scholarly journals Carbon Dioxide Decomposition by a Parallel-Plate Plasma Reactor: Experiments and 2-D Modelling

2021 ◽  
Vol 11 (21) ◽  
pp. 10047
Author(s):  
Ali Barkhordari ◽  
Saeed Karimian ◽  
Antonio Rodero ◽  
Dorota Anna Krawczyk ◽  
Seyed Iman Mirzaei ◽  
...  
Keyword(s):  
Parallel Plate ◽  
Plasma Reactor ◽  
Optical Emission ◽  
Stark Broadening ◽  
The Finite Element Method ◽  
Temperature Plasma ◽  
Spatial Behaviors ◽  
D Model

The applicability of high voltage electrical discharges for the decomposition of CO2 has been extensively demonstrated. In this study, a new AC parallel-plate plasma reactor is presented which was designed for this purpose. Detailed experimental characterization and simulation of this reactor were performed. Gas chromatography of the exhaust gases enabled calculation of the CO2 conversion and energy efficiency. A conversion factor approximating 25% was obtained which is higher in comparison to existing plasma sources. Optical emission spectroscopy enabled the determination of the emission intensities of atoms and molecules inside the plasma and characterization of the discharge. The Stark broadening of the Balmer hydrogen line Hβ was used for the estimation of the electron density. The obtained densities were of the order of 5 × 1014 cm−3 which indicates that the electron kinetic energy dominated the discharge. The rotational, vibrational, and excitation temperatures were determined from the vibro-rotational band of the OH radical. A 2-temperature plasma was found where the estimated electron temperatures (~18000 K) were higher than the gas temperatures (~2000 K). Finally, a 2-D model using the fluid equations was developed for determining the main processes in the CO2 splitting. The solution to this model, using the finite element method, gave the temporal and spatial behaviors of the formed species densities, the electric potential, and the temperatures of electrons.

scholarly journals Comparison of Elemental Analysis Techniques for the Characterization of Commercial Alloys

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 736
Author(s):  
Peter Seidel ◽  
Doreen Ebert ◽  
Robert Schinke ◽  
Robert Möckel ◽  
Simone Raatz ◽  
...  
Keyword(s):  
Accurate Determination ◽  
Analytical Techniques ◽  
Optical Emission ◽  
Breakdown Spectroscopy ◽  
General Evaluation ◽  
Sample Composition ◽  
Laser Induced Breakdown ◽  
Copper Aluminum

Better quality control for alloy manufacturing and sorting of post-consumer scraps relies heavily on the accurate determination of their chemical composition. In recent decades, analytical techniques, such as X-ray fluorescence spectroscopy (XRF), laser-induced breakdown spectroscopy (LIBS), and spark optical emission spectroscopy (spark-OES), found widespread use in the metal industry, though only a few studies were published about the comparison of these techniques for commercially available alloys. Hence, we conducted a study on the evaluation of four analytical techniques (energy-dispersive XRF, wavelength-dispersive XRF, LIBS, and spark-OES) for the determination of metal sample composition. It focuses on the quantitative analysis of nine commercial alloys, representing the three most important alloy classes: copper, aluminum, and steel. First, spark-OES is proven to serve as a validation technique in the use of certified alloy reference samples. Following an examination of the lateral homogeneity by XRF, the results of the techniques are compared, and reasons for deviations are discussed. Finally, a more general evaluation of each technique with its capabilities and limitations is given, taking operation-relevant parameters, such as measurement speed and calibration effort, into account. This study shall serve as a guide for the routine use of these methods in metal producing and recycling industries.

State of Aircraft Turboshaft Engines by Means of Tribotechnical Diagnostic

2018 ◽  
Vol 35 (1) ◽  
pp. 11-16 ◽  
Author(s):  
Janka Mihalčová
Keyword(s):  
Chemical Elements ◽  
Friction Pair ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Rotating Disc ◽  
Quantitative Characterization ◽  
Qualitative And Quantitative ◽  
Friction Regime

AbstractThe contribution describes concrete example of application of tribotechnical methods for the determination of the bearing wear state in aircraft turboshaft engines. Tribotechnical methods, which will be mentioned, deal with qualitative and quantitative characterization of particles occurred in oil. Here belong method optical emission spectrometry method with rotating disc electrode for determination of chemical elements concentration in oil. Method of optical particles counting for detection of particles distribution according to their scale, determination of their number and ferrographic analysis. Exploitation of these methods make it possible to determine quickly and correctly the friction regime and wearing of friction pair that is washed by oil in observed engines.

Characterization of ultraintense laser produced fast electron propagation in insulatorsvs.conductors by optical emission diagnostics

2006 ◽  
Vol 133 ◽  
pp. 499-502 ◽  
Author(s):  
M. Manclossi ◽  
J. J. Santos ◽  
J. Faure ◽  
A. Guenmie-Tafo ◽  
D. Batani ◽  
...  
Keyword(s):  
Fast Electron ◽  
Optical Emission ◽  
Electron Propagation

Characterization of Impressed Current Technique to Model Corrosion of Reinforcement in Concrete

2020 ◽  
Vol 11 (1) ◽  
pp. 93-99
Author(s):  
Abu Zakir Morshed ◽  
Sheikh Shakib ◽  
Tanzim Jahin
Keyword(s):  
Immersion Time ◽  
Chloride Content ◽  
Engineering Science ◽  
Coastal Regions ◽  
Faraday’S Law ◽  
Current Technique ◽  
Corrosion Cell ◽  
Impressed Current

Corrosion of reinforcement is an important durability concern for the structures exposed to coastal regions. Since corrosion of reinforcement involves long periods of time, impressed current technique is usually used to accelerate the corrosion of reinforcement in laboratories. Characterization of impressed current technique was the main focus of this research,which involved determination of optimum chloride content and minimum immersion time of specimens for which the application of Faraday’s law could be efficient. To obtain optimum chloride content, the electrolytes in the corrosion cell were prepared similar to that of concrete pore solutions. Concrete prisms of 200 mm by 200 mm by 300 mm were used to determine the minimum immersion time for saturation. It was found that the optimum chloride content was 35 gm/L and the minimum immersion time for saturation was 140 hours. Accounting the results, a modified expression based on Faraday’s law was proposed to calculate weight loss due to corrosion. Journal of Engineering Science 11(1), 2020, 93-99

The Determination of Sense via Deleuze and Blanchot: Paradoxes of the Habitual, the Immemorial, and the Eternal Return

2008 ◽  
Vol 2 (2) ◽  
pp. 155-177 ◽  
Author(s):  
Eugene Brently Young
Keyword(s):  
Eternal Return

Eternal return is the paradox that accounts for the interplay between difference and repetition, a dynamic at the heart of Deleuze's philosophy, and Blanchot's approach to this paradox, even and especially through what it elides, further illuminates it. Deleuze draws on Blanchot's characterisations of difference, forgetting, and the unlivable to depict the ‘sense’ produced via eternal return, which, for Blanchot, is where repetition implicates or ‘carries’ pure difference. However, for Deleuze, difference and the unlivable are also developed by the living repetition or ‘contraction’ of habit, which results in his distinctive characterization of ‘force’, ‘levity’, and sense in eternal return.

Sign in / Sign up

Export Citation Format

Share Document