scholarly journals Longitudinal Study on Construction Organization’s BIM Acceptance

2020 ◽  
Vol 10 (15) ◽  
pp. 5358
Author(s):  
Seulki Lee ◽  
Jungho Yu
Keyword(s):  
Longitudinal Study ◽  
Structural Equation ◽  
Information Modeling ◽  
Equation Modeling ◽  
Construction Sites ◽  
Factors Affecting ◽  
Construction Organizations ◽  
Building Information ◽  
Construction Organization ◽  
Acceptance Model

The Korean domestic market is focused on the introduction of BIM (Building Information Modeling) owing to an influx of investment due to increased interest and mandatory application of BIM. However, the rate of BIM introduction is high, while BIM user proficiency is low. Against these problems, the authors proposed an acceptance model for BIM in construction organizations in 2012. As the number of BIM application cases increases and the number of BIM-trained users increases as time goes on, BIM users’ positive perception of BIM values are expected to increase, which may change the BIM acceptance mechanism. Therefore, we conducted a longitudinal study of the 2012 BIM acceptance model against 2019 data to estimate changes in factors affecting BIM acceptance attitudes as well as the mechanism of the relationships between factors over time spent using the technology. To generalize the results, the respondents were spread across construction sites. The data obtained 119 samples from a sample of experienced users of BIM. We used AMOS 21.0 for hypothesis testing of structural equation modeling (SEM), and the 2019 BIM acceptance model was compared against the 2012 acceptance model using an independent sample t-test. As a result, it was confirmed that the 2012 BIM acceptance model is still suitable for describing the BIM acceptance mechanism of the construction organization, and there was a difference between the 2012 model and the 2019 model. This seems to have changed the mechanism of BIM acceptance by being change perception of BIM users as time goes on. The results of this study can be used to establish a BIM activation strategy for each BIM acceptance stage and are expected to be applicable to establishing a BIM activation strategy for construction organizations or countries with similar BIM acceptance stage.

Effect of Environmental Factors on Knowledge Sharing in Construction Organization

2015 ◽  
Vol 74 (4) ◽  
Author(s):  
Katun M. Idris ◽  
Kherun N. Ali ◽  
Godwin U. Aliagha ◽  
Ali Keyvanfar
Keyword(s):  
Environmental Factors ◽  
Knowledge Sharing ◽  
Structural Equation ◽  
Project Managers ◽  
Equation Modeling ◽  
Managerial Leadership ◽  
Leadership Strategy ◽  
Construction Organizations ◽  
Strategy Planning ◽  
Construction Organization

The processes of environmental factors are milieu-focus, which  can influence the knowledge sharing in construction organization. This study examines the possible effect of environmental factors in respect to managerial leadership, strategy/planning and culture on the relationship to the knowledge sharing.  The study was carried out on project managers in construction organizations in Nigeria using a stratified random sample of 323 of  different designations. A hypothesized model of knowledge sharing, and environmental factors was tested using structural equation modeling approach, and a proposed model was therefore developed. All the factor loadings were significant, leading to a prudent model achievement. The study serves as a guide to the construction managers for sharing knowledge in the construction organization. The finding indicated that environmental factors demonstrated significant influence on knowledge sharing. 

Factors Influencing the Use of Smartphones for Programing: A Structural Equation Modeling Approach

2020 ◽  
Vol 17 (05) ◽  
pp. 2050032
Author(s):  
Asim Suleman A. Alwabel ◽  
Said S. Al-Gahtani ◽  
Ahmed Talab
Keyword(s):  
Technology Acceptance ◽  
Structural Equation ◽  
End Users ◽  
Ease Of Use ◽  
Decision Makers ◽  
Equation Modeling ◽  
External Control ◽  
Factors Affecting ◽  
Hand Tool ◽  
Acceptance Model

The ubiquitous application of smartphones and their advanced development have created an opportunity for using them as coding platforms. In this study, we compared between the use of personal computers (PCs) and smartphones to investigate the factors affecting the use of smartphones in programing. The behavioral intentions of smartphone end-users are inspired by the ease of use perception, enjoyment perception, programing anxiety, perception of external control, and smartphone design aesthetics. Although the [Formula: see text] value of the smartphone model was lower than that of the PC model, the end-users’ adoption decisions could have shifted toward accepting the use of smartphones for programing had their decisions been free of enforcement. In this study, design aesthetics and programing anxiety were introduced to Technology Acceptance Model 3 in an Arabic environment. Additionally, the model was creatively applied for guiding practitioners in two situations. First, when organizations are in the quest for emerging technology to replace the legacy technology, they might apply the presented side-by-side comparison of the use of PCs with that of smartphones in programing. Second, at a time when decision makers analyze what might hinder the adoption of a recently introduced technology, the model can be a successful hand tool guiding the top management in identifying technology acceptance interventions, an approach this research revealed. Furthermore, in this paper, the research implications and recommendations are presented for technology practitioners and designers.

A MEASUREMENT INSTRUMENT FOR THE TECHNOLOGY EXTENT AND PROCESS EFFICIENCY IN BIM ENABLED CONSTRUCTION PROJECTS

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Gozde Basak Ozturk
Keyword(s):  
Technology Use ◽  
Structural Equation ◽  
Construction Projects ◽  
Construction Project ◽  
Measurement Instrument ◽  
Information Modeling ◽  
Process Efficiency ◽  
Equation Modeling ◽  
Related Data ◽  
Building Information

Technology use in all fields can play an important role as the booster in creating lean and efficient processes. Technology use may result in reduced duplications and delays in workflows while helping to speed up task realization. Building Information Modeling (BIM) enhances knowledge share, use and reuse for better collaboration, communication, coordination, and monitoring as a knowledge base platform. BIM enhanced construction projects may positively affect the process efficiency. The aim of this paper is to define a measurement instrument of BIM usage as technology enhancer tool and of process efficiency of construction projects. Research leans on the prominent literature to concrete the measurement instrument. A survey is established to construction project professionals to understand the technology efficiency and process efficiency in BIM enabled construction projects. The research based on the related data collected from 92 professionals experienced both in traditional project delivery methods and BIM enabled construction projects. The respondents are the construction industry experts comprised of construction project managers, BIM managers, and BIM implementation experts (architects, civil engineers, mechanical engineers, electrical engineers etc.). Data is analyzed and tested with structural equation modeling software to verify the proposed measurement instrument. The technology efficiency and process efficiency factors for BIM enabled construction projects are tested and refined. Research findings present the measurement instrument for both technology and process efficiency in BIM enabled construction projects.

scholarly journals An Empirical Study on the Acceptance of 4D BIM in EPC Projects in China

2019 ◽  
Vol 11 (5) ◽  
pp. 1316 ◽  
Author(s):  
Pan Gong ◽  
Ningshuang Zeng ◽  
Kunhui Ye ◽  
Markus König
Keyword(s):  
Technology Acceptance ◽  
Structural Equation ◽  
Construction Projects ◽  
Behavior Pattern ◽  
Cost Savings ◽  
Information Modeling ◽  
Equation Modeling ◽  
Future Research ◽  
Leading Role ◽  
Building Information

The engineering-procurement-construction (EPC) method has the potential to help construction projects achieve sustainable performance, e.g., the contractor’s early involvement, cost savings, and a reduced schedule. However, high uncertainties and complexities are contained in EPC projects. 4D BIM (Building Information Modeling) with abilities to simplify the time and space relationships of construction activities and support multi-party information sharing is beneficial to EPC project management. The behavior pattern of the project personnel toward accepting 4D BIM information systems or tools needs to be explored. Therefore, a research model of the acceptance of 4D BIM in EPC projects with eight latent constructs is proposed through a literature review of technology acceptance theories. Data is collected from a questionnaire survey and interviews. Research hypotheses are examined using PLS-SEM (partial least squares-structural equation modeling). Empirical evidence is collected from China, and implications to the developing countries facing the challenge of developing a technology-intensive construction industry are provided: (1) Adopting 4D BIM in the EPC project is beneficial; (2) the task-technology fit plays a leading role in technology acceptance; (3) the management incentive is inefficient at the operational stage. Suggestions for future research on 4D BIM acceptance in complex construction projects with abundant data and alternative models are provided.

Antecedents of the adoption of building information modeling technology in Korea

2019 ◽  
Vol 26 (8) ◽  
pp. 1735-1749 ◽  
Author(s):  
Eunil Park ◽  
Sang Jib Kwon ◽  
Jinyoung Han
Keyword(s):  
Technology Acceptance ◽  
Organizational Support ◽  
Building Information Modeling ◽  
Ease Of Use ◽  
Information Modeling ◽  
Equation Modeling ◽  
Future Research ◽  
Content Type ◽  
Building Information ◽  
Acceptance Model

Purpose Although the notable and significant role of building information modeling (BIM) technologies in construction industries has gained user attention, only few studies have been examined on the user adoption of the technologies. The purpose of this paper is to introduce an acceptance model for BIM technologies and investigate how external factors which were extracted by in-depth interviews promote the adoption of such technologies. Design/methodology/approach An on-line survey was conducted by two South Korean survey agencies to test the acceptance model for BIM technologies. Then, the structural equation modeling (SEM) and confirmatory factor analysis (CFA) methods were used. Findings The results of the SEM and CFA methods from on-site construction employees (n=818) in Korea collected by the online survey indicate that compatibility and organizational support play a core role in positively and significantly affecting both perceived ease of use and usefulness, and that the connections introduced by the origin technology acceptance model are mainly confirmed. Originality/value Using the findings of the results, both implications and notable limitations are presented. Moreover, practical developers, as well as academic researchers can employ the results when they attempt to conduct future research.

scholarly journals Acceptance Model for Mobile Building Information Modeling (BIM)

2019 ◽  
Vol 9 (18) ◽  
pp. 3668 ◽  
Author(s):  
Hong ◽  
Lee ◽  
Kim ◽  
Yu
Keyword(s):  
Structural Equation ◽  
Building Information Modeling ◽  
Structural Equation Models ◽  
Information Modeling ◽  
Mobile Environment ◽  
Collaborative Performance ◽  
Building Information ◽  
Survey Results ◽  
Acceptance Model ◽  
Significant Factors

Mobile Building Information Modeling (BIM) is noted for tools that enable the systematic interchange of information and contribute to enhancing collaborative performance through BIM. BIM programs, which are continuously available in the mobile environment, have been developed. Moreover, in some sites, mobile BIM is applied to generate benefits in projects. Various efforts are being made to use mobile BIM; however, its utilization is low. Also, mobile BIM has lacked an analysis of the factors that affect actual users’ acceptance of mobile BIM. Therefore, this study analyzes the factors that affect the acceptance of mobile BIM by construction practitioners and presents the association of factors as a model to activate mobile BIM use. To this end, this study analyzed a literature review for suggesting the factors that were expected to affect mobile BIM acceptance. The assessment items were decided based on the analysis result. Second, 111 copies were received by surveying the construction practitioners. Third, it identified factors that significantly affected the acceptance of mobile BIM and proposed models through factor analysis and structural equation models. Finally, based on the analysis, it presented the findings. This study expects to contribute to enhanced acceptance of mobile BIM technology by managing the significant factors properly. Also, it is expected that the result can be used to develop a variety of mobile BIM that is more easily acceptable to them. This study presented a model for accepting mobile BIM based on the survey results of Korean practitioners; therefore, it is necessary to explore ways to generalize the model in the future.

scholarly journals Investigating the Critical Factors of Professionals’ BIM Adoption Behavior Based on the Theory of Planned Behavior

2021 ◽  
Vol 18 (6) ◽  
pp. 3022
Author(s):  
Zezhou Wu ◽  
Mingyang Jiang ◽  
Heng Li ◽  
Xiaochun Luo ◽  
Xiaoying Li
Keyword(s):  
Theory Of Planned Behavior ◽  
Planned Behavior ◽  
Latent Variables ◽  
Structural Equation ◽  
Goodness Of Fit ◽  
Reliability And Validity ◽  
Information Modeling ◽  
Equation Modeling ◽  
Critical Factors ◽  
Building Information

In recent years, building information modeling (BIM) has been receiving growing interest from the construction industry of China. Nevertheless, although BIM has many foreseeable advantages, many studies claimed that these advantages have not been sufficiently achieved in practice at the current stage. In this circumstance, it is interesting to investigate what really drives the adoption of BIM. Based on Ajzen’s theory of planned behavior (TPB), a hypothetical model which involves nine latent variables is initially established. Then, a questionnaire is designed and distributed to the construction professionals in the Chinese context. After reliability and validity analysis, the goodness-of-fit of the initial model and the related theoretical assumptions are tested through structural equation modeling (SEM). Based on the modification indicators, a modified model is finally derived. Results show that economic viability and governmental supervision are the most critical factors that influence construction professionals’ BIM adoption behavior in China, sharing weights of 0.37 and 0.34, respectively, whereas other factors play limited roles in this regard. The research findings revealed from this study can provide insightful references for countries that intend to promote BIM adoption in a similar circumstance.

scholarly journals Factors Affecting Sustainable Intention to Use Mobile Banking Services

SAGE Open ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 215824402110299
Author(s):  
Phaninee Naruetharadhol ◽  
Chavis Ketkaew ◽  
Niracha Hongkanchanapong ◽  
Piranat Thaniswannasri ◽  
Techin Uengkusolmongkol ◽  
...  
Keyword(s):  
Technology Acceptance ◽  
Structural Equation ◽  
Equation Modeling ◽  
Intention To Use ◽  
Mobile Banking ◽  
Banking Services ◽  
Factors Affecting ◽  
Self Service ◽  
Acceptance Model ◽  
Self Service Technology

This study aims to (a) identify perception factors that affect current mobile banking (M-banking) consumers’ continuous use of the technology, (b) explain the self-service technology (STT) dimensions that affect customers’ behavioral intention, and (c) be able to offer recommendations to the banking industry or other organizations related to M-banking in terms of developing M-banking services in the future. Analyzed data were collected from 688 existing Thai M-banking users through online questionnaires. This study used the SPSS and AMOS statistical programs to analyze the data by applying structural equation modeling based on SSTs’ service qualities and the technology acceptance model (TAM). From the results, this analysis shows positive and significant relationships among SSTs’ service qualities, perception, and sustainable intention to use M-banking services. This study provides vital knowledge related to essential characteristics of M-banking as an STT that could assist banking institutions and application providers in enhancing their M-banking products. Moreover, this study adds to the knowledge area of SSTs’ service qualities in financial mobile application dimensions.

scholarly journals Factors affecting green food purchase intention in Ho Chi Minh city

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Nguyen Thi Thanh Van ◽  
Nguyen Thien Duy ◽  
Pham Tien Dung
Keyword(s):  
Technology Acceptance ◽  
Purchase Intention ◽  
Structural Equation ◽  
Perceived Usefulness ◽  
Ho Chi Minh City ◽  
Equation Modeling ◽  
Factors Affecting ◽  
Food Purchase ◽  
Green Food ◽  
Acceptance Model

This study adopts Theory of Planned Behavior (TPB) and Technology Acceptance Model (TAM) to measure factors affecting green food purchase intention in Ho Chi Minh city (HCMC). The survey data was collected from 197 students during the period of 1st to 20th September, 2017. Testing the conceptual model by Structural Equation Modeling (SEM), we find that perceived usefulness of green food and perceived ease of purchase impact on attitudes towards green food purchase. We also find that subjective norm, perceived usefulness of green food, attitudes towards green food purchase are positively associated with green food purchase intention. From the research findings, some recommendations are proposed accordingly.

Sign in / Sign up

Export Citation Format

Share Document