scholarly journals Replacement of Chromium by Non-Toxic Metals in Lewis-Acid MOFs: Assessment of Stability as Glucose Conversion Catalysts

Catalysts ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 437 ◽  
Author(s):  
Ralentri Pertiwi ◽  
Ryan Oozeerally ◽  
David L. Burnett ◽  
Thomas W. Chamberlain ◽  
Nikolay Cherkasov ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Metal Organic Framework ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Major Product ◽  
Hydrothermal Conditions ◽  
Hydroxymethyl Furfural ◽  
Extended Synthesis ◽  
Metal Organic ◽  
Optimum Material

The metal–organic framework MIL-101(Cr) is known as a solid–acid catalyst for the solution conversion of biomass-derived glucose to 5-hydroxymethyl furfural (5-HMF). We study the substitution of Cr3+ by Fe3+ and Sc3+ in the MIL-101 structure in order to prepare more environmentally benign catalysts. MIL-101(Fe) can be prepared, and the inclusion of Sc is possible at low levels (10% of Fe replaced). On extended synthesis times the polymorphic MIL-88B structure instead forms.Increasing the amount of Sc also only yields MIL-88B, even at short crystallisation times. The MIL-88B structure is unstable under hydrothermal conditions, but in dimethylsulfoxide solvent, it provides 5-HMF from glucose as the major product. The optimum material is a bimetallic (Fe,Sc) form of MIL-88B, which provides ~70% conversion of glucose with 35% selectivity towards 5-HMF after 3 hours at 140 °C: this offers high conversion compared to other heterogeneous catalysts reported in the same solvent.

scholarly journals Facile synthesis of polyoxometalates tethered to post Fe-BTC frameworks for esterification of free fatty acids to biodiesel

RSC Advances ◽  
2019 ◽  
Vol 9 (14) ◽  
pp. 8113-8120 ◽  
Author(s):  
Qiuyun Zhang ◽  
Xiaofang Liu ◽  
Tingting Yang ◽  
Caiyan Yue ◽  
Quanlin Pu ◽  
...  
Keyword(s):  
Metal Organic Framework ◽  
Solid Acid Catalyst ◽  
Synthesis Method ◽  
Porous Metal ◽  
Acid Catalyst ◽  
Phosphomolybdic Acid ◽  
Biodiesel Production ◽  
One Pot ◽  
Metal Organic ◽  
Highly Porous

Phosphomolybdic acid was sequentially incorporated into a highly porous metal–organic framework by a one-pot synthesis method, and the prepared composite was used as an efficient and stable solid acid catalyst for biodiesel production.

scholarly journals Identification of the strong Brønsted acid site in a metal–organic framework solid acid catalyst

2018 ◽  
Vol 11 (2) ◽  
pp. 170-176 ◽  
Author(s):  
Christopher A. Trickett ◽  
Thomas M. Osborn Popp ◽  
Ji Su ◽  
Chang Yan ◽  
Jonathan Weisberg ◽  
...  
Keyword(s):  
Acid Site ◽  
Solid Acid ◽  
Metal Organic Framework ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Bronsted Acid ◽  
Brønsted Acid Site ◽  
Brönsted Acid ◽  
Metal Organic ◽  
Organic Framework

scholarly journals A hydrothermally stable ytterbium metal–organic framework as a bifunctional solid-acid catalyst for glucose conversion

2019 ◽  
Vol 55 (76) ◽  
pp. 11446-11449 ◽  
Author(s):  
David L. Burnett ◽  
Ryan Oozeerally ◽  
Ralentri Pertiwi ◽  
Thomas W. Chamberlain ◽  
Nikolay Cherkasov ◽  
...  
Keyword(s):  
Solid Acid ◽  
Metal Organic Framework ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Acid Sites ◽  
Bronsted Acid ◽  
Brønsted Acid Sites ◽  
Brönsted Acid ◽  
Metal Organic ◽  
Organic Framework

A ytterbium–organic framework containing Lewis and Brønsted acid sites that effects transformation of glucose to 5-HMF in water at 140 °C.

An Overview of Metal-organic Frameworks-based Acid/Base Catalysts for Biofuel Synthesis

2020 ◽  
Vol 24 (16) ◽  
pp. 1876-1891
Author(s):  
Qiuyun Zhang ◽  
Yutao Zhang ◽  
Jingsong Cheng ◽  
Hu Li ◽  
Peihua Ma
Keyword(s):  
Alternative Fuels ◽  
Heterogeneous Catalysts ◽  
Supported Catalysts ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
Flexible Structures ◽  
Biodiesel Production ◽  
Biodiesel Synthesis ◽  
Metal Organic ◽  
Organic Framework

Biofuel synthesis is of great significance for producing alternative fuels. Among the developed catalytic materials, the metal-organic framework-based hybrids used as acidic, basic, or supported catalysts play major roles in the biodiesel production. This paper presents a timely and comprehensive review of recent developments on the design and preparation of metal-organic frameworks-based catalysts used for biodiesel synthesis from various oil feedstocks, including MILs-based catalysts, ZIFs-based catalysts, UiO-based catalysts, Cu-BTC-based catalysts, and MOFs-derived porous catalysts. Due to their unique and flexible structures, excellent thermal and hydrothermal stability, and tunable host-guest interactions, as compared with other heterogeneous catalysts, metal-organic framework-based catalysts have good opportunities for application in the production of biodiesel at industrial scale.

Single-Site Heterogeneous Catalysts for Olefin Polymerization Enabled by Cation Exchange in a Metal-Organic Framework

2016 ◽  
Vol 138 (32) ◽  
pp. 10232-10237 ◽  
Author(s):  
Robert J. Comito ◽  
Keith J. Fritzsching ◽  
Benjamin J. Sundell ◽  
Klaus Schmidt-Rohr ◽  
Mircea Dincă
Keyword(s):  
Cation Exchange ◽  
Heterogeneous Catalysts ◽  
Olefin Polymerization ◽  
Metal Organic Framework ◽  
Single Site ◽  
Metal Organic ◽  
Organic Framework

FeCl3–SiO2 as heterogeneous catalysts for the preparation of dihydropyrano[3,2-b]chromenediones

2011 ◽  
Vol 76 (12) ◽  
pp. 1791-1797 ◽  
Author(s):  
Wei-Lin Li ◽  
Jin-Ying Liang ◽  
Tian-Bao Wang ◽  
Ya-Qin Yang
Keyword(s):  
Heterogeneous Catalyst ◽  
Heterogeneous Catalysts ◽  
Solid Acid ◽  
Kojic Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Environment Friendly ◽  
Appreciable Change

FeCl3–SiO2 is environment-friendly heterogeneous catalyst for the condensation of kojic acid and aldehydes with dimedone to afford dihydropyrano[3,2-b]chromenediones. The solid acid catalyst is stable and can be easily recovered and reused without appreciable change in its efficiency.

scholarly journals Quinone-modified metal-organic frameworks MIL-101(Fe) as heterogeneous catalysts of persulfate activation for degradation of aqueous organic pollutants

2019 ◽  
Vol 79 (12) ◽  
pp. 2357-2365 ◽  
Author(s):  
Huaisu Guo ◽  
Weilin Guo ◽  
Yang Liu ◽  
Xiaohua Ren
Keyword(s):  
Photoelectron Spectroscopy ◽  
Heterogeneous Catalysts ◽  
Electrochemical Impedance ◽  
Metal Organic Framework ◽  
Optimum Conditions ◽  
X Ray Diffraction ◽  
Heterogeneous Fenton ◽  
X Ray ◽  
Metal Organic ◽  
Persulfate Activation

Abstract In this work, quinone-modified metal-organic framework MIL-101(Fe)(Q-MIL-101(Fe)), as a novel heterogeneous Fenton-like catalyst, was synthesized for the activation of persulfate (PS) to remove bisphenol A (BPA). The synthetic Q-MIL-101(Fe) was characterized via X-ray diffraction, scanning electron microscope, Fourier transform infrared, electrochemical impedance spectroscopy, cyclic voltammetry and X-ray photoelectron spectroscopy. As compared to the pure MIL-101(Fe), Q-MIL-101(Fe) displayed better catalytic activity and reusability. The results manifested that the Q-MIL-101(Fe) kept quinone units, which successfully promoted the redox cycling of Fe3+/Fe2+ and enhanced the removal efficiency. In addition, the reaction factors of Q-MIL-101(Fe) were studied (e.g. pH, catalyst dosage, PS concentration and temperature), showing that the optimum conditions were [catalyst] = 0.2 g/L, [BPA] = 60 mg/L, [PS] = 4 mmol/L, pH = 6.79, temperature = 25 °C. On the basis of these findings, the probable mechanism on the heterogeneous activation of PS by Q-MIL-101(Fe) was proposed.

Two-dimensional metal–organic framework nanosheets for highly efficient electrocatalytic biomass 5-(hydroxymethyl)furfural (HMF) valorization

2020 ◽  
Vol 8 (39) ◽  
pp. 20386-20392
Author(s):  
Mengke Cai ◽  
Yawei Zhang ◽  
Yiyue Zhao ◽  
Qinglin Liu ◽  
Yinle Li ◽  
...  
Keyword(s):  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
Two Dimensional ◽  
Biomass Valorization ◽  
Hydroxymethyl Furfural ◽  
Highly Efficient ◽  
Electrocatalytic Performance ◽  
Metal Organic ◽  
Furandicarboxylic Acid ◽  
Organic Framework

2D metal–organic frameworks (MOFs) could promote biomass valorization, and electrooxidation of 5-(hydroxymethyl)furfural (HMF) into 2,5-furandicarboxylic acid (FDCA) with a highly efficient electrocatalytic performance.

An Efficient and Reusable Multifunctional Composite Magnetic Nanocatalyst for Knoevenagel Condensation

Synlett ◽  
2019 ◽  
Vol 30 (06) ◽  
pp. 699-702 ◽  
Author(s):  
Yu Hu ◽  
Nan Yao ◽  
Jin Tan ◽  
Yang Liu
Keyword(s):  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Knoevenagel Condensation ◽  
Metal Organic Framework ◽  
Catalytic Performance ◽  
Significant Loss ◽  
Magnetic Nanocatalyst ◽  
Metal Organic ◽  
Nife2o4 Nanoparticles ◽  
Organic Framework

A range of multifunctional magnetic metal–organic framework nanomaterials consisting of various mass ratios of the metal–organic framework MIL-53(Fe) and magnetic SiO2@NiFe2O4 nanoparticles were designed, prepared, characterized, and evaluated as heterogeneous catalysts for the Knoevenagel condensation. The as-fabricated nanomaterials, especially the nanocatalyst MIL-53(Fe)@SiO2@NiFe2O4(1.0), showed good catalytic performance in the Knoevenagel condensation at room temperature as a result of synergistic interaction between the Lewis acid iron sites of MIL-53(Fe) and the active sites of the magnetic SiO2@NiFe2O4 nanoparticles. In addition, the heterogeneous catalyst was readily recovered and a recycling test showed that it could be reused for five times without significant loss of its catalytic activity, making it economical and environmentally friendly.

Sign in / Sign up

Export Citation Format

Share Document