Alginate NiFe2O4 Nanoparticles Cryogel for Electrochemical Glucose Biosensor Development

Glucose biosensors based on porous material of alginate cryogel has been developed, and the cryogel provides a large surface area for enzyme immobilization. The alginate cryogel has been supplemented with NiFe2O4 nanoparticles to improve the electron transfer for electrochemical detection. The fabrication parameters and operational conditions for the biosensor have also been optimized. The results showed that the optimum addition of NiFe2O4 nanoparticles to the alginate solution was 0.03 g/mL. The optimum operational conditions for the electrochemical detection were a cyclic voltammetry scan rate of 0.11 V/s, buffer pH of 7.0, and buffer concentration of 150 mM. The fabricated alginate NiFe2O4 nanoparticles cryogel-based glucose biosensor showed a linear response for glucose determination with a regression line of y = 18.18x + 455.28 and R² = 0.98. Furthermore, the calculated detection limit was 0.32 mM and the limit of quantification was 1.06 mM.

A Study on the Applicability of NiFe2O4 Nanoparticles as the Basis of Catalysts for the Purification of Aqueous Media from Pollutants

The aim of this work is to evaluate the application of NiFe2O4 nanoparticles with spinel structures as the basis of catalysts for the purification of aqueous media from pollutants such as manganese and arsenic. The interest in these catalysts is due to their ease of production and high absorption efficiency, which, together with their magnetic properties, allow the use of nanoparticles for a long time. The sol–gel method, followed by thermal annealing of the samples at different temperatures, was proposed as a method for the synthesis of spinel nanoparticles. The choice of the annealing temperature range of 200–1000 °C is caused by the possibility of estimating changes in the structural properties and the degree of nanoparticles crystallinity. During the study of structural changes in nanoparticles depending on the annealing temperature, it was found that in the temperature range of 200–800 °C, there is an ordering of structural parameters, while for samples obtained at annealing temperatures above 800 °C, there is a partial disorder caused by the agglomeration of nanoparticles with a subsequent increase in their size. According to the results of the studies on the purification of aqueous media from pollutants, it was found that the greatest absorption efficiency belongs to nanoparticles annealed at 500–700 °C, with the purification efficiency of 70–85%, depending on the type of pollutant. The results obtained from the use of nanoparticles as catalysts for the purification of aqueous media show great prospects for their further application on an industrial scale.

Literature Review: Synthesis Methods of NiFe2O4 Nanoparticles for Aqueous Battery Applications

Today, the application of NiFe2O4 nanoparticles is increasing in the field of technology that is in great demand, thereby increasing the demand for industrial production. The use of NiFe2O4 nanoparticles can be applied in various technologies, including aqueous batteries. Therefore, an effective method for industrial production is needed. This paper aims to discuss and compare a more efficient method in the synthesis of NiFe2O4. The research method used is a literature review of 62 papers. There are several NiFe2O4 synthesis methods, namely Coprecipitation, Citrate Precursor Technique, Mechanical Alloying, Hydrothermal, Sonochemistry, Reverse Micelle, Sol-Gel, and Pulsed Wire Discharge. The results show that the effective synthesis method of NiFe2O4 is Hydrothermal. This is because the hydrothermal method is economically feasible, environmentally friendly, and has no requirement of high temperatures in the calcination process to produce the final product. The nanoparticle size is around 29.39 nm. This paper is expected to assist in selecting the synthesis method of NiFe2O4.