scholarly journals FE-Aided Synchronization Analysis of Line-Start Synchronous Reluctance Motors

2021 ◽  
Vol 11 (24) ◽  
pp. 11673
Author(s):  
Un-Jae Seo ◽  
Dong-Jun Kim ◽  
Pil-Wan Han ◽  
Yon-Do Chun
Keyword(s):  
Steady State ◽  
Analytical Approach ◽  
High Efficiency ◽  
Induction Motors ◽  
Permanent Magnet Motors ◽  
Element Analysis ◽  
High Power Factor ◽  
Equivalent Circuit Parameters ◽  
Torque Analysis ◽  
Rotor Cage

Since line-start synchronous permanent magnet motors (LSPMs) entered the market, they have attracted research interest toward counterpart induction motors of low power-ratings. This paper reports an investigation of line-start synchronous reluctance motors (LS-SynRMs). LS-SynRMs has not been investigated as much as LSPMs have. A motor needs to maximize rotor saliency to achieve high efficiency and a high power-factor. This results in complicated rotor geometry because the rotor cage and multiple flux barriers share the same rotor space. This paper provides an approximate method based on steady state torque analysis by which to estimate the critical inertia of a LS-SynRM. A finite element analysis (FEA)-aided analytical approach to the approximation of steady state torque is proposed to replace the more typical approach based on equivalent circuit parameters. The critical inertia resulting from the proposed method is compared to the results obtained using the FEA.

scholarly journals Synchronous Reluctance Motor vs. Induction Motor at Low-Power Industrial Applications: Design and Comparison

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2190 ◽  
Author(s):  
Nezih Gokhan Ozcelik ◽  
Ugur Emre Dogru ◽  
Murat Imeryuz ◽  
Lale T. Ergene
Keyword(s):  
Low Power ◽  
Permanent Magnet ◽  
Induction Motors ◽  
Power Level ◽  
Industrial Applications ◽  
Permanent Magnet Motors ◽  
Element Analysis ◽  
Synchronous Reluctance Motor ◽  
Three Phase ◽  
Reluctance Motor

Although three-phase induction motors are the most common motor type in industry, a growing interest has arisen in emerging electric motor technologies like synchronous reluctance motors and permanent magnet motors. Synchronous reluctance motors are a step forward compared to permanent magnet motors when the cost of the system is considered. The main focus of this study is low-power industrial applications, which generally use three-phase induction motors. In this study, the synchronous reluctance motor family is compared at three different power levels: 2.2 kW, 4 kW, and 5.5 kW. The aim of this study is to design and compare synchronous reluctance motors, which can be alternative to the reference induction motors. Finite element analysis is performed for the reference induction motors initially. Their stators are kept the same and the rotors are redesigned to satisfy output power requirements of the induction motors. Detailed design, analysis, and optimization processes are applied to the synchronous reluctance motors considering efficiency, power density, and manufacturing. The results are evaluated, and the optimized designs are chosen for each power level. They are prototyped and tested to measure their performance.

Finite Element Modeling for Steel Cord Analysis in Radial Tires

2013 ◽  
Vol 41 (1) ◽  
pp. 60-79 ◽  
Author(s):  
Wei Yintao ◽  
Luo Yiwen ◽  
Miao Yiming ◽  
Chai Delong ◽  
Feng Xijin
Keyword(s):  
Finite Element ◽  
High Efficiency ◽  
Force Measurement ◽  
Three Dimensional ◽  
Local Stress ◽  
Tension Force ◽  
Center Line ◽  
Element Analysis ◽  
Design Variables ◽  
Steel Cord

ABSTRACT: This article focuses on steel cord deformation and force investigation within heavy-duty radial tires. Typical bending deformation and tension force distributions of steel reinforcement within a truck bus radial (TBR) tire have been obtained, and they provide useful input for the local scale modeling of the steel cord. The three-dimensional carpet plots of the cord force distribution within a TBR tire are presented. The carcass-bending curvature is derived from the deformation of the carcass center line. A high-efficiency modeling approach for layered multistrand cord structures has been developed that uses cord design variables such as lay angle, lay length, and radius of the strand center line as input. Several types of steel cord have been modeled using the developed method as an example. The pure tension for two cords and the combined tension bending under various loading conditions relevant to tire deformation have been simulated by a finite element analysis (FEA). Good agreement has been found between experimental and FEA-determined tension force-displacement curves, and the characteristic structural and plastic deformation phases have been revealed by the FE simulation. Furthermore, some interesting local stress and deformation patterns under combined tension and bending are found that have not been previously reported. In addition, an experimental cord force measurement approach is included in this article.

Prediction of Tire Tread Wear with FEM Steady State Rolling Contact Simulation

2003 ◽  
Vol 31 (3) ◽  
pp. 189-202 ◽  
Author(s):  
D. Zheng
Keyword(s):  
Weight Loss ◽  
Steady State ◽  
Cross Section ◽  
Rolling Contact ◽  
Dynamic Simulations ◽  
Element Analysis ◽  
Vehicle Acceleration ◽  
Steady State Rolling ◽  
Driving Conditions ◽  
Rate Profile

Abstract A procedure based on steady state rolling contact Finite Element Analysis (FEM) has been developed to predict tire cross section tread wear profile under specified vehicle driving conditions. This procedure not only considers the tire construction effects, it also includes the effects of materials, vehicle setup, test course, and driver's driving style. In this algorithm, the vehicle driving conditions are represented by the vehicle acceleration histogram. Vehicle dynamic simulations are done to transform the acceleration histogram into tire loading condition distributions for each tire position. Tire weight loss rates for different vehicle accelerations are generated based on a steady state rolling contact simulation algorithm. Combining the weight loss rate and the vehicle acceleration histogram, nine typical tire loading conditions are chosen with different weight factors to represent tire usage conditions. It is discovered that the tire tread wear rate profile is changing continuously as the tire is worn. Simulation of a new tire alone cannot be used to predict the tire cross-section tread wear profile. For this reason, an incremental tread wear simulation procedure is performed to predict the tire cross section tread wear profile. Compared with actual tire cross-section tread wear profiles, good results are obtained from the simulations.

Sign in / Sign up

Export Citation Format

Share Document