pengereman elektromagnetik dengan kontrol PID lebih efektif digunakan jika dibandingkan dengan sistem pengereman elektromagnetik tanpa PID karena dapat dilihat dari sisi berhentinya mobil  mendekati set point, pengereman elektromagnetik dengan kontrol PID lebih bagus  hasilnya jika dibandingkan dengan pengereman elektromagnetik tanpa kontrol PID.

scholarly journals A Novel Kinematically Redundant Planar Parallel Robot Manipulator With Full Rotatability

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
Nicholas Baron ◽  
Andrew Philippides ◽  
Nicolas Rojas
Keyword(s):  
Potential Application ◽  
Robot Manipulator ◽  
Video Recording ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Geometric Method ◽  
Forward Kinematics ◽  
Online Video ◽  
End Effector ◽  
Moving Platform

This paper presents a novel kinematically redundant planar parallel robot manipulator, which has full rotatability. The proposed robot manipulator has an architecture that corresponds to a fundamental truss, meaning that it does not contain internal rigid structures when the actuators are locked. This also implies that its rigidity is not inherited from more general architectures or resulting from the combination of other fundamental structures. The introduced topology is a departure from the standard 3-RPR (or 3-RRR) mechanism on which most kinematically redundant planar parallel robot manipulators are based. The robot manipulator consists of a moving platform that is connected to the base via two RRR legs and connected to a ternary link, which is joined to the base by a passive revolute joint, via two other RRR legs. The resulting robot mechanism is kinematically redundant, being able to avoid the production of singularities and having unlimited rotational capability. The inverse and forward kinematics analyses of this novel robot manipulator are derived using distance-based techniques, and the singularity analysis is performed using a geometric method based on the properties of instantaneous centers of rotation. An example robot mechanism is analyzed numerically and physically tested; and a test trajectory where the end effector completes a full cycle rotation is reported. A link to an online video recording of such a capability, along with the avoidance of singularities and a potential application, is also provided.

scholarly journals A New Approach to the Solution of Robot Kinematics Based on Relative Transformation Matrices

2016 ◽  
Vol 5 (3) ◽  
pp. 213
Author(s):  
Mohammad Reza Elhami ◽  
Iman Dashti
Keyword(s):  
Robot Manipulator ◽  
Robot Kinematics ◽  
Coordinate Frame ◽  
End Effector ◽  
New Approach ◽  
Transformation Matrices ◽  
The World ◽  
Convenient Approach ◽  
Position And Orientation ◽  
Relative Transformation

In analyzing robot manipulator kinematics, we need to describe relative movement of adjacent linkages or joints in order to obtain the pose of end effector (both position and orientation) in reference coordinate frame. Denavit-Hartenberg established a method based on a 4×4 homogenous matrix so called “A” matrix. This method used by most of the authors for kinematics and dynamic analysis of the robot manipulators. Although it has many advantages, however, finding the elements of this matrix and link/joint’s parameters is sometimes complicated and confusing. By considering these difficulties, the authors proposed a new approach called ‘convenient approach’ that is developed based on “Relative Transformations Principle”. It provides a very simple and convenient way for the solution of robot kinematics compared to the conventional D-H representation. In order to clarify this point, the kinematics of the world known Stanford manipulator has been solved through D-H representation as well as convenient approach and the results are compared.

Dynamic modeling, system identification and comparative study of various control strategies for a spatial parallel manipulator

2021 ◽  
pp. 095965182110320
Author(s):  
Mervin Joe Thomas ◽  
Shoby George ◽  
Deepak Sreedharan ◽  
ML Joy ◽  
AP Sudheer
Keyword(s):  
Real Time ◽  
Parallel Manipulator ◽  
Control Strategies ◽  
Proportional Integral Derivative ◽  
Real Time Control ◽  
Model Predictive Controller ◽  
End Effector ◽  
Proportional Integral ◽  
Time Control ◽  
Predictive Controller

The significant challenges seen with the mathematical modeling and control of spatial parallel manipulators are its difficulty in the kinematic formulation and the inability to real-time control. The analytical approaches for the determination of the kinematic solutions are computationally expensive. This is due to the passive joints, solvability issues with non-linear equations, and inherent kinematic constraints within the manipulator architecture. Therefore, this article concentrates on an artificial neural network–based system identification approach to resolve the complexities of mathematical formulations. Moreover, the low computation time with neural networks adds up to its advantage of real-time control. Besides, this article compares the performance of a constant gain proportional–integral–derivative (PID), variable gain proportional–integral–derivative, model predictive controller, and a cascade controller with combined variable proportional–integral–derivative and model predictive controller for real-time tracking of the end-effector. The control strategies are simulated on the Simulink model of a 6-degree-of-freedom 3-PPSS (P—prismatic; S—spherical) parallel manipulator. The simulation and real-time experiments performed on the fabricated manipulator prototype indicate that the proposed cascade controller with position and velocity compensation is an appropriate method for accurate tracking along the desired path. Also, training the network using the experimentally generated data set incorporates the mechanical joint approximations and link deformities present in the fabricated model into the predicted results. In addition, this article showcases the application of Euler–Lagrangian formalism on the 3-PPSS parallel manipulator for its dynamic model incorporating the system constraints. The Lagrangian multipliers include the influence of the constraint forces acting on the manipulator platform. For completeness, the analytical model results have been verified using ADAMS for a pre-defined end-effector trajectory.

scholarly journals A novel solution of inverse kinematic for 6R robot manipulator with offset joint based on screw theory

2020 ◽  
Vol 17 (3) ◽  
pp. 172988142092564
Author(s):  
Zhiwei Liao ◽  
Gedong Jiang ◽  
Fei Zhao ◽  
Xuesong Mei ◽  
Yang Yue
Keyword(s):  
Joint Angle ◽  
Screw Theory ◽  
Robot Manipulator ◽  
Inverse Kinematic ◽  
Transformation Matrix ◽  
Inverse Kinematic Problem ◽  
End Effector ◽  
Closed Form Solutions ◽  
Specific Configuration ◽  
Kinematic Approach

This article proposes a novel inverse kinematic approach with translation transformation matrix based on screw theory to solve the inverse kinematic problem for 6R robot manipulator with offset joint. The translation transformation matrix is introduced to convert the 6R robot manipulator with offset joint to a new configuration with intersecting axes, and the mapping relationship from the end effector to the joint angle is established along with the Paden–Kahan subproblems. The eight closed solutions of the specific configuration are deduced, which automatically eliminate the singularity solutions. Moreover, the precision and efficiency of the proposed method are verified through a numerical example. Unlike other approaches, the presented algorithm not only inherits the superior accuracy of the other geometric approaches but also exhibits an outperform efficiency. Finally, the method is generalized to other 6R robots, which has closed-form solutions to further verify its versatility. The presented study provides some basis for further investigations, such as trajectory planning and motion control, which provides a new tool on the analysis and application of this kind of robot manipulator.

A hybrid impedance control scheme for underwater welding robots with a passive foundation in the controller domain

SIMULATION ◽  
2017 ◽  
Vol 93 (7) ◽  
pp. 619-630 ◽  
Author(s):  
Sunil Kumar ◽  
Vikas Rastogi ◽  
Pardeep Gupta
Keyword(s):  
Minimum Distance ◽  
Position Control ◽  
Robot Manipulator ◽  
Impedance Control ◽  
Graph Model ◽  
Proportional Integral Derivative ◽  
End Effector ◽  
Flexible Arm ◽  
Control Scheme ◽  
Effective Stability

A hybrid impedance control scheme for the force and position control of an end-effector is presented in this paper. The interaction of the end-effector is controlled using a passive foundation with compensation gain. For obtaining the steady state, a proportional–integral–derivative controller is tuned with an impedance controller. The hybrid impedance controller is implemented on a terrestrial (ground) single-arm robot manipulator. The modeling is done by creating a bond graph model and efficacy is substantiated through simulation results. Further, the hybrid impedance control scheme is applied on a two-link flexible arm underwater robot manipulator for welding applications. Underwater conditions, such as hydrodynamic forces, buoyancy forces, and other disturbances, are considered in the modeling. During interaction, the minimum distance from the virtual wall is maintained. A simulation study is carried out, which reveals some effective stability of the system.

Micro/Macro or Link-Integrated Micro-actuator Manipulation—A Kinematics and Dynamics Perspective

2006 ◽  
Vol 129 (10) ◽  
pp. 1086-1093 ◽  
Author(s):  
J. Zhang ◽  
J. Rastegar
Keyword(s):  
Dynamic Response ◽  
Closed Loop ◽  
Robot Manipulator ◽  
Robot Manipulators ◽  
High Harmonic ◽  
Kinematics And Dynamics ◽  
Control Problems ◽  
End Effector ◽  
Micro Actuators ◽  
And Control

Smart (active) materials based actuators, hereinafter called micro-actuators, have been shown to be well suited for the elimination of high harmonics in joint and/or end-effector motions of robot manipulators and in the reduction of actuator dynamic response requirements. Low harmonic joint and end-effector motions, as well as low actuator dynamic response requirements, are essential for a robot manipulator to achieve high operating speed and precision with minimal vibration and control problems. Micro-actuators may be positioned at the end-effector to obtain a micro- and macro-robot manipulation configuration. Alternatively, micro-actuators may be integrated into the structure of the links to vary their kinematics parameters, such as their lengths during the motion. In this paper, the kinematics and dynamics consequences of each of the aforementioned alternative are studied for manipulators with serial and closed-loop chains. It is shown that for robot manipulators constructed with closed-loop chains, the high harmonic components of all joint motions can be eliminated only when micro-actuators are integrated into the structure of the closed-loop chain links. The latter configuration is also shown to have dynamics advantage over micro- and macro-manipulator configuration by reducing the potential vibration and control problems at high operating speeds. The conclusions reached in this study also apply to closed-loop chains of parallel and cooperating robot manipulators.

scholarly journals Online pose correction of an industrial robot using an optical coordinate measure machine system

2018 ◽  
Vol 15 (4) ◽  
pp. 172988141878791 ◽  
Author(s):  
Sepehr Gharaaty ◽  
Tingting Shu ◽  
Ahmed Joubair ◽  
Wen Fang Xie ◽  
Ilian A Bonev
Keyword(s):  
Root Mean Square ◽  
Spot Welding ◽  
Industrial Robot ◽  
Industrial Robots ◽  
Mean Square ◽  
End Effector ◽  
Proportional Integral ◽  
Accuracy Requirement ◽  
Robot Controller ◽  
Correction Scheme

In this article, a dynamic pose correction scheme is proposed to enhance the pose accuracy of industrial robots. The dynamic pose correction scheme uses the dynamic pose measurements as feedback to accurately guide the robot end-effector to the desired pose. The pose is measured online with an optical coordinate measure machine, that is, C-Track 780 from Creaform. A root mean square method is proposed to filter the noise from the pose measurements. The dynamic pose correction scheme adopts proportional-integral-derivaitve controller and generates commands to the FANUC robot controller. The developed dynamic pose correction scheme has been tested on two industrial robots, FANUC LR Mate 200iC and FANUC M20iA. The experimental results on both robots demonstrate that the robots can reach the desired pose with an accuracy of ±0.050 mm for position and ±0.050° for orientation. As a result, the developed pose correction can make the industrial robots meet higher accuracy requirement in the applications such as riveting, drilling, and spot welding.

scholarly journals Hybrid Mutation Fruit Fly Optimization Algorithm for Solving the Inverse Kinematics of a Redundant Robot Manipulator

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jianping Shi ◽  
Yuting Mao ◽  
Peishen Li ◽  
Guoping Liu ◽  
Peng Liu ◽  
...  
Keyword(s):  
Optimization Algorithm ◽  
Inverse Kinematics ◽  
Robot Manipulator ◽  
Fruit Fly ◽  
Fruit Fly Optimization Algorithm ◽  
Redundant Manipulators ◽  
End Effector ◽  
Redundant Robot ◽  
Fruit Fly Optimization ◽  
Inverse Kinematics Problem

The inverse kinematics of redundant manipulators is one of the most important and complicated problems in robotics. Simultaneously, it is also the basis for motion control, trajectory planning, and dynamics analysis of redundant manipulators. Taking the minimum pose error of the end-effector as the optimization objective, a fitness function was constructed. Thus, the inverse kinematics problem of the redundant manipulator can be transformed into an equivalent optimization problem, and it can be solved using a swarm intelligence optimization algorithm. Therefore, an improved fruit fly optimization algorithm, namely, the hybrid mutation fruit fly optimization algorithm (HMFOA), was presented in this work for solving the inverse kinematics of a redundant robot manipulator. An olfactory search based on multiple mutation strategies and a visual search based on the dynamic real-time updates were adopted in HMFOA. The former has a good balance between exploration and exploitation, which can effectively solve the premature convergence problem of the fruit fly optimization algorithm (FOA). The latter makes full use of the successful search experience of each fruit fly and can improve the convergence speed of the algorithm. The feasibility and effectiveness of HMFOA were verified by using 8 benchmark functions. Finally, the HMFOA was tested on a 7-degree-of-freedom (7-DOF) manipulator. Then the results were compared with other algorithms such as FOA, LGMS-FOA, AE-LGMS-FOA, IFOA, and SFOA. The pose error of end-effector corresponding to the optimal inverse solution of HMFOA is 10−14 mm, while the pose errors obtained by FOA, LGMS-FOA, AE-LGMS-FOA, IFOA, and SFOA are 102 mm, 10−1 mm, 10−2 mm, 102 mm, and 102 mm, respectively. The experimental results show that HMFOA can be used to solve the inverse kinematics problem of redundant manipulators effectively.

Sign in / Sign up

Export Citation Format

Share Document