scholarly journals Fenton Degradation of Ofloxacin Using a Montmorillonite–Fe3O4 Composite

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 177
Author(s):  
Alamri Rahmah Dhahawi Ahmad ◽  
Saifullahi Shehu Imam ◽  
Wen Da Oh ◽  
Rohana Adnan
Keyword(s):  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
Solar Irradiation ◽  
Precipitation Process ◽  
Solution Ph ◽  
Significant Drop ◽  
X Ray ◽  
Subsequent Degradation ◽  
Co Precipitation ◽  
Adsorption Desorption

In this work, FeM composites consisting of montmorillonite and variable amounts of Fe3O4 were successfully synthesized via a facile co-precipitation process. They were characterized using X-ray photoelectron spectroscopy (XPS), a field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDX), a transmission electron microscope (TEM), N2 adsorption–desorption, and Fourier transform infrared spectroscopy (FTIR) techniques to explain the effect of Fe3O4 content on the physicochemical properties of the Fe3O4–montmorillonite (FeM) composites. The FeM composites were subsequently used as heterogeneous Fenton catalysts to activate green oxidant (H2O2) for the subsequent degradation of ofloxacin (OFL) antibiotic. The efficiency of the FeM composites was studied by varying various parameters of Fe3O4 loading on montmorillonite, catalyst dosage, initial solution pH, initial OFL concentration, different oxidants, H2O2 dosage, reaction temperature, inorganic salts, and solar irradiation. Under the conditions of 0.75 g/L FeM-10, 5 mL/L H2O2, and natural pH, almost 81% of 50 mg/L of OFL was degraded within 120 min in the dark, while total organic carbon (TOC) reduction was about 56%. Although FeM composites could be a promising heterogeneous catalyst for the activation of H2O2 to degrade organic pollutants, including OFL antibiotic, the FeM-10 composite shows a significant drop in efficiency after five cycles, which indicates that more studies to improve this weakness should be conducted.

scholarly journals Fenton Degradation of Ofloxacin Using a Montmorillonite-Fe3O4 Composite

2020 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Alamri Rahmah Dhahawi Ahmad ◽  
Saifullahi Shehu Imam ◽  
Wen Da Oh ◽  
Rohana Adnan
Keyword(s):  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
High Efficiency ◽  
Solar Irradiation ◽  
Precipitation Process ◽  
Wastewater Remediation ◽  
Solution Ph ◽  
X Ray ◽  
Subsequent Degradation ◽  
Co Precipitation

In this work, FeM composites consisting of montmorillonite and variable amounts of Fe3O4 were successfully synthesized via a facile co-precipitation process. They were characterized using X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), N2 adsorption-desorption, and Fourier transform infrared spectroscopy (FT-IR) techniques to explain the effect of Fe3O4 content on the physicochemical properties of the Fe3O4-montmorillonite (FeM) composites. The FeM composites were subsequently used as heterogeneous Fenton catalysts to activate green oxidant (H2O2) for the subsequent degradation of ofloxacin (OFL) antibiotic. The efficiency of the FeM composites was studied by varying various parameters of Fe3O4 loading on montmorillonite, catalyst dosage, initial solution pH, initial OFL concentration, different oxidants, H2O2 dosage, reaction temperature, inorganic salts, and solar irradiation. Under the conditions of 0.75 g/L FeM-10, 5 mL/L H2O2, and natural pH, almost 81% of 50 mg/L of OFL was removed within 120 min in the dark, while total organic carbon (TOC) reduction was about 56%. Moreover, the FeM-10 composite maintained high efficiency and was stable even after four continuous cycles, making it a promising candidate in real wastewater remediation.

scholarly journals Preparation and characterization of iron-copper binary oxide and its effective removal of antimony(III) from aqueous solution

2016 ◽  
Vol 74 (2) ◽  
pp. 393-401 ◽  
Author(s):  
Yongchao Li ◽  
Bing Geng ◽  
Xiaoxian Hu ◽  
Bozhi Ren ◽  
Andrew S. Hursthouse
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Binary Oxide ◽  
Molar Ratio ◽  
Precipitation Process ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
X Ray ◽  
Freundlich Adsorption Isotherm ◽  
Co Precipitation

An Fe-Cu binary oxide was fabricated through a simple co-precipitation process, and was used to remove Sb(III) from aqueous solution. X-ray diffraction, scanning electron microscopy, energy dispersive X-ray and N2 adsorption–desorption measurements demonstrated that the Fe-Cu binary oxide consisted of poorly ordered ferrihydrite and CuO, and its specific surface area was higher than both iron oxide and copper oxide. A comparative test indicated that Fe/Cu molar ratio of prepared binary oxide greatly influenced Sb(III) removal and the optimum Fe/Cu molar ratio was about 3/1. Moreover, a maximum adsorption capacity of 209.23 mg Sb(III)/g Fe-Cu binary oxide at pH 5.0 was obtained. The removal of Sb(III) by Fe-Cu binary oxide followed the Freundlich adsorption isotherm and the pseudo-second-order kinetics in the batch study. The removal of Sb(III) was not sensitive to solution pH. In addition, the release of Fe and Cu ions to water was very low when the pH was greater than 6.0. X-ray photoelectron spectroscopy analysis confirmed that the Sb(III) adsorbed on the surface was not oxidized to Sb(V).

scholarly journals Synthesis of DME by CO2 hydrogenation over La2O3-modified CuO-ZnO-ZrO2/HZSM-5 catalysts

2017 ◽  
Vol 23 (1) ◽  
pp. 49-56 ◽  
Author(s):  
Yajing Zhang ◽  
Yu Zhang ◽  
Fu Ding ◽  
Kangjun Wang ◽  
Wang Xiaolei ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Direct Synthesis ◽  
Catalytic Performance ◽  
Co2 Hydrogenation ◽  
Precipitation Method ◽  
X Ray ◽  
Temperature Programmed ◽  
And Performance ◽  
Co Precipitation ◽  
Adsorption Desorption

A series of La2O3-modified CuO-ZnO-ZrO2/HZSM-5 catalysts were prepared by an oxalate co-precipitation method. The catalysts were fully characterized by X-ray diffraction (XRD), N2 adsorption-desorption, hydrogen temperature pro-grammed reduction (H2-TPR), ammonia temperature programmed desorption (NH3-TPD), and X-ray photoelectron spectroscopy (XPS) techniques. The effect of the La2O3 content on the structure and performance of the catalysts was thoroughly investigated. The catalysts were evaluated for the direct synthesis of dimethyl ether (DME) from CO2 hydrogenation. The results displayed that La2O3 addition enhanced catalytic performance, and the maximal CO2 conversion (34.3%) and DME selectivity (57.3%) were obtained over the catalyst with 1% La2O3, which due to the smaller size of Cu species and a larger ratio of Cu+/Cu.

scholarly journals Synthesis and Characterization of CuFe2O4 Nanoparticles Modified with Polythiophene: Applications to Mercuric Ions Removal

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 586 ◽  
Author(s):  
Ayman H. Kamel ◽  
Amr A. Hassan ◽  
Abd El-Galil E. Amr ◽  
Hadeel H. El-Shalakany ◽  
Mohamed A. Al-Omar
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Transmission Electron ◽  
Enhanced Adsorption ◽  
Co Precipitation ◽  
Adsorption Desorption

In this research, CuFe2O4 nanoparticles were synthesized by co-precipitation methods and modified by coating with thiophene for removal of Hg(II) ions from aqueous solution. CuFe2O4 nanoparticles, with and without thiophene, were characterized by x-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), energy dispersive x-ray (EDX), high-resolution transmission electron microscopy (HRTEM) and Brunauer–Emmett–Teller (BET). Contact time, adsorbent dose, solution pH, adsorption kinetics, adsorption isotherm and recyclability were studied. The maximum adsorption capacity towards Hg2+ ions was 7.53 and 208.77 mg/g for CuFe2O4 and CuFe2O4@Polythiophene composite, respectively. Modification of CuFe2O4 nanoparticles with thiophene revealed an enhanced adsorption towards Hg2+ removal more than CuFe2O4 nanoparticles. The promising adsorption performance of Hg2+ ions by CuFe2O4@Polythiophene composite generates from soft acid–soft base strong interaction between sulfur group of thiophene and Hg(II) ions. Furthermore, CuFe2O4@Polythiophene composite has both high stability and reusability due to its removal efficiency, has no significant decrease after five adsorption–desorption cycles and can be easily removed from aqueous solution by external magnetic field after adsorption experiments took place. Therefore, CuFe2O4@Polythiophene composite is applicable for removal Hg(II) ions from aqueous solution and may be suitable for removal other heavy metals.

scholarly journals Synthesis and Characterization of Fe0.8Mn0.2Fe2O4 Ferrite Nanoparticle with High Saturation Magnetization via the Surfactant Assisted Co-Precipitation

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 876
Author(s):  
Kornkanok Rotjanasuworapong ◽  
Wanchai Lerdwijitjarud ◽  
Anuvat Sirivat
Keyword(s):  
Electron Microscope ◽  
Saturation Magnetization ◽  
Photoelectron Spectroscopy ◽  
Sodium Dodecyl ◽  
Ferrite Nanoparticles ◽  
Ferromagnetic Behavior ◽  
X Ray ◽  
Ferrite Nanoparticle ◽  
Co Precipitation ◽  
Surfactant Assisted

Manganese ferrite nanoparticles (MnFe2O4) were synthesized via surfactant-assisted co-precipitation, where sodium dodecyl sulfate (SDS) was used as the template to control particle size at various SDS concentrations. The substitutions of iron (II) (Fe2+) into the MnFe2O4 ferrite nanoparticles were carried out to obtain Fe(1–x)MnxFe2O4, with various Mn2+: Fe2+ molar ratios. The synthesized ferrite nanoparticles were characterized by the Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD), energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscope (TEM), two-point probe, and vibrating sample magnetometer (VSM) techniques. The experimental Mn:Fe mole ratios of the Fe(1−x)MnxFe2O4 ferrite nanoparticles were verified to be in agreement with the theoretical values. The synthesized MnFe2O4 and Fe(1−x)MnxFe2O4 ferrite nanoparticles were of mixed spinel structures, with average spherical particle sizes between 17–22 nm, whereas the magnetite ferrite nanoparticles (Fe3O4) were of the inverse spinel structure. They showed soft ferromagnetic behavior. The synthesized Fe0.8Mn0.2Fe2O4 ferrite nanoparticle possessed the highest saturation magnetization of 88 emu/g relative to previously reported work to date.

scholarly journals CeO2:Mn3O4 Catalytic Micro-Converters Tuned for CH4 Detection Based on Catalytic Combustion under Real Operating Conditions

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2196
Author(s):  
Cristian E. Simion ◽  
Ovidiu G. Florea ◽  
Mihaela Florea ◽  
Florentina Neaţu ◽  
Ştefan Neaţu ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Normal Pressure ◽  
Operating Regime ◽  
Operating Conditions ◽  
Molar Ratio ◽  
Atmospheric Conditions ◽  
X Ray ◽  
Temperature Programmed ◽  
Co Precipitation ◽  
Adsorption Desorption

Mesoporous CeO2:Mn3O4 materials (3:7 and 7:3 molar ratio) were prepared by co-precipitation and deposited as porous thick films over alumina (Al2O3) planar substrate provided with Pt meander. The aim was oriented towards detecting low levels methane (CH4) at moderate operating temperatures. Herein we demonstrated that the sensitivity of catalytic micro-converters (CMCs) towards a given peak of CH4 concentration corresponds to specific gas-surface interaction phenomena. More precisely, a transition from thermal conductivity to combustion rate is likely to occur when CMCs are operated under real atmospheric conditions (normal pressure, presence of relative humidity, and constant operating temperature). The response to CH4 was analyzed over different gas flows and different gas concentrations under the same operating regime. The materials were fully characterized by adsorption-desorption isotherms, H2-Temperature Programmed Reduction (H2-TPR), X-ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy (SEM), and Raman spectroscopies. Thus, the applicative aspect of using CeO2:Mn3O4 as moderate temperature CMC for CH4 detection is brought to the fore.

scholarly journals Crystalline/Amorphous Blend Identification from Cobalt Adsorption by Layered Double Hydroxides

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1706 ◽  
Author(s):  
Lin Chi ◽  
Zheng Wang ◽  
Yuan Sun ◽  
Shuang Lu ◽  
Yan Yao
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Ph Value ◽  
Precipitation Process ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Inductively Coupled ◽  
Co Precipitation ◽  
Double Hydroxide ◽  
Double Hydroxides

In this study, the adsorption behavior of CaAl-Cl layered double hydroxide (CaAl-Cl-LDH) with a controlled pH value (pH = 6) on Co(II) ions ([Co] = 8 mM) is investigated. The comprehensively accepted mechanism of cobalt adsorption on LDH is considered to be co-precipitation, and the final adsorbed products are normally crystalline Co-LDH. One unanticipated finding is that crystalline/amorphous blends are found in the X-ray diffraction (XRD) pattern of Co-adsorbed LDH. To shed light on the adsorption products and the mechanisms in the adsorption process of Co(II) in an aqueous solution by CaAl-Cl-LDH, a series of testing methods including Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM), High-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma (ICP) are applied to clarify the interaction between cobalt and CaAl-Cl-LDH. According to the comprehensive analysis, the formation of the crystalline/amorphous blends corresponds to two adsorption mechanisms. The crystalline phases are identified as Co6Al2CO3(OH)16·4H2O, which is attributed to the co-precipitation process occurring in the interaction between Co(II) and CaAl-Cl-LDH. The formation of the amorphous phases is due to surface complexation on amorphous Al(OH)3 hydrolyzed from CaAl-Cl-LDH.

scholarly journals Synthesis and Characterization of Pyrochlore Bi2Sn2O7Doping with Praseodymium by Hydrothermal Method and Its Photocatalytic Activity Study

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Weicheng Xu ◽  
Guangyin Zhou ◽  
Jianzhang Fang ◽  
Zhang Liu ◽  
YunFang Chen ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Visible Light ◽  
Hydrothermal Method ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
20 Nm ◽  
Adsorption Desorption

Praseodymium doped Bi2Sn2O7(BSO), as a visible-light responsive photocatalyst, was prepared by a hydrothermal method with different dopant contents. The as-prepared photocatalysts were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), N2adsorption-desorption isotherm, X-ray photoelectron spectroscopy analysis (XPS), and UV-Vis diffuse reflectance spectroscopy (DRS). The photocatalytic activity of prepared catalysts was evaluated by the degradation of Rhodamine Bextra (RhB) and 2,4-dichlorophenol (2,4-DCP) in aqueous solution under visible light irradiation. It was found that Pr doping inhibited the growth of crystalline size and the as-prepared materials were small in size (10–20 nm). In our experiments, Pr-doped BSO samples exhibited enhanced visible-light photocatalytic activity compared to the undoped BSO, and the optimal dopant amount of Pr was 1.0 mol% for the best photocatalytic activity. On the basis of the calculated PL spectra, the mechanism of enhanced photocatalytic activity has been discussed.

scholarly journals Pore Modification and Phosphorus Doping Effect on Phosphoric Acid-Activated Fe-N-C for Alkaline Oxygen Reduction Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1519
Author(s):  
Jong Gyeong Kim ◽  
Sunghoon Han ◽  
Chanho Pak
Keyword(s):  
Phosphoric Acid ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Electronic States ◽  
Nitrogen Adsorption ◽  
Reduction Reaction ◽  
Phosphorus Doping ◽  
X Ray ◽  
Precious Metal Catalysts ◽  
Adsorption Desorption

The price and scarcity of platinum has driven up the demand for non-precious metal catalysts such as Fe-N-C. In this study, the effects of phosphoric acid (PA) activation and phosphorus doping were investigated using Fe-N-C catalysts prepared using SBA-15 as a sacrificial template. The physical and structural changes caused by the addition of PA were analyzed by nitrogen adsorption/desorption and X-ray diffraction. Analysis of the electronic states of Fe, N, and P were conducted by X-ray photoelectron spectroscopy. The amount and size of micropores varied depending on the PA content, with changes in pore structure observed using 0.066 g of PA. The electronic states of Fe and N did not change significantly after treatment with PA, and P was mainly found in states bonded to oxygen or carbon. When 0.135 g of PA was introduced per 1 g of silica, a catalytic activity which was increased slightly by 10 mV at −3 mA/cm2 was observed. A change in Fe-N-C stability was also observed through the introduction of PA.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Sign in / Sign up

Export Citation Format

Share Document