scholarly journals Influence of a Post-dam Sediment Pulse and Post-fire Debris Flows on Steelhead Spawning Gravel in the Carmel River, California

2021 ◽  
Vol 9 ◽  
Author(s):  
Douglas P. Smith ◽  
Jamie Schnieders ◽  
Lauren Marshall ◽  
Katherine Melchor ◽  
Skylar Wolfe ◽  
...  
Keyword(s):  
Debris Flows ◽  
Limiting Factor ◽  
Central California ◽  
Bathymetric Data ◽  
Successful Recovery ◽  
Fire Debris ◽  
Dam Site ◽  
High Flows ◽  
Particle Counts ◽  
Bed Material

Spawning gravel scarcity is a limiting factor for successful recovery of federally-threatened anadromous fish like steelhead of central California. A BACI-experimental design using bed particle counts from 2013 through 2021 shows that spawning-sized gravel (32–90 mm) diminished downstream of the former San Clemente Dam site in 2017, following dam removal in 2015. High flows in 2017 transported a pulse of sand and fine-gravel that filled pools and runs throughout the river below the dam. The bed material in the 3 km closest to the dam remained too coarse for redds in riffles and too fine in pools and runs. Time-series bathymetric data of the Los Padres Dam reservoir located in the upper Carmel watershed shows that nearly all bed material (including spawning gravel) in the upper Carmel River watershed was recruited during wet winters that immediately followed expansive wildfires. We studied that effect in detail following the Carmel Fire of August 2020, which preconditioned the slopes adjacent to the Carmel River for debris flows. Our analysis of several fire-mediated debris flows in 2021 show that they contained virtually no mud and held approximately 45% spawning-sized gravel. Although the debris flows contained abundant spawning gravel, and several flow snouts terminated in the Carmel River, the material was dispersed downstream rather than forming bars and patches that could be used for steelhead nest building. The generally small volume of material in the flows relative to the size of the river channel and impediments to debris flow runout limited the contribution of spawning-size gravel to the river.

Observations and Analyses of the 9 January 2018 Debris-Flow Disaster, Santa Barbara County, California

2021 ◽  
Vol 27 (1) ◽  
pp. 3-27
Author(s):  
Jeremy T. Lancaster ◽  
Brian J. Swanson ◽  
Stefani G. Lukashov ◽  
Nina S. Oakley ◽  
Jacob B. Lee ◽  
...  
Keyword(s):  
Debris Flow ◽  
Debris Flows ◽  
Extreme Rainfall ◽  
Atmospheric Conditions ◽  
Santa Barbara ◽  
Debris Removal ◽  
Fire Debris ◽  
Santa Barbara County ◽  
Coastal Land

ABSTRACT The post–Thomas Fire debris flows of 9 January 2018 killed 23 people, damaged 558 structures, and caused severe damage to infrastructure in Montecito and Carpinteria, CA. U.S. Highway 101 was closed for 13 days, significantly impacting transportation and commerce in the region. A narrow cold frontal rain band generated extreme rainfall rates within the western burn area, triggering runoff-driven debris flows that inundated 5.6 km2 of coastal land in eastern Santa Barbara County. Collectively, this series of debris flows is comparable in magnitude to the largest documented post-fire debris flows in the state and cost over a billion dollars in debris removal and damages to homes and infrastructure. This study summarizes observations and analyses on the extent and magnitude of inundation areas, debris-flow velocity and volume, and sources of debris-flow material on the south flank of the Santa Ynez Mountains. Additionally, we describe the atmospheric conditions that generated intense rainfall and use precipitation data to compare debris-flow source areas with spatially associated peak 15 minute rainfall amounts. We then couple the physical characterization of the event with a compilation of debris-flow damages to summarize economic impacts.

scholarly journals The Development of a 1-D Integrated Hydro-Mechanical Model Based on Flume Tests to Unravel Different Hydrological Triggering Processes of Debris Flows

Water ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 950 ◽  
Author(s):  
Theo van Asch ◽  
Bin Yu ◽  
Wei Hu
Keyword(s):  
Debris Flow ◽  
Mechanical Model ◽  
Debris Flows ◽  
Overland Flow ◽  
Slope Angle ◽  
Great Influence ◽  
Flume Experiments ◽  
Triggering Mechanisms ◽  
Bed Material ◽  
Triggering Process

Many studies which try to analyze conditions for debris flow development ignore the type of initiation. Therefore, this paper deals with the following questions: What type of hydro-mechanical triggering mechanisms for debris flows can we distinguish in upstream channels of debris flow prone gullies? Which are the main parameters controlling the type and temporal sequence of these triggering processes, and what is their influence on the meteorological thresholds for debris flow initiation? A series of laboratory experiments were carried out in a flume 8 m long and with a width of 0.3 m to detect the conditions for different types of triggering mechanisms. The flume experiments show a sequence of hydrological processes triggering debris flows, namely erosion and transport by intensive overland flow and by infiltrating water causing failure of channel bed material. On the basis of these experiments, an integrated hydro-mechanical model was developed, which describes Hortonian and saturation overland flow, maximum sediment transport, through flow and failure of bed material. The model was calibrated and validated using process indicator values measured during the experiments in the flume. Virtual model simulations carried out in a schematic hypothetical source area of a catchment show that slope angle and hydraulic conductivity of the bed material determine the type and sequence of these triggering processes. It was also clearly demonstrated that the type of hydrological triggering process and the influencing geometrical and hydro-mechanical parameters may have a great influence on rainfall intensity-duration threshold curves for the start of debris flows.

scholarly journals An 1-D Integrated Hydro-Mechanical Model to Unravel Different Hydrological Triggering Processes of Debris Flows

2018 ◽  
Author(s):  
Theo W.J. van Asch ◽  
Bin Yu ◽  
Wei Hu
Keyword(s):  
Mechanical Model ◽  
Debris Flows ◽  
Overland Flow ◽  
Model Simulation ◽  
Slope Angle ◽  
Great Influence ◽  
Source Area ◽  
Material Model ◽  
Flume Experiments ◽  
Bed Material

Many studies, which try to analyze the meteorological threshold conditions for debris flows ignore the type of initiation. This paper focuses on the differences in hydrological triggering processes of debris flows in channel beds of the source areas. The different triggering processes were studied in the laboratory and by model simulation on the field scale. The laboratory experiments were carried out in a flume, 8 m long and a width of 0.3 m. An integrated hydro-mechanical model was developed, describing Hortonian and Saturation overland flow, through flow, maximum sediment transport and failure of bed material. The model was tested on the processes observed in the flume. The flume experiments show a sequence of hydrological processes triggering debris flows, namely erosion and transport by intensive overland flow and by infiltrating water causing failure of channel bed material. Model simulations carried out on a schematic hypothetical source area of a catchment show that the type and sequence of these triggering processes are determined by slope angle and the hydraulic conductivity of the bed material. It was also clearly demonstrated that the type of initiation process and the geometrical and hydro-mechanical parameters may have a great influence on rainfall intensity-duration threshold curves, indicating the start of debris flows.

scholarly journals Inundation, flow dynamics, and damage in the 9 January 2018 Montecito debris-flow event, California, USA: Opportunities and challenges for post-wildfire risk assessment

Geosphere ◽  
2019 ◽  
Vol 15 (4) ◽  
pp. 1140-1163 ◽  
Author(s):  
J.W. Kean ◽  
D.M. Staley ◽  
J.T. Lancaster ◽  
F.K. Rengers ◽  
B.J. Swanson ◽  
...  
Keyword(s):  
Debris Flow ◽  
Debris Flows ◽  
Field Measurements ◽  
Economic Loss ◽  
Flow Dynamics ◽  
Dynamic Constraints ◽  
Fire Debris ◽  
Velocity Information ◽  
Intense Burst ◽  
Comprehensive Framework

Abstract Shortly before the beginning of the 2017–2018 winter rainy season, one of the largest fires in California (USA) history (Thomas fire) substantially increased the susceptibility of steep slopes in Santa Barbara and Ventura Counties to debris flows. On 9 January 2018, before the fire was fully contained, an intense burst of rain fell on the portion of the burn area above Montecito, California. The rainfall and associated runoff triggered a series of debris flows that mobilized ∼680,000 m3 of sediment (including boulders >6 m in diameter) at velocities up to 4 m/s down coalescing urbanized alluvial fans. The resulting destruction (including 23 fatalities, at least 167 injuries, and 408 damaged homes) underscores the need for improved understanding of debris-flow runout in the built environment, and the need for a comprehensive framework to assess the potential loss from debris flows following wildfire. We present observations of the inundation, debris-flow dynamics, and damage from the event. The data include field measurements of flow depth and deposit characteristics made within the first 12 days after the event (before ephemeral features of the deposits were lost to recovery operations); an inventory of building damage; estimates of flow velocity; information on flow timing; soil-hydrologic properties; and post-event imagery and lidar. Together, these data provide rare spatial and dynamic constraints for testing debris-flow runout models, which are needed for advancing post-fire debris-flow hazard assessments. Our analysis also outlines a framework for translating the results of these models into estimates of economic loss based on an adaptation of the U.S. Federal Emergency Management Agency’s Hazus model for tsunamis.

Objective definition of rainfall intensity–duration thresholds for the initiation of post-fire debris flows in southern California

Landslides ◽  
2012 ◽  
Vol 10 (5) ◽  
pp. 547-562 ◽  
Author(s):  
Dennis M. Staley ◽  
Jason W. Kean ◽  
Susan H. Cannon ◽  
Kevin M. Schmidt ◽  
Jayme L. Laber
Keyword(s):  
Debris Flows ◽  
Southern California ◽  
Rainfall Intensity ◽  
Fire Debris ◽  
Definition Of

Is aridity a high-order control on the hydro–geomorphic response of burned landscapes?

2016 ◽  
Vol 25 (3) ◽  
pp. 262 ◽  
Author(s):  
Gary J. Sheridan ◽  
Petter Nyman ◽  
Christoph Langhans ◽  
Jane Cawson ◽  
Philip J. Noske ◽  
...  
Keyword(s):  
Debris Flows ◽  
Scale Parameter ◽  
Landscape Scale ◽  
High Order ◽  
Net Radiation ◽  
Erosion Rates ◽  
Geomorphic Response ◽  
Eastern Australia ◽  
Fire Debris

Fire can result in hydro–geomorphic changes that are spatially variable and difficult to predict. In this research note we compile 294 infiltration measurements and 10 other soil, catchment runoff and erosion datasets from the eastern Victorian uplands in south-eastern Australia and argue that higher aridity (a function of the long-term mean precipitation and net radiation) is associated with lower post-fire infiltration capacities, increasing the chance of surface runoff and strongly increasing the chance of debris flows. Post-fire debris flows were only observed in the more arid locations within the Victorian uplands, and resulted in erosion rates more than two orders of magnitude greater than non-debris flow processes. We therefore argue that aridity is a high-order control on the magnitude of post-wildfire hydro–geomorphic processes. Aridity is a landscape-scale parameter that is mappable at a high resolution and therefore is a useful predictor of the spatial variability of the magnitude of post-fire hydro–geomorphic responses.

Minimizing economic impacts from post-fire debris flows in the western United States

2016 ◽  
Vol 83 (1) ◽  
pp. 149-176 ◽  
Author(s):  
Kevin McCoy ◽  
Vitaliy Krasko ◽  
Paul Santi ◽  
Daniel Kaffine ◽  
Steffen Rebennack
Keyword(s):  
United States ◽  
Debris Flows ◽  
Economic Impacts ◽  
Western United States ◽  
Fire Debris

scholarly journals Brief communication: Meteorological and climatological conditions associated with the 9 January 2018 post-fire debris flows in Montecito and Carpinteria, California, USA

2018 ◽  
Vol 18 (11) ◽  
pp. 3037-3043 ◽  
Author(s):  
Nina S. Oakley ◽  
Forest Cannon ◽  
Robert Munroe ◽  
Jeremy T. Lancaster ◽  
David Gomberg ◽  
...  
Keyword(s):  
High Intensity ◽  
Debris Flows ◽  
Southern California ◽  
Cold Front ◽  
Santa Barbara ◽  
Fire Debris ◽  
Orographic Enhancement

Abstract. The Thomas Fire burned 114 078 ha in Santa Barbara and Ventura counties, southern California, during December 2017–January 2018. On 9 January 2018, high-intensity rainfall occurred over the Thomas Fire burn area in the mountains above the communities of Montecito and Carpinteria, initiating multiple devastating debris flows. The highest rainfall intensities occurred with the passage of a narrow rainband along a cold front oriented north to south. Orographic enhancement associated with moist southerly flow immediately ahead of the cold front also played a role. We provide an explanation of the meteorological characteristics of the event and place it in historic context.

Sign in / Sign up

Export Citation Format

Share Document