scholarly journals Hurricane Boundary Layer Height Relative to Storm Motion from GPS Dropsonde Composites

Atmosphere ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 339 ◽  
Author(s):  
Yifang Ren ◽  
Jun A. Zhang ◽  
Stephen R. Guimond ◽  
Xiang Wang
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Mixed Layer ◽  
Mixed Layer Depth ◽  
Layer Depth ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Tangential Wind ◽  
Hurricane Boundary Layer ◽  
The Right

This study investigates the asymmetric distribution of hurricane boundary layer height scales in a storm-motion-relative framework using global positioning system (GPS) dropsonde observations. Data from a total of 1916 dropsondes collected within four times the radius of maximum wind speed of 37 named hurricanes over the Atlantic basin from 1998 to 2015 are analyzed in the composite framework. Motion-relative quadrant mean composite analyses show that both the kinematic and thermodynamic boundary layer height scales tend to increase with increasing radius in all four motion-relative quadrants. It is also found that the thermodynamic mixed layer depth and height of maximum tangential wind speed are within the inflow layer in all motion-relative quadrants. The inflow layer depth and height of the maximum tangential wind are both found to be deeper in the two front quadrants, and they are largest in the right-front quadrant. The difference in the thermodynamic mixed layer depth between the front and back quadrants is smaller than that in the kinematic boundary layer height. The thermodynamic mixed layer is shallowest in the right-rear quadrant, which may be due to the cold wake phenomena. The boundary layer height derived using the critical Richardson number ( R i c ) method shows a similar front-back asymmetry as the kinematic boundary layer height.

scholarly journals On the Characteristic Height Scales of the Hurricane Boundary Layer

2011 ◽  
Vol 139 (8) ◽  
pp. 2523-2535 ◽  
Author(s):  
Jun A. Zhang ◽  
Robert F. Rogers ◽  
David S. Nolan ◽  
Frank D. Marks
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Mixed Layer ◽  
Layer Structure ◽  
Mixed Layer Depth ◽  
Layer Depth ◽  
Layer Height ◽  
Boundary Layer Structure ◽  
Boundary Layer Height ◽  
Hurricane Boundary Layer

AbstractIn this study, data from 794 GPS dropsondes deployed by research aircraft in 13 hurricanes are analyzed to study the characteristic height scales of the hurricane boundary layer. The height scales are defined in a variety of ways: the height of the maximum total wind speed, the inflow layer depth, and the mixed layer depth. The height of the maximum wind speed and the inflow layer depth are referred to as the dynamical boundary layer heights, while the mixed layer depth is referred to as the thermodynamical boundary layer height. The data analyses show that there is a clear separation of the thermodynamical and dynamical boundary layer heights. Consistent with previous studies on the boundary layer structure in individual storms, the dynamical boundary layer height is found to decrease with decreasing radius to the storm center. The thermodynamic boundary layer height, which is much shallower than the dynamical boundary layer height, is also found to decrease with decreasing radius to the storm center. The results also suggest that using the traditional critical Richardson number method to determine the boundary layer height may not accurately reproduce the height scale of the hurricane boundary layer. These different height scales reveal the complexity of the hurricane boundary layer structure that should be captured in hurricane model simulations.

scholarly journals Asymmetric Hurricane Boundary Layer Structure from Dropsonde Composites in Relation to the Environmental Vertical Wind Shear

2013 ◽  
Vol 141 (11) ◽  
pp. 3968-3984 ◽  
Author(s):  
Jun A. Zhang ◽  
Robert F. Rogers ◽  
Paul D. Reasor ◽  
Eric W. Uhlhorn ◽  
Frank D. Marks
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Mixed Layer ◽  
Wind Shear ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Asymmetric Structure ◽  
Layer Depth ◽  
Tangential Wind ◽  
Hurricane Boundary Layer

Abstract This study investigates the asymmetric structure of the hurricane boundary layer in relation to the environmental vertical wind shear in the inner core region. Data from 1878 GPS dropsondes deployed by research aircraft in 19 hurricanes are analyzed in a composite framework. Kinematic structure analyses based on Doppler radar data from 75 flights are compared with the dropsonde composites. Shear-relative quadrant-mean composite analyses show that both the kinematic and thermodynamic boundary layer height scales tend to decrease with decreasing radius, consistent with previous axisymmetric analyses. There is still a clear separation between the kinematic and thermodynamic boundary layer heights. Both the thermodynamic mixed layer and height of maximum tangential wind speed are within the inflow layer. The inflow layer depth is found to be deeper in quadrants downshear, with the downshear right (DR) quadrant being the deepest. The mixed layer depth and height of maximum tangential wind speed are alike at the eyewall, but are deeper outside in quadrants left of the shear. The results also suggest that air parcels acquire equivalent potential temperature θe from surface fluxes as they rotate through the upshear right (UR) quadrant from the upshear left (UL) quadrant. Convection is triggered in the DR quadrant in the presence of asymmetric mesoscale lifting coincident with a maximum in θe. Energy is then released by latent heating in the downshear left (DL) quadrant. Convective downdrafts bring down cool and dry air to the surface and lower θe again in the DL and UL quadrants. This cycling process may be directly tied to shear-induced asymmetry of convection in hurricanes.

scholarly journals An Observational Study of the Symmetric Boundary Layer Structure and Tropical Cyclone Intensity

Atmosphere ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 158 ◽  
Author(s):  
Yifang Ren ◽  
Jun A. Zhang ◽  
Jonathan L. Vigh ◽  
Ping Zhu ◽  
Hailong Liu ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Tropical Cyclone ◽  
Layer Structure ◽  
Mixed Layer Depth ◽  
Layer Depth ◽  
Storm Intensity ◽  
Boundary Layer Structure ◽  
Warm Core ◽  
Tangential Wind

This study analyses Global Positioning System dropsondes to document the axisymmetric tropical cyclone (TC) boundary-layer structure, based on storm intensity. A total of 2608 dropsondes from 42 named TCs in the Atlantic basin from 1998 to 2017 are used in the composite analyses. The results show that the axisymmetric inflow layer depth, the height of maximum tangential wind speed, and the thermodynamic mixed layer depth are all shallower in more intense TCs. The results also show that more intense TCs tend to have a deep layer of the near-saturated air inside the radius of maximum wind speed (RMW). The magnitude of the radial gradient of equivalent potential temperature (θe) near the RMW correlates positively with storm intensity. Above the inflow layer, composite structures of TCs with different intensities all possess a ring of anomalously cool temperatures surrounding the warm-core, with the magnitude of the warm-core anomaly proportional to TC intensity. The boundary layer composites presented here provide a climatology of how axisymmetric TC boundary layer structure changes with intensity.

scholarly journals Study of the Boundary Layer Structure of a Landfalling Typhoon Based on the Observation from Multiple Ground-Based Doppler Wind Lidars

2021 ◽  
Vol 13 (23) ◽  
pp. 4810
Author(s):  
Wenhao Shi ◽  
Jie Tang ◽  
Yonghang Chen ◽  
Nuo Chen ◽  
Qiong Liu ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Layer Structure ◽  
Horizontal Wind ◽  
China Meteorological Administration ◽  
Layer Height ◽  
Boundary Layer Structure ◽  
Boundary Layer Height ◽  
Tangential Wind ◽  
Typhoon Center

The boundary layer structure is crucial to the formation and intensification of typhoons, but there is still a lack of high-precision turbulence observations in the typhoon boundary layer due to limitations of the observing instruments under typhoon conditions. Using joint observations from multiple ground-based Doppler wind lidars (DWL) collected by the Shanghai Typhoon Institute of China Meteorological Administration (CMA) during the transit of Typhoon Lekima (8–11 August 2019), the characteristics of the wind field and physical quantities (including turbulent kinetic energy (TKE) and typhoon boundary layer height (TBLH)) of the boundary layer of typhoon Lekima were analyzed. The magnitude of TKE was shown to be related not only to the horizontal wind speed but also to the presence of a strong downdraft, which leads to a rapid increase of TKE. The magnitudes of TKE in different quadrants of Typhoon Lekima were also found to differ. The TKE in the front right quadrant of the typhoon was 2.5–6.0 times that in the rear left quadrant and ~1.7 times that in the rear right quadrant. The TKE over the island was larger than that over the urban area. Before Typhoon Lekima made landfall, the TKE increased with decreasing distance to the typhoon center. After typhoon landfall, the TKE changes were different on the left and right sides of the typhoon center, with the TKE on the left decreasing rapidly, while that on the right changed little. The typhoon boundary layer height calculated by five methods was compared and was found to decrease gradually before typhoon landfall and increased gradually afterward. The trends of the TBLH calculated using helicity and TKE were consistent, and both determine the TBLH well, while the maximum tangential wind speed height (humax) was larger than the height calculated by other methods. This study confirms that DWL has a strong detecting capability for the finescale structure of the typhoon boundary layer and provides a powerful tool for the validation of numerical simulations of typhoon structure.

scholarly journals Set of Algorithms and Techniques for Accurate 3D, Single Beam – Single Pointing, Lidar Measurements for Slant Range Visibility, Planetary Boundary Layer Height and Wind Speed Retrieval, Atmospheric Layers Spatial Distribution and Categorization in Real Time

2020 ◽  
Vol 237 ◽  
pp. 02031
Author(s):  
Alexandros Pantazis ◽  
Alexandros Papayannis
Keyword(s):  
Boundary Layer ◽  
Spatial Distribution ◽  
Wind Speed ◽  
Real Time ◽  
Planetary Boundary Layer ◽  
Planetary Boundary Layer Height ◽  
Layer Height ◽  
Single Beam ◽  
Slant Range ◽  
Boundary Layer Height

In this work, a full set of recently developed algorithms and techniques is presented, for a single beam-single pointing lidar to be able to perform operational and independent accurate 3 Dimensional (3D) measurements, for slant range visibility, wind speed retrieval, atmospheric layers spatial distribution and categorization, as well as Planetary Boundary Layer Height (PBLH) retrieval, in real or Near Real Time (NRT).The idea behind this development was for any single lidar to be able to perform a set of accurately measured products, either mobile or stationary, with or without network connectivity with other sensors for data-information exchange. The products were determined by the needs of lidar remote scientific and commercial community, in order to be even more attractive and valuable to atmospheric scientists, meteorologists, aviation and shipping safety operators, as well as to the Space lidar community.

Turbulence Structure of the Hurricane Boundary Layer between the Outer Rainbands

2009 ◽  
Vol 66 (8) ◽  
pp. 2455-2467 ◽  
Author(s):  
Jun A. Zhang ◽  
William M. Drennan ◽  
Peter G. Black ◽  
Jeffrey R. French
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Turbulent Kinetic Energy ◽  
Energy Budget ◽  
Specific Humidity ◽  
Turbulent Kinetic Energy Budget ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Kinetic Energy Budget ◽  
Hurricane Boundary Layer

Abstract As part of the Coupled Boundary Layers Air–Sea Transfer (CBLAST)-Hurricane program, flights were conducted to directly measure turbulent fluxes and turbulence properties in the high-wind boundary layer of hurricanes between the outer rainbands. For the first time, vertical profiles of normalized momentum fluxes, sensible heat and humidity fluxes, and variances of three-dimensional wind velocities and specific humidity are presented for the hurricane boundary layer with surface wind speeds ranging from 20 to 30 m s−1. The turbulent kinetic energy budget is estimated, indicating that the shear production and dissipation are the major source and sink terms, respectively. The imbalance in the turbulent kinetic energy budget indicates that the unmeasured terms, such as horizontal advection, may be important in hurricane boundary layer structure and dynamics. Finally, the thermodynamic boundary layer height, estimated based on the virtual potential temperature profiles, is roughly half of the boundary layer height estimated from the momentum flux profiles. The latter height where momentum and humidity fluxes tend to vanish is close to that of the inflow layer and also of the maximum in the tangential velocity profiles.

scholarly journals Buoyancy-Forced Downwelling in Boundary Currents

2008 ◽  
Vol 38 (12) ◽  
pp. 2704-2721 ◽  
Author(s):  
Michael A. Spall
Keyword(s):  
Boundary Layer ◽  
Wave Propagation ◽  
Heat Loss ◽  
Mixed Layer ◽  
General Circulation ◽  
Mixed Layer Depth ◽  
Kelvin Wave ◽  
Surface Cooling ◽  
Layer Depth ◽  
Boundary Currents

Abstract The issue of downwelling resulting from surface buoyancy loss in boundary currents is addressed using a high-resolution, nonhydrostatic numerical model. It is shown that the net downwelling is determined by the change in the mixed layer density along the boundary. For configurations in which the density on the boundary increases in the direction of Kelvin wave propagation, there is a net downwelling within the domain. For cases in which the density decreases in the direction of Kelvin wave propagation, cooling results in a net upwelling within the domain. Symmetric instability within the mixed layer drives an overturning cell in the interior, but it does not contribute to the net vertical motion. The net downwelling is determined by the geostrophic flow toward the boundary and is carried downward in a very narrow boundary layer of width E1/3, where E is the Ekman number. For the calculations here, this boundary layer is O(100 m) wide. A simple model of the mixed layer temperature that balances horizontal advection with surface cooling is used to predict the net downwelling and its dependence on external parameters. This model shows that the net sinking rate within the domain depends not only on the amount of heat loss at the surface but also on the Coriolis parameter, the mixed layer depth (or underlying stratification), and the horizontal velocity. These results indicate that if one is to correctly represent the buoyancy-forced downwelling in general circulation models, then it is crucial to accurately represent the velocity and mixed layer depth very close to the boundary. These results also imply that processes that lead to weak mixing within a few kilometers of the boundary, such as ice formation or freshwater runoff, can severely limit the downwelling forced by surface cooling, even if there is strong heat loss and convection farther offshore.

Sign in / Sign up

Export Citation Format

Share Document