scholarly journals Performance Study of Zn-Co-Ni/AC Catalyst in Acetylene Acetylation

Catalysts ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1271
Author(s):  
Zhuang Xu ◽  
Peijie He ◽  
Yuhao Chen ◽  
Mingyuan Zhu ◽  
Xugen Wang ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Active Component ◽  
Electron Cloud ◽  
Performance Study ◽  
Reaction Conditions ◽  
Co Catalysts ◽  
Industrial Synthesis ◽  
The Stability ◽  
Ternary Catalysts ◽  
Cloud Density

Zinc acetate (Zn(OAc)2) loaded on activated carbon (AC) is the most commonly used catalyst for the industrial synthesis of vinyl acetate (VAc) using the acetylene method. The aim of this study is to optimize the Zn(OAc)2/AC catalyst by adding co-catalysts to improve its activity and stability. Ternary catalysts were synthesized by adding Co and Ni to the Zn(OAc)2/AC catalyst (Zn-Co-Ni/AC). Due to the strong synergistic effect among promoter Co, Ni, and the active component of Zn(OAc)2, the resulting catalyst is capable to absorb more acetic acid and less acetylene. The stability and activity of Zn-Co-Ni/AC catalyst have been improved through electron transfer to alter the electron cloud density around the Zn element. Under the same reaction conditions, the activity of Zn-Co-Ni/AC catalyst was enhanced by 83% compared to that of Zn(OAc)2/AC, and the activity was still as high as 30.1% after 120 h of testing.

Solid State Analysis and Theoretical Explorations on Polymorphic and Hydrate Forms of p-Hydroxybenzaldehyde Isonicotinichydrazone: Effect of Additives on Polymorphic Crystallization

2018 ◽  
Author(s):  
Lincy Tom ◽  
Victoria A. Smolenski ◽  
Jerry P. Jasinski ◽  
M.R. Prathapachandra Kurup
Keyword(s):  
Hirshfeld Surface ◽  
Framework Analysis ◽  
Reaction Conditions ◽  
Space Groups ◽  
Effect Of Additives ◽  
Ft Ir ◽  
Packing Arrangement ◽  
The Stability ◽  
Ir And Raman ◽  
Isonicotinic Hydrazide

The reaction of p-hydroxybenzaldehyde with an equimolar amount of isonicotinic hydrazide afforded two polymorphic and hydrate forms of p-hydroxybenzaldehyde isonicotinichydrazone (HBIH) by varying the experimental reaction conditions. The compounds are fully characterized by means of single crystal and powder diffraction methods, vibrational spectroscopy (FT-IR and Raman), thermal and elemental analysis. The compound crystallizes in three different forms in two different space groups, P21/c (form PA and PB) and Pbca (PC). The Hirshfeld surface analysis shows the differences in the relative contributions of intermolecular interactions to the total Hirshfeld surface area for the HBIH molecules. The calculated pairwise interaction energies (104-116 kJ/mol) can be related to the stability of the crystals. Energy framework analysis identifies the interaction hierarchy and their topology. The geometry and conformation of the three forms are essentially similar which differ only by packing arrangement.

Solid State Analysis and Theoretical Explorations on Polymorphic and Hydrate Forms of p-Hydroxybenzaldehyde Isonicotinichydrazone: Effect of Additives on Polymorphic Crystallization

2018 ◽  
Author(s):  
Lincy Tom ◽  
Victoria A. Smolenski ◽  
Jerry P. Jasinski ◽  
M.R. Prathapachandra Kurup
Keyword(s):  
Hirshfeld Surface ◽  
Framework Analysis ◽  
Reaction Conditions ◽  
Space Groups ◽  
Effect Of Additives ◽  
Ft Ir ◽  
Packing Arrangement ◽  
The Stability ◽  
Ir And Raman ◽  
Isonicotinic Hydrazide

The reaction of p-hydroxybenzaldehyde with an equimolar amount of isonicotinic hydrazide afforded two polymorphic and hydrate forms of p-hydroxybenzaldehyde isonicotinichydrazone (HBIH) by varying the experimental reaction conditions. The compounds are fully characterized by means of single crystal and powder diffraction methods, vibrational spectroscopy (FT-IR and Raman), thermal and elemental analysis. The compound crystallizes in three different forms in two different space groups, P21/c (form PA and PB) and Pbca (PC). The Hirshfeld surface analysis shows the differences in the relative contributions of intermolecular interactions to the total Hirshfeld surface area for the HBIH molecules. The calculated pairwise interaction energies (104-116 kJ/mol) can be related to the stability of the crystals. Energy framework analysis identifies the interaction hierarchy and their topology. The geometry and conformation of the three forms are essentially similar which differ only by packing arrangement.

Oxidation of Ethanol on Sn-Mo Oxide Catalysts

1992 ◽  
Vol 57 (3) ◽  
pp. 439-445
Author(s):  
Magdy A. Wassel ◽  
Nalla K. Allahaverdova ◽  
Tofki G. Alkhazov
Keyword(s):  
Acetic Acid ◽  
Potassium Hydroxide ◽  
Pulse Method ◽  
Conversion Ratio ◽  
Mo Catalyst ◽  
Acid Ratio ◽  
Aqueous Potassium Hydroxide ◽  
The Stability ◽  
Primary Oxidation ◽  
Oxidation Of Ethanol

To determine the acidic and basic properties of the title catalysts, the adsorption of NH3 and SO2 was compared using pulse method. It was found that this characteristics undergoes changes when the Sn-Mo catalyst is treated with aqueous potassium hydroxide solutions of different concentrations. The catalyst treated with the more concentrated KOH solution possesses mainly properties of a base. When studying the oxidation of ethanol it has been found that the αCO2/αaldehyde conversion ratio increases with the time of contact of the mixture with the catalyst while the αCO2/α acid ratio is not affected. The study of two alcohols deuterated either in OH group (C2H5OD) or in the alkyl group ((C2D5OH) has shown that the substitution of C-H for C-D bond enhances the stability of the primary oxidation product, deuterated ethanal, so that it is not transformed further to acetic acid.

A review of sustainable lignocellulose biorefining applying (natural) deep eutectic solvents (DESs) for separations, catalysis and enzymatic biotransformation processes

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ana Bjelić ◽  
Brigita Hočevar ◽  
Miha Grilc ◽  
Uroš Novak ◽  
Blaž Likozar
Keyword(s):  
Special Section ◽  
Cost Effective ◽  
Deep Eutectic Solvents ◽  
Reaction Conditions ◽  
Co Catalysts ◽  
Biomass Fractionation ◽  
Functional Step ◽  
Natural Deep Eutectic Solvents ◽  
Economic Need ◽  
Molecular Compounds

AbstractConventional biorefinery processes are complex, engineered and energy-intensive, where biomass fractionation, a key functional step for the production of biomass-derived chemical substances, demands industrial organic solvents and harsh, environmentally harmful reaction conditions. There is a timely, clear and unmet economic need for a systematic, robust and affordable conversion method technology to become greener, sustainable and cost-effective. In this perspective, deep eutectic solvents (DESs) have been envisaged as the most advanced novel polar liquids that are entirely made of natural, molecular compounds that are capable of an association via hydrogen bonding interactions. DES has quickly emerged in various application functions thanks to a formulations’ simple preparation. These molecules themselves are biobased, renewable, biodegradable and eco-friendly. The present experimental review is providing the state of the art topical overview of trends regarding the employment of DESs in investigated biorefinery-related techniques. This review covers DESs for lignocellulosic component isolation, applications as (co)catalysts and their functionality range in biocatalysis. Furthermore, a special section of the DESs recyclability is included. For DESs to unlock numerous new (reactive) possibilities in future biorefineries, the critical estimation of its complexity in the reaction, separation, or fractionation medium should be addressed more in future studies.

Progress in preparation and characterization of silylene iron, cobalt and nickel complexes

2021 ◽  
Author(s):  
Wenjing Yang ◽  
Yanhong Dong ◽  
Hongjian Sun ◽  
Xiaoyan Li
Keyword(s):  
Nickel Complexes ◽  
Electron Cloud ◽  
Synthesis And Characterization ◽  
Iron Cobalt ◽  
Cloud Density ◽  
Cobalt And Nickel

The synthesis and characterization of Fe, Co and Ni complexes supported by silylene ligands in recent ten years are summarized. Due to the decrease of electron cloud density on Si...

A review of lignin hydrogen peroxide oxidation chemistry with emphasis on aromatic aldehydes and acids

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajinkya More ◽  
Thomas Elder ◽  
Zhihua Jiang
Keyword(s):  
Hydrogen Peroxide ◽  
Oxidative Degradation ◽  
Reaction Medium ◽  
Dicarboxylic Acids ◽  
Aromatic Aldehydes ◽  
Product Distribution ◽  
Reaction Conditions ◽  
Alkaline Conditions ◽  
The Stability ◽  
Oxidation Chemistry

Abstract This review discusses the main factors that govern the oxidation processes of lignins into aromatic aldehydes and acids using hydrogen peroxide. Aromatic aldehydes and acids are produced in the oxidative degradation of lignin whereas mono and dicarboxylic acids are the main products. The stability of hydrogen peroxide under the reaction conditions is an important factor that needs to be addressed for selectively improving the yield of aromatic aldehydes. Hydrogen peroxide in the presence of heavy metal ions readily decomposes, leading to minor degradation of lignin. This degradation results in quinones which are highly reactive towards peroxide. Under these reaction conditions, the pH of the reaction medium defines the reaction mechanism and the product distribution. Under acidic conditions, hydrogen peroxide reacts electrophilically with electron rich aromatic and olefinic structures at comparatively higher temperatures. In contrast, under alkaline conditions it reacts nucleophilically with electron deficient carbonyl and conjugated carbonyl structures in lignin. The reaction pattern in the oxidation of lignin usually involves cleavage of the aromatic ring, the aliphatic side chain or other linkages which will be discussed in this review.

Study on the Synthesis of Isoamyl Acetate Catalyzed by Strong Acidic Cation Exchange Resin

2011 ◽  
Vol 396-398 ◽  
pp. 2411-2415 ◽  
Author(s):  
Ping Lan ◽  
Li Hong Lan ◽  
Tao Xie ◽  
An Ping Liao
Keyword(s):  
Acetic Acid ◽  
Reaction Time ◽  
Cation Exchanger ◽  
Cation Exchange Resin ◽  
Isoamyl Acetate ◽  
Molar Ratio ◽  
Esterification Reaction ◽  
Reaction Conditions ◽  
Optimum Reaction

Isoamyl acetate was synthesized from isoamylol and glacial acetic acid with strong acidic cation exchanger as catalyst. The effects of reaction conditions such as acid-alcohol ratio, reaction time, catalyst dosage to esterification reaction have been investigated and the optimum reaction conditions can be concluded as: the molar ratio of acetic acid to isoamylol 0.8:1, reaction time 2h, 25 % of catalyst (quality of acetic acid as benchmark). The conversion rate can reach up to 75.46%. The catalytic ability didn’t reduce significantly after reusing 10 times and the results showed that the catalyst exhibited preferably catalytic activity and reusability.

The Meisenheimer rearrangement in heterocyclic synthesis. II. Synthesis and X-ray crystal structure of a tetrahydro-1H-2,3-benzoxazocine and preparation of a hexahydro-2,3-benzoxazonine

1980 ◽  
Vol 33 (6) ◽  
pp. 1323 ◽  
Author(s):  
JB Bremner ◽  
EJ Browne ◽  
PE Davies ◽  
CLWAH Raston
Keyword(s):  
Molecular Structure ◽  
Crystal Structure ◽  
Acetic Acid ◽  
Crystal And Molecular Structure ◽  
Phosphorus Oxychloride ◽  
Crystallographic Analysis ◽  
Heterocyclic Synthesis ◽  
Reaction Conditions ◽  
X Ray ◽  
Heterocyclic Derivatives

The heterocyclic derivatives, 8,9-dimethoxy-3-methyl-1-phenyl-3,4,5,6- tetrahydro-1H-2,3-benzoxazocine(3a) and 9,10-dimethoxy-3-methyl-1- phenyl-1,3,4,5,6,7-hexahydro-2,3-benzoxazonine (3b),examples of two new ring systems, have been prepared by Meisenheimer rearrangement of the corresponding 2-benzazepine and 2-benzazocine N-oxide derivatives (2a) and (2b). The Bischler-Napieralski-type cyclization reaction was used in the preparation of the tertiary amine precursors of these N-oxides reaction conditions for the cyclization were critical and phosphorus oxychloride in refluxing butanenitrile was found to give the best yields of the seven- or eight-membered cyclic imine intermediates. Reductive cleavage of the benzoxazocine derivative (3a) with zinc in acetic acid followed by N-methylation gave the expected product, [2-{3- (dimethylamino)propyl}-4,5-di-methoxyphenyl]phenylmethanol (12). The crystal and molecular structure of (3a) has been determined by X-ray crystallographic analysis.

Fasteners: Acid Catalysis

Reactions ◽  
2011 ◽  
Author(s):  
Peter Atkins
Keyword(s):  
Acetic Acid ◽  
Acid Catalysis ◽  
Positive Charge ◽  
Proton Donor ◽  
Electron Cloud ◽  
Base Catalysis ◽  
Acid Molecule ◽  
General Basis ◽  
Missile Attack ◽  
Powerful Electron

I explained the general basis of catalysis in Reaction 11, where I showed that it accelerated a reaction by opening a new, faster route from reactants to products. One of the ways to achieve catalysis in organic chemistry is to carry out a reaction in an acidic or basic (alkaline) environment, and that is what I explore here. In Reaction 27 you will see the enormous importance of processes like this, not just for keeping organic chemists productive but also for keeping us all alive; I give a first glimpse of that later in this section too. Various kinds of acid and base catalysis, sometimes both simultaneously, are going on throughout the cells of our body and ensuring that all the processes of life are maintained; in fact they are the very processes of life. I deal with acid catalysis in this section and base catalysis in the next. The point to remember throughout this section is that an acid is a proton donor (Reaction 2) and a proton is an aggressive, nutty little centre of positive charge. If a proton gets itself attached to a molecule, it can draw electrons towards itself and so expose the nuclei that they formerly surrounded. That is, a proton can cause the appearance of positive charge elsewhere in the molecule where the nuclei shine through the depleted fog of electrons. Because positive charge is attracted to negative charge, one outcome is that a molecule may be converted into a powerful electron-sniffing electrophile (Reaction 16). Another way of looking at the outcome of adding a proton is to note that a C atom with a positive charge is a target for nucleophilic missile attack (Reaction 15). Therefore, if a proton draws the electron cloud away from a nearby atom, then its presence is like a fifth-column agent preparing a target for later attack. Let’s shrink and watch as some acid is added to a molecule that contains a –CO– group, such as acetic acid. The protons provided by the added acid are riding on water molecules, as H3O+ ions, and arrive in the vicinity of the acetic acid molecule.

scholarly journals Correction to: Electron Cloud Density Generated by Microring-Embedded Nano-Grating System

Plasmonics ◽  
2020 ◽  
Vol 15 (6) ◽  
pp. 2225-2225
Author(s):  
M. Bunruangses ◽  
P. Youplao ◽  
I. S. Amiri ◽  
N. Pornsuwancharoen ◽  
S. Punthawanunt ◽  
...  
Keyword(s):  
Electron Cloud ◽  
Cloud Density
Sign in / Sign up

Export Citation Format

Share Document