scholarly journals Evaluation of Remote Mapping Techniques for Earthquake-Triggered Landslide Inventories in an Urban Subarctic Environment: A Case Study of the 2018 Anchorage, Alaska Earthquake

2021 ◽  
Vol 9 ◽  
Author(s):  
S. N. Martinez ◽  
L. N. Schaefer ◽  
K. E. Allstadt ◽  
E. M. Thompson
Keyword(s):  
Remote Sensing ◽  
Urban Areas ◽  
Vegetation Index ◽  
Remote Sensing Data ◽  
Remotely Sensed ◽  
Individual Performance ◽  
Field Observations ◽  
Sensing Data ◽  
Remote Mapping ◽  
Alaska Earthquake

Earthquake-induced landslide inventories can be generated using field observations but doing so can be challenging if the affected landscape is large or inaccessible after an earthquake. Remote sensing data can be used to help overcome these limitations. The effectiveness of remotely sensed data to produce landslide inventories, however, is dependent on a variety of factors, such as the extent of coverage, timing, and data quality, as well as environmental factors such as atmospheric interference (e.g., clouds, water vapor) or snow and vegetation cover. With these challenges in mind, we use a combination of field observations and remote sensing data from multispectral, light detection and ranging (lidar), and synthetic aperture radar (SAR) sensors to produce a ground failure inventory for the urban areas affected by the 2018 magnitude (Mw) 7.1 Anchorage, Alaska earthquake. The earthquake occurred during late November at high latitude (∼61°N), and the lack of sunlight, persistent cloud cover, and snow cover that occurred after the earthquake made remote mapping challenging for this event. Despite these challenges, 43 landslides were manually mapped and classified using a combination of the datasets mentioned previously. Using this manually compiled inventory, we investigate the individual performance and reliability of three remote sensing techniques in this environment not typically hospitable to remotely sensed mapping. We found that differencing pre- and post-event normalized difference vegetation index maps and lidar worked best for identifying soil slumps and rapid soil flows, but not as well for small soil slides, soil block slides and rock falls. The SAR-based methods did not work well for identifying any landslide types because of high noise levels likely related to snow. Some landslides, especially those that resulted in minor surface displacement, were identifiable only from the field observations. This work highlights the importance of the rapid collection of field observations and provides guidance for future mappers on which techniques, or combination of techniques, will be most effective at remotely mapping landslides in a subarctic and urban environment.

scholarly journals RANDOM-FOREST-ENSEMBLE-BASED CLASSIFICATION OF HIGH-RESOLUTION REMOTE SENSING IMAGES AND NDSM OVER URBAN AREAS

2017 ◽  
Vol XLII-2/W7 ◽  
pp. 887-892
Author(s):  
X. F. Sun ◽  
X. G. Lin
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Random Forest ◽  
Urban Areas ◽  
Vegetation Index ◽  
Conditional Random Field ◽  
Remote Sensing Data ◽  
Intermediate Step ◽  
Sensing Data ◽  
3D Geometry

As an intermediate step between raw remote sensing data and digital urban maps, remote sensing data classification has been a challenging and long-standing research problem in the community of remote sensing. In this work, an effective classification method is proposed for classifying high-resolution remote sensing data over urban areas. Starting from high resolution multi-spectral images and 3D geometry data, our method proceeds in three main stages: feature extraction, classification, and classified result refinement. First, we extract color, vegetation index and texture features from the multi-spectral image and compute the height, elevation texture and differential morphological profile (DMP) features from the 3D geometry data. Then in the classification stage, multiple random forest (RF) classifiers are trained separately, then combined to form a RF ensemble to estimate each sample’s category probabilities. Finally the probabilities along with the feature importance indicator outputted by RF ensemble are used to construct a fully connected conditional random field (FCCRF) graph model, by which the classification results are refined through mean-field based statistical inference. Experiments on the ISPRS Semantic Labeling Contest dataset show that our proposed 3-stage method achieves 86.9% overall accuracy on the test data.

Effect of Slope Mesorelief on the Spatial Variability of Soil Properties and Vegetation Index Based on Remote Sensing Data

2019 ◽  
Vol 55 (9) ◽  
pp. 1329-1337
Author(s):  
N. V. Gopp ◽  
T. V. Nechaeva ◽  
O. A. Savenkov ◽  
N. V. Smirnova ◽  
V. V. Smirnov
Keyword(s):  
Remote Sensing ◽  
Spatial Variability ◽  
Soil Properties ◽  
Vegetation Index ◽  
Remote Sensing Data ◽  
Sensing Data

scholarly journals Detecting Forest Degradation in the Three-North Forest Shelterbelt in China from Multi-Scale Satellite Images

2021 ◽  
Vol 13 (6) ◽  
pp. 1131
Author(s):  
Tao Yu ◽  
Pengju Liu ◽  
Qiang Zhang ◽  
Yi Ren ◽  
Jingning Yao
Keyword(s):  
Remote Sensing ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Net Primary Production ◽  
Remote Sensing Data ◽  
Forest Degradation ◽  
Observation Data ◽  
Area Index ◽  
Sensing Data ◽  
Multi Scale

Detecting forest degradation from satellite observation data is of great significance in revealing the process of decreasing forest quality and giving a better understanding of regional or global carbon emissions and their feedbacks with climate changes. In this paper, a quick and applicable approach was developed for monitoring forest degradation in the Three-North Forest Shelterbelt in China from multi-scale remote sensing data. Firstly, Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Ratio Vegetation Index (RVI), Leaf Area Index (LAI), Fraction of Photosynthetically Active Radiation (FPAR) and Net Primary Production (NPP) from remote sensing data were selected as the indicators to describe forest degradation. Then multi-scale forest degradation maps were obtained by adopting a new classification method using time series MODerate Resolution Imaging Spectroradiometer (MODIS) and Landsat Enhanced Thematic Mapper Plus (ETM+) images, and were validated with ground survey data. At last, the criteria and indicators for monitoring forest degradation from remote sensing data were discussed, and the uncertainly of the method was analyzed. Results of this paper indicated that multi-scale remote sensing data have great potential in detecting regional forest degradation.

scholarly journals Estimation of the temperature distribution in urban areas by using remote sensing data.

1994 ◽  
Vol 22 ◽  
pp. 267-273 ◽  
Author(s):  
Shinji KANEKO ◽  
Toshiie MAEDA ◽  
Takahito UENO ◽  
Hidefumi IMURA
Keyword(s):  
Remote Sensing ◽  
Temperature Distribution ◽  
Urban Areas ◽  
Remote Sensing Data ◽  
Sensing Data

scholarly journals Remote Sensing Approaches and Related Techniques to Map and Study Landslides

2020 ◽  
Author(s):  
Ram L. Ray ◽  
Maurizio Lazzari ◽  
Tolulope Olutimehin
Keyword(s):  
Remote Sensing ◽  
Hazard Assessment ◽  
Remote Sensing Data ◽  
Remotely Sensed ◽  
Landslide Monitoring ◽  
In Situ Observation ◽  
Remotely Sensed Data ◽  
Sensing Data ◽  
Stability Model

Landslide is one of the costliest and fatal geological hazards, threatening and influencing the socioeconomic conditions in many countries globally. Remote sensing approaches are widely used in landslide studies. Landslide threats can also be investigated through slope stability model, susceptibility mapping, hazard assessment, risk analysis, and other methods. Although it is possible to conduct landslide studies using in-situ observation, it is time-consuming, expensive, and sometimes challenging to collect data at inaccessible terrains. Remote sensing data can be used in landslide monitoring, mapping, hazard prediction and assessment, and other investigations. The primary goal of this chapter is to review the existing remote sensing approaches and techniques used to study landslides and explore the possibilities of potential remote sensing tools that can effectively be used in landslide studies in the future. This chapter also provides critical and comprehensive reviews of landslide studies focus¬ing on the role played by remote sensing data and approaches in landslide hazard assessment. Further, the reviews discuss the application of remotely sensed products for landslide detection, mapping, prediction, and evaluation around the world. This systematic review may contribute to better understanding the extensive use of remotely sensed data and spatial analysis techniques to conduct landslide studies at a range of scales.

scholarly journals Methods of calculating landslide volume using remote sensing data

2020 ◽  
Vol 149 ◽  
pp. 02009
Author(s):  
Maira Razakova ◽  
Alexandr Kuzmin ◽  
Igor Fedorov ◽  
Rustam Yergaliev ◽  
Zharas Ainakulov
Keyword(s):  
Remote Sensing ◽  
Sea Level ◽  
Remote Sensing Data ◽  
Field Studies ◽  
Aerial Photographs ◽  
Field Observations ◽  
Sensing Data ◽  
Quantitative Estimates ◽  
Landslide Volume ◽  
Engineering Protection

The paper considers the issues of calculating the volume of the landslide from remote sensing data. The main methods of obtaining information during research are field observations. The most important results of field studies are quantitative estimates, such as the volume of the embankment resulting from a landslide, morphometric indicators, etc. The study of a remote and remote object was carried out by remote methods using aerial photographs in the Ile Alatau foothills at 1,600 meters above sea level. The obtained materials from the mudflow survey will be useful in developing solutions to mitigate the effects of disasters and in the design of measures for engineering protection from landslides.

Have vehicle emissions of primary NO2 peaked?

2016 ◽  
Vol 189 ◽  
pp. 439-454 ◽  
Author(s):  
David C. Carslaw ◽  
Tim P. Murrells ◽  
Jon Andersson ◽  
Matthew Keenan
Keyword(s):  
Remote Sensing ◽  
Urban Areas ◽  
Vehicle Emissions ◽  
Remote Sensing Data ◽  
Vehicle Emission ◽  
Oxides Of Nitrogen ◽  
Vehicle Exhaust ◽  
Road Vehicles ◽  
Limit Values ◽  
Sensing Data

Reducing ambient concentrations of nitrogen dioxide (NO2) remains a key challenge across many European urban areas, particularly close to roads. This challenge mostly relates to the lack of reduction in emissions of oxides of nitrogen (NOx) from diesel road vehicles relative to the reductions expected through increasingly stringent vehicle emissions legislation. However, a key component of near-road concentrations of NO2 derives from directly emitted (primary) NO2 from diesel vehicles. It is well-established that the proportion of NO2 (i.e. the NO2/NOx ratio) in vehicle exhaust has increased over the past decade as a result of vehicle after-treatment technologies that oxidise carbon monoxide and hydrocarbons and generate NO2 to aid the emissions control of diesel particulate. In this work we bring together an analysis of ambient NOx and NO2 measurements with comprehensive vehicle emission remote sensing data obtained in London to better understand recent trends in the NO2/NOx ratio from road vehicles. We show that there is evidence that NO2 concentrations have decreased since around 2010 despite less evidence of a reduction in total NOx. The decrease is shown to be driven by relatively large reductions in the amount of NO2 directly emitted by vehicles; from around 25 vol% in 2010 to 15 vol% in 2014 in inner London, for example. The analysis of NOx and NO2 vehicle emission remote sensing data shows that these reductions have been mostly driven by reduced NO2/NOx emission ratios from heavy duty vehicles and buses rather than light duty vehicles. However, there is also evidence from the analysis of Euro 4 and 5 diesel passenger cars that as vehicles age the NO2/NOx ratio decreases. For example the NO2/NOx ratio decreased from 29.5 ± 2.0% in Euro 5 diesel cars up to one year old to 22.7 ± 2.5% for four-year old vehicles. At some roadside locations the reductions in primary NO2 have had a large effect on reducing both the annual mean and number of hourly exceedances of the European Limit Values of NO2.

Sign in / Sign up

Export Citation Format

Share Document