scholarly journals Study of the Rate-Determining Step of Rh Catalyzed CO2 Reduction: Insight on the Hydrogen Assisted Molecular Dissociation

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 538
Author(s):  
Mirko Vanzan ◽  
Margherita Marsili ◽  
Stefano Corni
Keyword(s):  
Density Functional ◽  
Co2 Reduction ◽  
Elastic Band ◽  
Co2 Methanation ◽  
Functional Theory ◽  
Activation Barriers ◽  
Subsequent Formation ◽  
Rate Determining Step ◽  
Co2 Recycling ◽  
Dissociation Barrier

In the context of climate change mitigation, CO2 methanation is an important option for the production of synthetic carbon-neutral fuels and for atmospheric CO2 recycling. While being highly exothermic, this reaction is kinetically unfavorable, requiring a catalyst to be efficiently activated. Recently Rh nanoparticles gained attention as effective photocatalyst, but the rate-determining step of this reaction on Rh surface has not been characterized yet. In this work, Density Functional Theory and Nudged Elastic Band calculations were performed to study the Rh-catalyzed rate-determining step of the CO2 methanation, which concerns the hydrogen assisted cleavage of the CO* molecule and subsequent formation of CH* and O* (* marks adsorbed species), passing through the CHO* key intermediate. The configurations of the various adsorbates on the Rh (100) surface were investigated and the reaction mechanism was studied exploiting different exchange-correlation functionals (PBE, RPBE) and the PBE+U technique. The methanation rate-determining step consists of two subprocesses which subsequently generate and dissociate the CHO* species. The energetics and the dynamics of such processes are extensively studied and described. Interestingly, PBE and PBE+U calculated activation barriers are in good agreement with the available experimental data, while RPBE largely overestimate the CHO* dissociation barrier.

scholarly journals A Computational Study of Direct CO2 Hydrogenation to Methanol on Pd Catalysts

2021 ◽  
Author(s):  
Igor Kowalec ◽  
Lara Kabalan ◽  
Richard Catlow ◽  
Andrew Logsdail
Keyword(s):  
Density Functional ◽  
Negative Charge ◽  
Computational Study ◽  
Adsorbed Species ◽  
Pd Catalysts ◽  
Functional Theory ◽  
Activation Barriers ◽  
Rate Determining Step ◽  
Adsorption Energies ◽  
Insight Into

<p>We investigate the mechanism of direct CO<sub>2</sub> hydrogenation to methanol on Pd (111), (100) and (110) surfaces using density functional theory (DFT), providing insight into the reactivity of CO<sub>2</sub> on Pd-based catalysts. The initial chemisorption of CO<sub>2</sub>, forming a partially charged CO<sub>2</sub><sup>δ-</sup>, is weakly endothermic on a Pd (111) surface, with an adsorption energy of 0.06 eV, and slightly exothermic on Pd (100) and (110) surfaces, with adsorption energies of -0.13 and -0.23 eV, respectively. Based on Mulliken analysis, we attribute the low stability of CO<sub>2</sub><sup>δ-</sup><sub> </sub>on the Pd (111) surface to a negative charge that accumulates on the surface Pd atoms interacting directly with the CO<sub>2</sub><sup>δ-</sup><sub> </sub>adsorbate. For the reaction of the adsorbed species on the Pd surface, HCOOH hydrogenation to H<sub>2</sub>COOH is predicted to be the rate determining step of the conversion to methanol in all cases, with activation barriers of 1.35, 1.26, and 0.92 eV on Pd (111), (100) and (110) surfaces, respectively.<br></p>

scholarly journals A Computational Study of Direct CO2 Hydrogenation to Methanol on Pd Catalysts

2021 ◽  
Author(s):  
Igor Kowalec ◽  
Lara Kabalan ◽  
Richard Catlow ◽  
Andrew Logsdail
Keyword(s):  
Density Functional ◽  
Negative Charge ◽  
Computational Study ◽  
Adsorbed Species ◽  
Pd Catalysts ◽  
Functional Theory ◽  
Activation Barriers ◽  
Rate Determining Step ◽  
Adsorption Energies ◽  
Insight Into

<p>We investigate the mechanism of direct CO<sub>2</sub> hydrogenation to methanol on Pd (111), (100) and (110) surfaces using density functional theory (DFT), providing insight into the reactivity of CO<sub>2</sub> on Pd-based catalysts. The initial chemisorption of CO<sub>2</sub>, forming a partially charged CO<sub>2</sub><sup>δ-</sup>, is weakly endothermic on a Pd (111) surface, with an adsorption energy of 0.06 eV, and slightly exothermic on Pd (100) and (110) surfaces, with adsorption energies of -0.13 and -0.23 eV, respectively. Based on Mulliken analysis, we attribute the low stability of CO<sub>2</sub><sup>δ-</sup><sub> </sub>on the Pd (111) surface to a negative charge that accumulates on the surface Pd atoms interacting directly with the CO<sub>2</sub><sup>δ-</sup><sub> </sub>adsorbate. For the reaction of the adsorbed species on the Pd surface, HCOOH hydrogenation to H<sub>2</sub>COOH is predicted to be the rate determining step of the conversion to methanol in all cases, with activation barriers of 1.35, 1.26, and 0.92 eV on Pd (111), (100) and (110) surfaces, respectively.<br></p>

scholarly journals A theoretical study on the CO2 methanation over Ni5/AC catalysts by means of density functional theory. Part I: Adsorption and activation stages

2020 ◽  
Vol 9 (1) ◽  
pp. 33-38
Author(s):  
Hue Van Thi Minh ◽  
Lan Phung Thi ◽  
Ha Nguyen Thi Thu ◽  
Cam Le Minh ◽  
Ha Nguyen Ngoc
Keyword(s):  
Density Functional Theory ◽  
Activated Carbon ◽  
Adsorption Energy ◽  
Density Functional ◽  
Adsorption Process ◽  
Theoretical Study ◽  
Bond Orders ◽  
Elastic Band ◽  
Co2 Methanation ◽  
Functional Theory

The adsorption and activation processes of CO2 and H2 on Ni5 catalyst supported on activated carbon (Ni5/AC) were investigated by using density functional theory at GGA-PBE/DZP level of theory and climbing image – nudged elastic band (CI-NEB) method. The adsorption energy, charges on atoms, bond orders and geometry parameters were calculated and analyzed. The most favourable adsorption configurations were determined. The results show that H2 and CO2 are chemically adsorbed on Ni5/AC. The adsorption process does not involved a transition state. CO2 is strongly activated on Ni5/AC system.

scholarly journals A Computational Study of Direct CO2 Hydrogenation to Methanol on Pd Catalysts

2021 ◽  
Author(s):  
Igor Kowalec ◽  
Lara Kabalan ◽  
Richard Catlow ◽  
Andrew Logsdail
Keyword(s):  
Density Functional ◽  
Negative Charge ◽  
Computational Study ◽  
Adsorbed Species ◽  
Pd Catalysts ◽  
Functional Theory ◽  
Activation Barriers ◽  
Rate Determining Step ◽  
Adsorption Energies ◽  
Insight Into

<p>We investigate the mechanism of direct CO<sub>2</sub> hydrogenation to methanol on Pd (111), (100) and (110) surfaces using density functional theory (DFT), providing insight into the reactivity of CO<sub>2</sub> on Pd-based catalysts. The initial chemisorption of CO<sub>2</sub>, forming a partially charged CO<sub>2</sub><sup>δ-</sup>, is weakly endothermic on a Pd (111) surface, with an adsorption energy of 0.06 eV, and slightly exothermic on Pd (100) and (110) surfaces, with adsorption energies of -0.13 and -0.23 eV, respectively. Based on Mulliken analysis, we attribute the low stability of CO<sub>2</sub><sup>δ-</sup><sub> </sub>on the Pd (111) surface to a negative charge that accumulates on the surface Pd atoms interacting directly with the CO<sub>2</sub><sup>δ-</sup><sub> </sub>adsorbate. For the reaction of the adsorbed species on the Pd surface, HCOOH hydrogenation to H<sub>2</sub>COOH is predicted to be the rate determining step of the conversion to methanol in all cases, with activation barriers of 1.35, 1.26, and 0.92 eV on Pd (111), (100) and (110) surfaces, respectively.<br></p>

scholarly journals A theoretical study on the CO2 methanation over Ni5/AC catalysts by means of density functional theory. Part II: Reaction pathways

2020 ◽  
Vol 9 (1) ◽  
pp. 73-80
Author(s):  
Hue Van Thi Minh ◽  
Lan Phung Thi ◽  
Ha Nguyen Thi Thu ◽  
Cam Le Minh ◽  
Ha Nguyen Ngoc
Keyword(s):  
Carbon Dioxide ◽  
Activation Energy ◽  
Density Functional Theory ◽  
Density Functional ◽  
Theoretical Study ◽  
Reaction Pathways ◽  
Reaction Energy ◽  
Elastic Band ◽  
Co2 Methanation ◽  
Functional Theory

The methanation of carbon dioxide over Ni5 supported on activated carbon (Ni5/AC) was studied by using density functional theory and climbing image – nudged elastic band methods. A reaction diagram for the formation of methane via CO or HCOO species, which consists of 14 reaction steps was proposed. The reaction energy and activation energy for the overall steps involved in the reaction process were calculated and analyzed. Following the proposed mechanism possible carbon byproducts of the CO2 methanation reaction are CO and HCHO. Formation of these products can occur at high temperatures, but it is more thermodynamically difficult than formation of CH4. The formation of CH4 is more preferably occur via the CO pathway than the HCOO pathway.

CO2 reduction catalysis by tunable square-planar transition-metal complexes: a theoretical investigation using nitrogen-substituted carbon nanotube models

2017 ◽  
Vol 19 (43) ◽  
pp. 29068-29076 ◽  
Author(s):  
Yu-Te Chan ◽  
Ming-Kang Tsai
Keyword(s):  
Density Functional Theory ◽  
Carbon Nanotube ◽  
Transition Metal ◽  
Metal Complexes ◽  
Transition Metal Complexes ◽  
Density Functional ◽  
Co2 Reduction ◽  
Functional Theory ◽  
Square Planar ◽  
Planar Transition

The CO2 reduction capabilities of transition-metal-chelated nitrogen-substituted carbon nanotube models (TM-4N2v-CNT, TM = Fe, Ru, Os, Co, Rh, Ir, Ni, Pt or Cu) are characterized by density functional theory.

scholarly journals Mechanical bending effects on hydrogen storage of Ni decorated (8, 0) boron nitride nanotube : DFT study

2019 ◽  
Vol 16 (1) ◽  
pp. 299-325
Author(s):  
Atef Elmahdy ◽  
Hayam Taha ◽  
Mohamed Kamel ◽  
Menna Tarek
Keyword(s):  
Boron Nitride ◽  
Hydrogen Storage ◽  
Density Functional ◽  
Boron Nitride Nanotubes ◽  
Department Of Energy ◽  
Functional Theory ◽  
Activation Barriers ◽  
The Us ◽  
Adsorption Energies ◽  
Mechanical Bending

The influence of mechanical bending to tuning the hydrogen storage of Ni-functionalized of zigzag type of boron nitride nanotubes (BNNTs) has been investigated using density functional theory (DFT) with reference to the ultimate targets of the US Department of Energy (DOE). Single Ni atoms prefer to bind strongly at the axial bridge site of BN nanotube, and each Ni atom bound on BNNT may adsorb up to five, H2 molecules, with average adsorption energies per hydrogen molecule of )-1.622,-0.527 eV( for the undeformed B40N40-? = 0 , ) -1.62 , 0-0.308 eV( for the deformed B40N40-? = 15, ) -1.589,  -0.310 eV( for the deformed B40N40-? = 30, and ) -1.368-  -0.323 eV( for the deformed B40N40-? = 45 nanotubes respectively. with the H-H bonds between H2 molecules significantly elongated. The curvature attributed to the bending angle has effect on average adsorption energies per H2 molecule. With no metal clustering, the system gravimetric capacities are expected to be as large as 5.691 wt % for 5H2 Ni B40N40-? = 0, 15, 30, 45. While the desorption activation barriers of the complexes nH2 + Ni B40N40-? = 0 (n = 1-4) are outside the (DOE) domain (-0.2 to -0.6 eV), the complexes nH2 + Ni- B40N40-? = 0 (n = 5) is inside this domain. For nH2 + Ni- B40N40-? = 15, 30, 45 with (n = 1-2) are outside the (DOE) domain, the complexes nH2 + Ni- B40N40-? = 15, 30, 45 with (n = 3-5) are inside this domain. The hydrogen storage of the irreversible 4H2+ Ni- B40N40-? = 0, 2H2+ Ni- B40N40-? = 15, 30, 45 and reversible 5H2+ Ni- B40N40-? = 0, 3H2+ Ni- B40N40-? = 15, 30, 45 interactions are characterized in terms of density of states, pairwise and non-pairwise additivity, infrared, Raman, electrophilicity and molecular electrostatic potentials. Our calculations expect that 5H2- Ni- B40N40-j = 0, 15, 30, 45 complexes are promising hydrogen storage candidates.

A Density Functional Theory Study of the Isomerization of Substituted 2and#39;-hydroxychalcones to the Corresponding Flavanones

2021 ◽  
Vol 43 (1) ◽  
pp. 25-25
Author(s):  
Said Abdelqadar Said Said Abdelqadar Said ◽  
Omar A Shareef and Abdulkhalik S Alkazzaz Omar A Shareef and Abdulkhalik S Alkazzaz
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Ring Closure ◽  
Basis Set ◽  
Functional Theory ◽  
Rate Determining Step ◽  
The Density Functional Theory ◽  
Electronic And Structural Properties ◽  
Maximum Hardness Principle

The transformation of 2and#39;-hydroxychalcones to their corresponding flavanones was studied theoretically by the use of the density functional theory (DFT) with B3-LYP/ 6-311G basis set to get important information about the role of both of electronic and structural properties in this process. The obtained energies were found to be in agreement with our previous results that obtained from HPLC studies. The estimated hardness, polarizability, and electrophilicity profiles were found to obey the maximum hardness principle (MHP), minimum polarizability principle (MPP), and the minimum electrophilicity principle (MEP) respectively. Flavanone ring closure was found to be the rate-determining step.

scholarly journals Computational Study of Methane C–H Activation by Main Group and Mixed Main Group–Transition Metal Complexes

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2794
Author(s):  
Carly C. Carter ◽  
Thomas R. Cundari
Keyword(s):  
Transition Metal Complexes ◽  
Active Site ◽  
Density Functional ◽  
Computational Study ◽  
Divalent Metal ◽  
Main Group ◽  
Free Energies ◽  
Functional Theory ◽  
Activation Barriers ◽  
Experimental Values

In the present density functional theory (DFT) research, nine different molecules, each with different combinations of A (triel) and E (divalent metal) elements, were reacted to effect methane C–H activation. The compounds modeled herein incorporated the triels A = B, Al, or Ga and the divalent metals E = Be, Mg, or Zn. The results show that changes in the divalent metal have a much bigger impact on the thermodynamics and methane activation barriers than changes in the triels. The activating molecules that contained beryllium were most likely to have the potential for activating methane, as their free energies of reaction and free energy barriers were close to reasonable experimental values (i.e., ΔG close to thermoneutral, ΔG‡ ~30 kcal/mol). In contrast, the molecules that contained larger elements such as Zn and Ga had much higher ΔG‡. The addition of various substituents to the A–E complexes did not seem to affect thermodynamics but had some effect on the kinetics when substituted closer to the active site.

Sign in / Sign up

Export Citation Format

Share Document