scholarly journals A Stepwise-Clustered Simulation Approach for Projecting Future Heat Wave Over Guangdong Province

2021 ◽  
Vol 9 ◽  
Author(s):  
Jiayan Ren ◽  
Guohe Huang ◽  
Yongping Li ◽  
Xiong Zhou ◽  
Jinliang Xu ◽  
...  
Keyword(s):  
Heat Wave ◽  
Climate Models ◽  
Extreme Event ◽  
Heat Waves ◽  
Extreme Temperature ◽  
Global Climate Models ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Simulation Approach

A heat wave is an important meteorological extreme event related to global warming, but little is known about the characteristics of future heat waves in Guangdong. Therefore, a stepwise-clustered simulation approach driven by multiple global climate models (i.e., GCMs) is developed for projecting future heat waves over Guangdong under two representative concentration pathways (RCPs). The temporal-spatial variations of four indicators (i.e., intensity, total intensity, frequency, and the longest duration) of projected heat waves, as well as the potential changes in daily maximum temperature (i.e., Tmax) for future (i.e., 2006–2095) and historical (i.e., 1976–2005) periods, were analyzed over Guangdong. The results indicated that Guangdong would endure a notable increasing annual trend in the projected Tmax (i.e., 0.016–0.03°C per year under RCP4.5 and 0.027–0.057°C per year under RCP8.5). Evaluations of the multiple GCMs and their ensemble suggested that the developed approach performed well, and the model ensemble was superior to any single GCM in capturing the features of heat waves. The spatial patterns and interannual trends displayed that Guangdong would undergo serious heat waves in the future. The variations of intensity, total intensity, frequency, and the longest duration of heat wave are likely to exceed 5.4°C per event, 24°C, 25 days, and 4 days in the 2080s under RCP8.5, respectively. Higher variation of those would concentrate in eastern and southwestern Guangdong. It also presented that severe heat waves with stronger intensity, higher frequency, and longer duration would have significant increasing tendencies over all Guangdong, which are expected to increase at a rate of 0.14, 0.83, and 0.21% per year under RCP8.5, respectively. Over 60% of Guangdong would suffer the moderate variation of heat waves to the end of this century under RCP8.5. The findings can provide decision makers with useful information to help mitigate the potential impacts of heat waves on pivotal regions as well as ecosystems that are sensitive to extreme temperature.

scholarly journals Geoengineering: Impact of Marine Cloud Brightening Control on the Extreme Temperature Change over East Asia

Atmosphere ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1345
Author(s):  
Do-Hyun Kim ◽  
Ho-Jeong Shin ◽  
Il-Ung Chung
Keyword(s):  
East Asia ◽  
Radiative Forcing ◽  
Climate Models ◽  
Extreme Temperature ◽  
Global Climate Models ◽  
Maximum Temperature ◽  
Daily Minimum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Extreme Temperatures

We investigated the effect of artificial marine cloud brightening on extreme temperatures over East Asia. We used simulation data from five global climate models which have conducted the GeoMIP G4cdnc experiment. G4cdnc was designed to simulate an increase in the cloud droplet number concentration of the global marine lower clouds by 50% under the greenhouse gas forcing of the RCP4.5 scenario. G4cdnc decreased the net radiative forcing in the top of the atmosphere more over the ocean, alleviating the rise in mean temperature under RCP4.5 forcing. For extreme temperatures, G4cdnc reduced both the monthly minimum of daily minimum temperature (TNn) and monthly maximum of daily maximum temperature (TXx). The response of TNn was higher than that of TXx, especially in the winter, over the Sea of Okhotsk and the interior of the continent. This spatial heterogeneity and seasonality of the response were associated with sea ice–albedo and snow–albedo feedbacks. We also calculated the efficacy of warming mitigation as a measure of the relative effect of geoengineering. The efficacy for TXx was higher than that for TNn, opposite to the absolute effect. After the termination of geoengineering, both TNn and TXx tended to rapidly revert to their trend under the RCP4.5 forcing.

Analysis of the extreme heat events in Iran

2017 ◽  
Vol 9 (4) ◽  
pp. 418-432 ◽  
Author(s):  
Hojjatollah Yazdanpanah ◽  
Josef Eitzinger ◽  
Marina Baldi
Keyword(s):  
Trend Analysis ◽  
Heat Wave ◽  
Heat Waves ◽  
Temporal Variations ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Positive Trend ◽  
Content Type ◽  
Hot Days

Purpose The purpose of this paper is to assess the spatial and temporal variations of extreme hot days (H*) and heat wave frequencies across Iran. Design/methodology/approach The authors used daily maximum temperature (Tmax) data of 27 synoptic stations in Iran. These data were standardized using the mean and the standard deviation of each day of the year. An extreme hot day was defined when the Z score of daily maximum temperature of that day was equal or more than a given threshold fixed at 1.7, while a heat wave event was considered to occur when the Z score exceeds the threshold for at least three continuous days. According to these criteria, the annual frequency of extreme hot days and the number of heat waves were determined for all stations. Findings The trend analysis of H* shows a positive trend during the past two decades in Iran, with the maximum number of H* (110 cases) observed in 2010. A significant trend of the number of heat waves per year was also detected during 1991-2013 in all the stations. Overall, results indicate that Iran has experienced heat waves in recent years more often than its long-term average. There will be more frequent and intense hot days and heat waves across Iran until 2050, due to estimated increase of mean air temperature between 0.5-1.1 and 0.8-1.6 degree centigrade for Rcp2.6 and Rcp8.8 scenarios, respectively. Originality/value The trend analysis of hot days and heat wave frequencies is a particularly original aspect of this paper. It is very important for policy- and decision-makers especially in agriculture and health sectors of Iran to make some adaptation strategies for future frequent and intense hot days over Iran.

scholarly journals Response of shortwave cloud radiative effect to greenhouse gases and aerosols and its impact on daily maximum temperature

2020 ◽  
Author(s):  
Tao Tang ◽  
Drew Shindell ◽  
Yuqiang Zhang ◽  
Apostolos Voulgarakis ◽  
Jean-Francois Lamarque ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Global Climate ◽  
Global Climate Models ◽  
Maximum Temperature ◽  
Boreal Summer ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Sulfate Aerosols ◽  
Multilinear Regression

Abstract. Shortwave cloud radiative effects (SWCRE), defined as the difference of shortwave radiative flux between all-sky and clear-sky conditions, have been reported to play an important role in influencing the Earth’s energy budget and temperature extremes. In this study, we employed a set of global climate models to examine the SWCRE responses to CO2, black carbon (BC) aerosols and sulfate aerosols in boreal summer over the Northern Hemisphere. We found that CO2 causes positive SWCRE changes over most of the NH, and BC causes similar positive responses over North America, Europe and East China but negative SWCRE over India and tropical Africa. When normalized by effective radiative forcing, the SWCRE from BC is roughly 3–5 times larger than that from CO2. SWCRE change is mainly due to cloud cover changes resulting from the changes in relative humidity (RH) and, to a lesser extent, changes in circulation and stability. The SWCRE response to sulfate aerosols, however, is negligible compared to that for CO2 and BC. Using a multilinear regression model, it is found that mean daily maximum temperature (Tmax) increases by 0.15 K and 0.13 K per W m−2 increase in local SWCRE under the CO2 and BC experiment, respectively. When domain-averaged, the SWCRE change contribution to summer mean Tmax changes was 10–30 % under CO2 forcing and 30–50 % under BC forcing, varying by region, which can have important implications for extreme climatic events and socio-economic activities.

Seasonal analysis of warm extreme events in Serbia from 1949 to 2017

2020 ◽  
Author(s):  
Ivana Tosic ◽  
Suzana Putniković ◽  
Milica Tošić
Keyword(s):  
Extreme Events ◽  
Heat Waves ◽  
Extreme Temperature ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Extreme Temperature Events ◽  
Air Temperatures ◽  
Seasonal Analysis ◽  
Novi Sad

<p>Worldwide studies revealed a general increase in frequency and severity of warm extreme temperature events. In this study, extreme temperature events including Heat waves (HWs) are examined. Extreme indices are calculated based on daily maximum temperature (Tx). The following definitions are employed: SU - number of days with Tx > 25 °C, umber of days with Tx > 90<sup>th</sup> percentile, and WSDI - number of days in intervals of at least six consecutive days for which Tx is higher than the calendar day 90<sup>th</sup> percentile. Daily values of air temperatures from 11 meteorological stations distributed across Serbia were used for the period 1949–2017.</p><p>Trends of extreme temperature events and their frequencies are examined. The period 1949–2017 are characterised by a warming of extreme temperature indices (SU, Tx90, HWs). It is found that maximum air temperatures increased at all stations, but statistically significant at 6 stations in winter, 4 stations in summer and two stations in spring. The average number of SU per station was between 63.1 in Novi Sad to 73.5 in Negotin during the summer season. Significant increase of SU is recorded in summer for 10 out of 11 stations. Positive trends of SU and Tx90 are observed for all stations and seasons, except in Novi Sad. The average number of Tx90 is about 9 for all stations in all seasons. The longest heat waves prevailed in 2012, but the most severe are recorded in 2007. Increasing of warm extreme events in Serbia are in agreement with studies for different regions of the world.</p>

Database of major European heat waves from 1950 to present

2020 ◽  
Author(s):  
Ondřej Lhotka ◽  
Jan Kyselý
Keyword(s):  
Surface Energy ◽  
Heat Wave ◽  
Spatial Patterns ◽  
Climate Models ◽  
Heat Waves ◽  
Surface Energy Budget ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Human Society ◽  
Driving Mechanisms

<p>Europe experienced several major heat waves in the recent summers, substantially affecting human society and environment. Heat waves are generally related to joint effect of perturbed atmospheric circulation and anomalies in surface energy budget, and they are often linked to hydrological preconditioning. Contributions of these driving mechanisms, however, vary across European climatic zones. Climate models struggle to simulate the spatial differences properly, ultimately leading to large uncertainties in future heat waves’ characteristics. As the first step towards identifying spatial patterns of differences between driving mechanisms of temperature extremes, a pan-European database of observed major heat waves has been created. Heat waves are studied using the E-OBS 20.0e dataset in 0.1° horizontal grid spacing, which is analogous to that used in the ERA5 reanalysis and CORDEX regional climate models. Magnitude of heat waves is defined with respect to local daily maximum temperature (Tmax) variance, using multiples of standard deviation of Tmax summed across individual events. For each heat wave, circulation conditions and surface energy fluxes are analysed using the ERA5 reanalysis, in order to study their links to the heat wave magnitude and geographical location. In the next step, these findings are used for analyzing spatial patterns of heat wave mechanisms and as a source of reference data for evaluation of relevant processes in climate models.</p>

scholarly journals Downscaling probability of long heatwaves based on seasonal mean daily maximum temperatures

2018 ◽  
Vol 4 (1/2) ◽  
pp. 37-52
Author(s):  
Rasmus E. Benestad ◽  
Bob van Oort ◽  
Flavio Justino ◽  
Frode Stordal ◽  
Kajsa M. Parding ◽  
...  
Keyword(s):  
Climate Models ◽  
Global Climate ◽  
Coupled Model ◽  
Principal Component ◽  
Global Climate Models ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Climate Conditions ◽  
Probability Of Occurrence

Abstract. A methodology for estimating and downscaling the probability associated with the duration of heatwaves is presented and applied as a case study for Indian wheat crops. These probability estimates make use of empirical-statistical downscaling and statistical modelling of probability of occurrence and streak length statistics, and we present projections based on large multi-model ensembles of global climate models from the Coupled Model Intercomparison Project Phase 5 and three different emissions scenarios: Representative Concentration Pathways (RCPs) 2.6, 4.5, and 8.5. Our objective was to estimate the probabilities for heatwaves with more than 5 consecutive days with daily maximum temperature above 35 ∘C, which represent a condition that limits wheat yields. Such heatwaves are already quite frequent under current climate conditions, and downscaled estimates of the probability of occurrence in 2010 is in the range of 20 %–84 % depending on the location. For the year 2100, the high-emission scenario RCP8.5 suggests more frequent occurrences, with a probability in the range of 36 %–88 %. Our results also point to increased probabilities for a hot day to turn into a heatwave lasting more than 5 days, from roughly 8 %–20 % at present to 9 %–23 % in 2100 assuming future emissions according to the RCP8.5 scenario; however, these estimates were to a greater extent subject to systematic biases. We also demonstrate a downscaling methodology based on principal component analysis that can produce reasonable results even when the data are sparse with variable quality.

scholarly journals Surface Circulation Types and Daily Maximum and Minimum Temperatures in Southern La Plata Basin

2013 ◽  
Vol 52 (11) ◽  
pp. 2450-2459 ◽  
Author(s):  
Olga Clorinda Penalba ◽  
María Laura Bettolli ◽  
Pablo Andrés Krieger
Keyword(s):  
Heat Waves ◽  
Extreme Temperature ◽  
Maximum Temperature ◽  
Daily Minimum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
La Plata ◽  
Circulation Types ◽  
La Plata Basin ◽  
Surface Circulation

AbstractLa Plata basin is one of the most important agricultural and hydropower-producing regions in the world. Extreme climate events such as cold and heat waves and frost events have a significant socioeconomic impact. This work analyzes the influence of the surface circulation in southern South America on daily maximum temperature TMAX and daily minimum temperature TMIN in southern La Plata basin. A Z test for the comparison of mean values and a Kolmogorov–Smirnov test for the comparison of distributions of TMAX and TMIN associated with each circulation pattern were performed. Specific daily surface circulation types are found to contribute to TMAX and TMIN anomalies and to have a predominant occurrence in the development of the extreme temperature events in the region. The TMAX spatial response to the regional low-level circulation is more homogenous and extended than is the response of TMIN.

scholarly journals Heat waves characteristics and their relation to air quality in Athens

2014 ◽  
Vol 16 (5) ◽  
pp. 919-928 ◽  
Keyword(s):  
Air Quality ◽  
Heat Wave ◽  
Heat Waves ◽  
City Centre ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Annual Number ◽  
Daily Maximum ◽  
Daily Average ◽  
Suburban Site

<div> <p>This paper studies the characteristics of the heat waves that were observed in Athens, Greece since 1951. A heat wave is detected when two temperature criteria are fulfilled at the city centre: the daily maximum temperature value is at least 37 <sup>o</sup>C and the daily average temperature value is at least 31 <sup>o</sup>C. Information about the intensity, duration, timing in season and annual frequency of occurrence of heat waves were extracted. The slope of the linear fit of the annual number of heat wave days indicated that 1.30 more heat wave days per year were observed after 1992. The intensity and the duration of heat waves have also increased since 90s, while heat wave days have been detected during the whole summer since then, even during the first days of September. Additionally, air quality at the centre and at a suburb of Athens during the heat wave days that were identified during the last decade is examined. The daily average value of PM<sub>10</sub> concentration exceeded 50 μg m<sup>-3</sup> in 65% and 59% of the heat wave days at the urban and the suburban site, respectively, while the information and the alert O<sub>3</sub> threshold were exceeded in 17% and 5% of the heat wave days, respectively, at the suburban site. The degradation of air quality during heat wave days is also verified by the means of the common air quality index. Moreover, it was found that O<sub>3</sub> levels decrease when heat waves last more than 6 days.&nbsp;</p> </div> <p>&nbsp;</p>

scholarly journals Joint Occurrence of Daily Temperature and Precipitation Extreme Events over Canada

2014 ◽  
Vol 53 (9) ◽  
pp. 2148-2162 ◽  
Author(s):  
Bárbara Tencer ◽  
Andrew Weaver ◽  
Francis Zwiers
Keyword(s):  
Climate Models ◽  
Regional Climate ◽  
Heavy Precipitation ◽  
Maximum Temperature ◽  
Daily Minimum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Negative Consequences ◽  
Temperature And Precipitation ◽  
Joint Occurrence

AbstractThe occurrence of individual extremes such as temperature and precipitation extremes can have a great impact on the environment. Agriculture, energy demands, and human health, among other activities, can be affected by extremely high or low temperatures and by extremely dry or wet conditions. The simultaneous or proximate occurrence of both types of extremes could lead to even more profound consequences, however. For example, a dry period can have more negative consequences on agriculture if it is concomitant with or followed by a period of extremely high temperatures. This study analyzes the joint occurrence of very wet conditions and high/low temperature events at stations in Canada. More than one-half of the stations showed a significant positive relationship at the daily time scale between warm nights (daily minimum temperature greater than the 90th percentile) or warm days (daily maximum temperature above the 90th percentile) and heavy-precipitation events (daily precipitation exceeding the 75th percentile), with the greater frequencies found for the east and southwest coasts during autumn and winter. Cold days (daily maximum temperature below the 10th percentile) occur together with intense precipitation more frequently during spring and summer. Simulations by regional climate models show good agreement with observations in the seasonal and spatial variability of the joint distribution, especially when an ensemble of simulations was used.

Assessing the contribution of multiple forcings to changes in temperature extremes 1981–2020 using CMIP6 climate models

2021 ◽  
Author(s):  
Mastawesha Misganaw Engdaw ◽  
Andrew Ballinger ◽  
Gabriele Hegerl ◽  
Andrea Steiner
Keyword(s):  
Climate Change ◽  
Greenhouse Gases ◽  
Climate Models ◽  
Temporal Trends ◽  
Maximum Temperature ◽  
Daily Minimum Temperature ◽  
Daily Maximum Temperature ◽  
Daily Maximum ◽  
Temperature Extremes ◽  
Cold Temperatures

&lt;p&gt;In this study, we aim at quantifying the contribution of different forcings to changes in temperature extremes over 1981&amp;#8211;2020 using CMIP6 climate model simulations. We first assess the changes in extreme hot and cold temperatures defined as days below 10% and above 90% of daily minimum temperature (TN10 and TN90) and daily maximum temperature (TX10 and TX90). We compute the change in percentage of extreme days per season for October-March (ONDJFM) and April-September (AMJJAS). Spatial and temporal trends are quantified using multi-model mean of all-forcings simulations. The same indices will be computed from aerosols-, greenhouse gases- and natural-only forcing simulations. The trends estimated from all-forcings simulations are then attributed to different forcings (aerosols-, greenhouse gases-, and natural-only) by considering uncertainties not only in amplitude but also in response patterns of climate models. The new statistical approach to climate change detection and attribution method by Ribes et al. (2017) is used to quantify the contribution of human-induced climate change. Preliminary results of the attribution analysis show that anthropogenic climate change has the largest contribution to the changes in temperature extremes in different regions of the world.&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Keywords:&lt;/strong&gt; climate change, temperature, extreme events, attribution, CMIP6&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Acknowledgement:&lt;/strong&gt; This work was funded by the Austrian Science Fund (FWF) under Research Grant W1256 (Doctoral Programme Climate Change: Uncertainties, Thresholds and Coping Strategies)&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document