scholarly journals The Effect of Different Sources of Selenium Supplementation on the Meat Quality Traits of Young Charolaise Bulls during the Finishing Phase

Antioxidants ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 596
Author(s):  
Silvia Grossi ◽  
Luciana Rossi ◽  
Michele De Marco ◽  
Carlo Angelo Sgoifo Rossi
Keyword(s):  
Beef Cattle ◽  
Meat Quality ◽  
Dry Matter ◽  
Carcass Characteristics ◽  
Color Stability ◽  
Quality Parameters ◽  
Selenium Yeast ◽  
Cattle Meat ◽  
Finishing Beef Cattle ◽  
Different Sources

The aim of the study was to compare the effects of sodium selenite (SS), selenium yeast (SY), and hydroxy-selenomethionine (OH-SeMet) on the meat quality and selenium (Se) deposition of finishing beef cattle. Sixty-three bulls were distributed over 3 treatments and fed SS, SY, or OH-SeMet at 0.2 mg kg−1 dry matter (DM) for 60 d. None of the Se sources affected the growth performance or carcass characteristics. OH-SeMet showed a higher Se transfer to the meat than SS or SY (p < 0.01). SY and OH-SeMet reduced the shear force of the meat (p < 0.0001), improved pH (p < 0.001), and reduced the drip losses (p < 0.001) and the lipid oxidation of the meat (p < 0.001). During 8 d of storage, OH-SeMet showed higher levels of meat lightness (L*) and yellowness (b*) than SS (p < 0.001), while the SY meat showed a higher L* than SS, albeit only on d 6. OH-SeMet improved b*, compared to SS, and also compared to SY on days 4, 7, and 8 (p < 0.001). Supplementing beef with SY and OH-SeMet improved several meat quality parameters. OH-SeMet appears to be the most effective strategy to improve the Se content and color stability of beef cattle meat.

scholarly journals Effect of stress during slaughter on carcass characteristics and meat quality in tropical beef cattle

2020 ◽  
Vol 33 (10) ◽  
pp. 1656-1665
Author(s):  
Apolo A. Carrasco-García ◽  
Violeta T. Pardío-Sedas ◽  
Gloria G. León-Banda ◽  
Concepción Ahuja-Aguirre ◽  
Pedro Paredes-Ramos ◽  
...  
Keyword(s):  
Beef Cattle ◽  
Meat Quality ◽  
Shear Force ◽  
Carcass Characteristics ◽  
Principal Component ◽  
Quality Parameters ◽  
Cortisol Concentration ◽  
Operating Conditions ◽  
Drip Loss ◽  
Meat Samples

Objective: This study aimed to determine the effects of stress during slaughter of beef cattle on physiological parameters, carcass, and meat quality at a Federal Inspection Type slaughterhouse located in the southeast of Mexico.Methods: A total of 448 carcasses of male Zebu×European steers with an average age of 36 months were included. Carcass assessment of presence of bruises and bruise characteristics was carried out on each half-carcass. Blood variable indicators of stress (packed cell volume, neutrophil to lymphocyte ratio, glucose, cortisol concentration) and meat quality parameters (pH, color, shear force, drip loss) were evaluated.Results: Of the 448 carcasses evaluated, 81% of the carcasses showed at least one bruise; one bruise was detected in 36.6% and two bruises in 27.0% of animals. Of the 775 bruises found, 69.2% of the bruises were grade 1 in region 3. Of the 448 carcasses studied, 69.6% showed hyperglycemia (6.91 mmol/L); 44.3% and 22.7% showed high (74.7 ng/mL) and extremely high (108.8 ng/mL) cortisol levels, respectively, indicative of inadequate handling of animals during preslaughter and slaughter. Of the carcasses evaluated, 90.4% had a pH ≥5.8 with an average of pH 6.3. In both pH groups, meat samples showed L* values >37.0 (81.6%) and a shear force >54.3 N; meat pH≥5.8 group showed a drip loss of 2.5%. These findings were indicative of dark, firm, and dry (DFD) meat. According to principal component analysis, grades 1 and 2 bruises in region 3 and grade 1 bruises in region 5 were highly associated with cortisol, drip loss, and color parameters b* and h* and were negatively associated with L*, a*, and C*.Conclusion: The bruises probably caused by stress-inducing situations triggered DFD meat. Appropriate changes in handling routines in operating conditions should be made to minimize stress to animals during the slaughter process to improve animal welfare and meat quality.

Meat quality and carcass characteristics of Norwegian dairy and Holstein-Friesian cattle

2007 ◽  
Vol 2007 ◽  
pp. 110-110
Author(s):  
R.M. Kirkland ◽  
D.C. Patterson ◽  
B.W. Moss ◽  
T.W.J. Keady ◽  
R.W.J. Steen
Keyword(s):  
Meat Quality ◽  
Production Systems ◽  
Carcass Characteristics ◽  
Quality Parameters ◽  
Quality Characteristics ◽  
Production Data ◽  
Dairy Traits ◽  
Holstein Friesian ◽  
Friesian Cattle ◽  
Norwegian Dairy

Any evaluation of breeds or production systems for beef must consider effects on production, carcass and meat quality characteristics. Holstein-Friesian (HF) cattle are bred for dairy traits only, while Norwegian dairy cattle (NOR) have been selected with some emphasis on beef characteristics. A comparison of production data from bulls of these two breeds has been presented previously (Kirkland et al., 2005). The objective of the present study was to evaluate specific carcass and meat quality parameters of HF and NOR bulls.

scholarly journals Meat quality and fatty acid profile of the musculus longissimus lumborum in Czech Fleckvieh, Charolais and Charolais × Czech Fleckvieh bulls fed different types of silages

2010 ◽  
Vol 55 (No. 11) ◽  
pp. 479-487 ◽  
Author(s):  
L. Bartoň ◽  
D. Bureš ◽  
V. Kudrna
Keyword(s):  
Fatty Acid ◽  
Meat Quality ◽  
Fatty Acid Profile ◽  
Dry Matter ◽  
Intramuscular Fat ◽  
Quality Parameters ◽  
Dietary Energy ◽  
Maize Silage ◽  
Different Types ◽  
Longissimus Lumborum

The effects of breed and diet containing different types of silages on meat quality parameters and fatty acid profile of m. longissimus lumborum (MLL) were evaluated in a total of 30 Czech Fleckvieh (CF), Charolais (CH) and Charolais &times; Czech Fleckvieh (CH &times; CF) bulls. The animals were fed two mixed diets: MS (based on maize silage) and LCS (based on legume-cereal mixture silage and lucerne silages) with different concentrations of dietary energy and fatty acids. The MLL from CH bulls had the lowest content of dry matter (P &lt; 0.01), less protein (P &lt; 0.01) and lighter meat (P &lt; 0.01) compared to the CF. The extensive LCS diet reduced dry matter (P &lt; 0.01) and intramuscular fat (P &lt; 0.01) and increased the content of hydroxyproline (P &lt; 0.05). The CH bulls exhibited higher PUFA n-3 (P &lt; 0.05) and lower MUFA (P &lt; 0.05) compared to the CF, with the CH &times; CF being intermediate. The LCS diet enhanced the proportions of PUFA (P &lt; 0.05) and PUFA n-3 (P &lt; 0.001) and reduced MUFA (P &lt; 0.001). In conclusion, both breed and diet affected the meat quality and fatty acid profile of the intramuscular fat of the bulls. The replacement of maize silage with the legume-cereal mixture and lucerne silages in the diet reduced the concentration of intramuscular fat and improved its fatty acid profile from the human nutrition perspective.

Effects of genotype and dietary forage to concentrate ratio during the finishing period on carcass characteristics and meat quality of lambs from hill sheep systems

2001 ◽  
Vol 137 (2) ◽  
pp. 205-220 ◽  
Author(s):  
A. F. CARSON ◽  
B. W. MOSS ◽  
L. E. R. DAWSON ◽  
D. J. KILPATRICK
Keyword(s):  
Meat Quality ◽  
Dry Matter ◽  
Carcass Characteristics ◽  
Live Weight ◽  
The Other ◽  
Grass Silage ◽  
Classification Score ◽  
Forage:Concentrate Ratio ◽  
Matter Basis

The study investigated the effects of lamb genotype produced from hill flocks on feed efficiency, carcass characteristics and meat quality in animals finished on either a high forage:concentrate ratio diet (HFC) or a low forage:concentrate ratio diet (LFC). Purebred Scottish Blackface (BXB) lambs were compared with Blue-Faced Leicester×Scottish Blackface (BLXB) and Texel×Scottish Blackface (TXB) lambs. Purebred Cheviot (CXC), Suffolk×Cheviot (SXC) and Texel×Cheviot (TXC) lambs were also investigated. Lambs on the LFC diet were offered grass silage and concentrates mixed in the proportion of 0·80 silage and 0·20 concentrates on a dry matter basis. The LFC diet consisted of 0·20 grass silage and 0·80 concentrates on a dry matter basis. Representative lambs were slaughtered at the start of the experiment and on reaching 38 and 46 kg live weight. Averaged over the two slaughter weights, within the Blackface cross lambs, BXB had a lower liveweight gain (P < 0·01) than either BLXB or TXB (138, 207 and 203 (S.E. 11·1) g/day, respectively). Within the Cheviot cross lambs, CXC had a lower liveweight gain (P < 0·05) than SXC (188 v. 220 (S.E. 11·1) g/day), while SXC and TXC (204 g/day) had similar liveweight gains. Lambs on the LFC diet had a higher dressing proportion (P < 0·001) compared with lambs finished on the HFC diet (0·466 v. 0·434 (S.E. 0·0018) kg carcass per kg live weight). Averaged over the two slaughter weights BXB lambs had a lower (P < 0·05) dressing proportion than the other genotypes. Carcass conformation classification (assessed on a five-point scale) was higher (P < 0·001) in lambs finished on the LFC diet (3·0 v. 2·4 (S.E. 0·04)). Conformation classification was higher in lambs produced from Cheviot compared with Blackface ewes (P < 0·05). Within the Blackface cross lambs, BXB and BLXB lambs had a lower conformation classification (P < 0·001) than TXB lambs (2·4, 2·4 and 2·9 (S.E. 0·08) respectively). Within the Cheviot ewes, TXC lambs had a higher (P < 0·001) classification than either CXC or SXC (3·1, 2·7 and 2·7 (S.E. 0·08) respectively). Lambs finished on the LFC diet had a higher fat classification score compared with lambs on the HFC diet (P < 0·001) (3·4 v. 2·8 (S.E. 0·04)). Fat classification was similar across all genotypes. Lambs finished on the LFC diet had a lower ash content in the carcass than lambs finished on a HFC diet (P < 0·01) (44 v. 47 (S.E. 0·8) g/kg). Lamb genotype and dietary forage:concentrate ratio had no significant effect on cooking loss, sarcomere length, Warner–Bratzler shear force and L* values. Ultimate pH (pHU) was not influenced by dietary forage:concentrate ratio, but was significantly (P < 0·01) higher in BXB lambs compared with BLXB, TXB, CXC and TXC lambs. Lambs offered the LFC diet during the finishing period had significantly higher values for a* (P < 0·05), b* (P < 0·001), C* (P < 0·001) and H0 (P < 0·05) than lambs offered a HFC diet. Of these parameters only b* was significantly affected by lamb genotype, with BXB lambs having a lower value (P < 0·05) than the other genotypes.

Effect of feeding barley based diets on animal performance, carcass characteristics and meat quality of crossbred beef cattle with and without Wagyu genetics

1997 ◽  
Vol 77 (4) ◽  
pp. 655-662 ◽  
Author(s):  
P. S. Mir ◽  
D. R. C. Bailey ◽  
Z. Mir ◽  
S. D. M. Jones ◽  
T. Entz ◽  
...  
Keyword(s):  
Beef Cattle ◽  
Meat Quality ◽  
Shear Force ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Barley Grain ◽  
Crossbred Cattle ◽  
Target Weight ◽  
Meat Samples

Growth performance, carcass characteristics and meat quality of European and British crossbred (EBC; no Wagyu genetics; 28 heifers and 30 steers) cattle were compared with crossbred cattle with 75% Wagyu genetics (WC; seven heifers and 14 steers) to determine the influence of Wagyu genetics on marbling grade of beef cattle fed barley-based diets in a factorial design experiment. Weaned calves (250 d average age) were fed, one of two diets (diet 1, 35% barley grain; diet 2, 40% hay cubes on DM basis, with barley silage, protein and vitamin/mineral premix) for 84 d and then fed diet 1 until they weighed 394 to 432 kg. All cattle were finished on an 80% (DM basis) rolled barley diet and slaughtered. Carcasses were graded and samples procured for meat quality and Warner–Bratzler shear force determination. Number of days on backgrounding diets to arrive at target weight (380 kg) was greater (P < 0.05) for the WC cattle, owing to relatively lower ADG, but days on the finishing diet were fewer for these cattle, compared with EBC cattle. Warm carcass yield (dressing percent) was greater (P < 0.05), but backfat depth was lower (P < 0.05) for WC cattle relative to that of EBC cattle, yet proportion of lean meat yield was similar. Eighty three percent of WC cattle carcasses had Canada AAA (small or more) marbling grade compared with 13% for EBC cattle carcasses. Mean shear force of meat samples from EBC and WC cattle was 4.2 and 3.8 kg, respectively. Results indicated that the extent of carcass marbling can be increased by incorporating Wagyu genetics but age at slaughter of WC cattle was 19 d greater than that of EBC cattle and carcass size was reduced. Key words: Average daily gain, carcass characteristics, European and British crossbred, feed to gain ratio, meat quality, Wagyu crossbred cattle

scholarly journals Relationships between Hha1 Calpastatin Gene Polymorphism, Growth Performance, and Meat Characteristics of Awassi Sheep

Animals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 667
Author(s):  
Khaleel I. Jawasreh ◽  
Ahmad H. Al-Amareen ◽  
Pauline Y. Aad
Keyword(s):  
Body Weight ◽  
Growth Performance ◽  
Meat Quality ◽  
Gene Polymorphisms ◽  
Carcass Characteristics ◽  
Quality Parameters ◽  
Longissimus Muscle ◽  
Final Body Weight ◽  
Awassi Sheep ◽  
Ram Lambs

Advances in molecular genetics have allowed the identification of genes that can enhance livestock production. The aim of this study was to investigate possible relationships between the calpastatin (CAST) Hha1 gene polymorphisms and growth performance, carcass characteristics, and meat quality in Awassi sheep. A total of 87 blood samples were collected from two-week-old Awassi ram lambs. The amplification of the CAST Hha1 gene yielded a fragment of 622 bp. Three CAST genotypes were found in Awassi sheep: MM for two fragments (385 bp and 281 bp), MN for three fragments (622 bp, 385 bp, and 281 bp), and NN for only one fragment (622 bp). The M and N allele frequencies of the CAST Hha1 genotypes were 0.765 and 0.235, respectively, while the genotypic frequencies of MM, MN, and NN were 0.586, 0.356, and 0.057, respectively. Based on CAST Hha1 gene polymorphisms, three groups of lambs (MM: n = 8; MN: n = 6; and NN: n = 3 genotypes) were subjected to a fattening period of 70 days to investigate growth performance and meat characteristics. Only the final body weight and longissimus muscle width were significantly different between the three genotypes, while no significant differences were detected in any other carcass characteristics and meat quality parameters. In this study, new variants were observed in CAST using the Hha1 restriction site, potentially assisting in Awassi sheep breeding and selection programs to improve final body weight and longissimus muscle width.

scholarly journals Use of barley or corn silage when fed with barley, corn, or a blend of barley and corn on growth performance, nutrient utilization, and carcass characteristics of finishing beef cattle

2019 ◽  
Vol 4 (1) ◽  
pp. 129-140 ◽  
Author(s):  
Jordan A Johnson ◽  
Brittney D Sutherland ◽  
John J McKinnon ◽  
Tim A McAllister ◽  
Gregory B Penner
Keyword(s):  
Body Weight ◽  
Beef Cattle ◽  
Growth Performance ◽  
Carcass Characteristics ◽  
Corn Silage ◽  
Neutral Detergent Fiber ◽  
Feed Ratio ◽  
Final Body Weight ◽  
Liver Abscesses ◽  
Finishing Beef Cattle

Abstract The objective of this study was to evaluate the effects of the source of silage, cereal grain, and their interaction on growth performance, digestibility, and carcass characteristics of finishing beef cattle. Using a completely randomized design within an 89-d finishing study, 288 steers were randomly assigned to 1 of 24 pens (12 steers/pen) with average steer body weight (BW) within a pen of 464 kg ± 1.7 kg (mean ± SD). Diets were arranged in a 2 × 3 factorial with corn silage (CS) or barley silage (BS) included at 8% (dry matter [DM] basis). Within each silage source, diets contained dry-rolled barley grain (BG; 86% of DM), dry-rolled corn grain (CG; 85% of DM), or an equal blend of BG and CG (BCG; 85% of DM). Total tract digestibility of nutrients was estimated from fecal samples using near-infrared spectroscopy. Data were analyzed with pen as the experimental unit using the Mixed Model of SAS with the fixed effects of silage, grain, and the two-way interaction. Carcass and fecal kernel data were analyzed using GLIMMIX utilizing the same model. There were no interactions detected between silage and grain source. Feeding CG increased (P &lt; 0.01) DM intake by 0.8 and 0.6 kg/d relative to BG and BCG, respectively. Gain-to-feed ratio was greater (P = 0.04) for BG (0.172 kg/kg) than CG (0.162 kg/kg) but did not differ from BCG (0.165 kg/kg). Furthermore, average daily gain (2.07 kg/d) and final body weight did not differ among treatments (P ≥ 0.25). Hot carcass weight (HCW) was 6.2 kg greater (372.2 vs. 366.0 kg; P &lt; 0.01) and dressing percentage was 0.57 percentage units greater (59.53 vs. 58.96 %; P = 0.04) for steers fed CS than BS, respectively. There was no effect of dietary treatment on the severity of liver abscesses (P ≥ 0.20) with 72.0% of carcasses having clear livers, 24.4% with minor liver abscesses, and 3.6% with severe liver abscesses. Digestibility of DM, organic matter, crude protein, neutral detergent fiber, and starch were greater for BG (P &lt; 0.01) than CG or BCG. As expected, grain source affected the appearance of grain kernels in the feces (P ≤ 0.04). Feeding CS silage increased the appearance of fractured corn kernels (P = 0.04), while feeding BS increased fiber appearance in the feces (P = 0.02). Current results indicate that when dry rolled, feeding BG resulted in improved performance and digestibility compared with CG and BCG. Even at low inclusion levels (8% of DM), CS resulted in improved carcass characteristics relative to BS.

Sign in / Sign up

Export Citation Format

Share Document