scholarly journals Hamstring Torque, Velocity and Power Elastic Band Measurements during Hip Extension and Knee Flexion

2021 ◽  
Vol 11 (22) ◽  
pp. 10509
Author(s):  
Dario Santos ◽  
Fernando Massa ◽  
Jorge Dominguez ◽  
Isabel Morales ◽  
Juan Del Castillo ◽  
...  

The quantitative dynamic monitoring of the performance of hamstring muscles during rehabilitation and training cannot currently be undertaken using elastic resistance bands. Hip extension with a fully extended knee involves hamstring agonists, while knee flexion involves only the hamstring. The purpose of this study is to provide normative values of torque, velocity and power involving hamstring muscles opposing elastic bands. Twenty amateur athletes aged 25.7 ± 4.9, were studied during two motor tasks—hip extension and knee flexion, both isometric & dynamic—with an elastic resistance band and DINABANG portable instrument. We compared the peak isometric torque in hip extension with agonists (2.93 Nm/kg) and without them (1.21 Nm/kg): the difference is significant. The peak angular limb velocity—starting at 50% of the maximum torque—is smaller in hip extension with agonists (215.96°/s) than in a knee flexion without them (452.56°/s). The combination of peak torque and peak velocity estimates power and there is no difference (p = 0.051) with and without agonists: 452.56°Nm/s.kg without agonists and 542.13°Nm/s.kg with them. This study opens the possibility of monitoring torque–velocity–power profiles for hamstring exercise in open chain.

2020 ◽  
Vol 72 (1) ◽  
pp. 51-59 ◽  
Author(s):  
Osamu Yanagisawa ◽  
Atsuki Fukutani

AbstractWe aimed to compare dynamic exercise performance between hip extension exercises with different knee angles and between knee flexion exercises with different hip angles, and to investigate the recruitment pattern of the hamstrings in each exercise. Seven men performed 4 isokinetic exercises (3 maximal concentric contractions at 30°/s (peak torque) and 30 maximal concentric contractions at 180°/s (total work)): hip extension with the knee fully extended (HEke) and with the knee flexed at 90° (HEkf) and knee flexion with the hip fully extended (KFhe) and with the hip flexed at 90° (KFhf). The recruitment pattern of the hamstrings was evaluated in each exercise using magnetic resonance imaging (T2 calculation). The HEke condition showed significantly greater peak torque than the HEkf condition (p < 0.05). The KFhf condition had significantly greater peak torque and total work values than the KFhe condition (p < 0.05). Although the biceps femoris long head, semitendinosus, and semimembranosus had significantly increased post-exercise T2 values in the HEke (p < 0.05), KFhe, and KFhf conditions (p < 0.01), the T2 increase values were significantly greater under the KFhf than the HEke condition (p < 0.05). The semitendinosus showed a significantly greater T2 increase value than other muscles under both KFhe and KFhf conditions (p < 0.05). Performance of hip extension and knee flexion exercises increases when the hamstring muscles are in a lengthened condition. The hamstring muscles (particularly the semitendinosus) are more involved in knee flexion than in hip extension.


2014 ◽  
Vol 9 (2) ◽  
pp. 358-361 ◽  
Author(s):  
Scott R. Brown ◽  
Matt Brughelli ◽  
Peter C. Griffiths ◽  
John B. Cronin

Purpose:While several studies have documented isokinetic knee strength in junior and senior rugby league players, investigations of isokinetic knee and hip strength in professional rugby union players are limited. The purpose of this study was to provide lower-extremity strength profiles and compare isokinetic knee and hip strength of professional rugby league and rugby union players.Participants:32 professional rugby league and 25 professional rugby union players.Methods:Cross-sectional analysis. Isokinetic dynamometry was used to evaluate peak torque and strength ratios of the dominant and nondominant legs during seated knee-extension/flexion and supine hip-extension/flexion actions at 60°/s.Results:Forwards from both codes were taller and heavier and had a higher body-mass index than the backs of each code. Rugby union forwards produced significantly (P < .05) greater peak torque during knee flexion in the dominant and nondominant legs (ES = 1.81 and 2.02) compared with rugby league forwards. Rugby league backs produced significantly greater hip-extension peak torque in the dominant and nondominant legs (ES = 0.83 and 0.77) compared with rugby union backs. There were no significant differences in hamstring-to-quadriceps ratios between code, position, or leg. Rugby union forwards and backs produced significantly greater knee-flexion-to-hip-extension ratios in the dominant and nondominant legs (ES = 1.49–2.26) than rugby union players.Conclusions:It seems that the joint torque profiles of players from rugby league and union codes differ, which may be attributed to the different demands of each code.


2013 ◽  
Vol 18 (4) ◽  
pp. 303-307 ◽  
Author(s):  
Sun-Young Kang ◽  
Hye-Seon Jeon ◽  
Ohyun Kwon ◽  
Heon-seock Cynn ◽  
Boram Choi

Author(s):  
Wootaek Lim

BACKGROUND: In clinical practice, knee flexion at the prone position for manual muscle testing of hamstrings and hip extension at the supine position for stretching of hamstring muscles are typically proposed. OBJECTIVE: Although different positions have been proposed for different purposes in hamstrings, the understanding of the changing the functional role of hamstrings with position changes is poorly understood. METHODS: The electromyographic (EMG) activity and hip extension force were compared among different postures; hip neutral, internal, and external rotation. EMG and force were measured in prone position during knee flexion and those were additionally measured in supine position during hip extension. In supine position, additional measurements were made in hip neutral, internal and external rotation. RESULTS: Hamstrings showed high EMG activity during knee flexion. Knee flexion force in prone position was significantly decreased at hip extension force in supine position. In supine position, EMG activity was significantly higher in semitendinosus (ST) than biceps femoris (BF) during internal rotation. CONCLUSIONS: It should be noted that bi-articular muscles may have different functional dependencies on the corresponding muscles for each joint. In addition, because the altered alignment of the hamstring muscles that was affected by hip rotation had a significant effect on muscle activity, and hip rotation may be helpful for selective training of medial or lateral hamstrings.


2020 ◽  
pp. 1-9
Author(s):  
Matthew S. Briggs ◽  
Claire Spech ◽  
Rachel King ◽  
Mike McNally ◽  
Matthew Paponetti ◽  
...  

Obese (OB) youth demonstrate altered knee mechanics and worse lower-extremity performance compared with healthy weight (HW) youth. Our objectives were to compare sagittal plane knee landing mechanics between OB and HW youth and to examine the associations of knee and hip extension peak torque with landing mechanics in OB youth. Twenty-four OB and 24 age- and sex-matched HW youth participated. Peak torque was measured and normalized to leg lean mass. Peak knee flexion angle and peak internal knee extension moment were measured during a single-leg hop landing. Paired t tests, Pearson correlation coefficients, and Bonferroni corrections were used. OB youth demonstrated worse performance and lower knee extension (OB: 12.76 [1.38], HW: 14.03 [2.08], P = .03) and hip extension (OB: 8.59 [3.13], HW: 11.10 [2.89], P = .005) peak torque. Furthermore, OB youth demonstrated lower peak knee flexion angles (OB: 48.89 [45.41 to 52.37], HW: 56.07 [52.59 to 59.55], P = .02) and knee extension moments (OB: −1.73 [−1.89 to −1.57], HW: −2.21 [−2.37 to −2.05], P = .0001) during landing compared with HW youth. Peak torque measures were not correlated with peak knee flexion angle nor internal knee extension moment during landing in either group (P > .01). OB youth demonstrated altered landing mechanics compared with HW youth. However, no associations among peak torque measurements and knee landing mechanics were present.


2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Krzysztof Małecki ◽  
Jarosław Fabiś ◽  
Paweł Flont ◽  
Anna Fabiś-Strobin ◽  
Kryspin Niedzielski

Abstract Background Biomechanical studies indicate that during outward rotation of the tibia and the valgus knee joint position, the patella is shifted in the lateral direction. After first-time patellar dislocation, the dynamic position of the femur in relation to the tibia plays an important role in joint stability, because the medial stabilizer of the patella (mostly the MPFL) is damaged or inefficient. The most important factor in controlling the rotational movement of the tibia in relation to the thigh are the hamstring muscles. The aim of the study therefore is to determine whether patients with patellar instability have a significant weakness in the knee flexor muscles, which can predispose to recurrent dislocations. This is an important consideration when planning the rehabilitation of patients with first-time patellar dislocation. Methods The study enrolled 33 patients with confirmed recurrent patellar dislocation, including six patients with bilateral involvement. In the study group, the hamstring muscles (both sides) were evaluated at velocities of 60 and 180 deg/s for the following parameters: peak torque, torque at 30 degrees of knee flexion, angle of peak torque and peak torque hamstring to quadriceps ratio (H/Q ratio). Results In the recurrent patellar dislocation group, a statistically significant weakness in knee flexors was observed for both angular velocities compared to age and gender normative data. No such relationship was observed in the control group of heathy subjects. In patients with one-sided dislocation, no differences were found in knee flexors peak torque, torque at 30 degrees of knee flexion, angle of peak torque or H/Q ratio between the healthy and affected limbs for either angular velocity. Conclusions In patients with recurrent patellar dislocation, knee flexors strength is decreased significantly in both the unaffected and affected limbs. This may indicate a constitutional weakening of these muscles which can predispose to recurrent dislocations. Trial registration The study was retrospectively registered on ClinicalTrials.gov (NCT04838158), date of registration; 22/03/2021.


2021 ◽  
Vol 4 (119) ◽  
pp. 31-39
Author(s):  
Donatas Januševičius ◽  
Audrius Sniečkus ◽  
Mantas Mickevičius ◽  
Danguolė Satkunskienė ◽  
Pornpimol Muanjai ◽  
...  

Background. A need for other methods of hamstring strengthening are thus warranted with the main aim of reducing the risk of injury during the subsequent intense athletic activities. The study aimed to examine changes in hamstring strength in response to high velocity elastic band training when incorporated into regular training routine of football players. Methods. Research participants were professional top level football players (age 23.1 ± 5.7 years; weight 77.2 ± 7.7 kg, training experience 14.1 ± 5.8 years). In the pre-season, in addition to their routine training, the experimental group performed hamstring curls at maximal intensity while lying prone three times per week for five weeks, while control group continued their routine training. Concentric knee torque at 60°/s and 180°/s angular velocities, countermovement jump height, 30m sprint running performance from standing and flying start, and knee flexion-extension movement frequency were measured before and after the 5 weeks of training. Results. Hamstring curl frequency during lying prone increase by 10.5 % (p < .05) in the experimental group and did not change in the control group. Peak torque for knee flexion and knee extension, jump height and sprint running performance did not change significantly in any group (p > .05). Conclusion. High velocity elastic band training incorporated into regular pre-season routine is beneficial for football players to increase their knee extension-flexion maximal movement frequency with no evident effects on strength, jump and sprint running performance. Results might be related with concurrent training during preparatory training phase of the pre-season when several physical capacities are being developed simultaneously. Keywords: high speed movements; peak torque; sprint performance; prevention of hamstring injuries; knee flexion strength.


1999 ◽  
Vol 4 (1) ◽  
pp. 6-7
Author(s):  
James J. Mangraviti

Abstract The accurate measurement of hip motion is critical when one rates impairments of this joint, makes an initial diagnosis, assesses progression over time, and evaluates treatment outcome. The hip permits all motions typical of a ball-and-socket joint. The hip sacrifices some motion but gains stability and strength. Figures 52 to 54 in AMA Guides to the Evaluation of Permanent Impairment (AMA Guides), Fourth Edition, illustrate techniques for measuring hip flexion, loss of extension, abduction, adduction, and external and internal rotation. Figure 53 in the AMA Guides, Fourth Edition, illustrates neutral, abducted, and adducted positions of the hip and proper alignment of the goniometer arms, and Figure 52 illustrates use of a goniometer to measure flexion of the right hip. In terms of impairment rating, hip extension (at least any beyond neutral) is irrelevant, and the AMA Guides contains no figures describing its measurement. Figure 54, Measuring Internal and External Hip Rotation, demonstrates proper positioning and measurement techniques for rotary movements of this joint. The difference between measured and actual hip rotation probably is minimal and is irrelevant for impairment rating. The normal internal rotation varies from 30° to 40°, and the external rotation ranges from 40° to 60°.


Sign in / Sign up

Export Citation Format

Share Document