scholarly journals Influence of Complex SiF62− Ions on the PEO Coatings Formed on Mg–Al6–Zn1 Alloy for Enhanced Wear and Corrosion Protection

Coatings ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 94 ◽  
Author(s):  
Zeeshan Ur Rehman ◽  
Bon Heun Koo ◽  
Dongjin Choi
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Optimum Concentration ◽  
Wear Properties ◽  
Sem Image ◽  
Wear And Corrosion ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Peo Coatings ◽  
Sem Image Analysis ◽  
Scanning Electron

The present study was carried out to explore the effect of SiF62− incorporation and concentration on the plasma electrolytic oxidation (PEO) coatings formed on AZ61 Mg alloy. The coatings were prepared using electrolyte solution with various concentration of Na2SiF6 (0.0–0.7 g/L). Highly compact coatings with minimum porosity were obtained for an optimum concentration of Na2SiF6 ~0.3 g/L added into the electrolyte. The highest corrosion resistance, ~2.04 × 105 Ω·cm2, was obtained for 0.3 g/L of Na2SiF6, in addition to its superior anti-wear properties. However, it was found from the scanning electron microscope (SEM) image analysis that increasing concentration above 0.3 g/L, could cause severe breakdown in the inner layers, and thus the said coatings could not withstand effectively against wear and corrosion.

MICROSTRUCTURE AND WEARING PROPERTIES OF PEO COATINGS: EFFECTS OF Al2O3 AND TiO2

2018 ◽  
Vol 25 (05) ◽  
pp. 1850102 ◽  
Author(s):  
Y. ZHANG ◽  
W. FAN ◽  
H. Q. DU ◽  
Y. W. ZHAO
Keyword(s):  
Photoelectron Spectroscopy ◽  
Plasma Electrolytic Oxidation ◽  
Xps Analysis ◽  
X Ray Diffraction ◽  
Properties Of Coatings ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Peo Coatings ◽  
Scanning Electron

Plasma electrolytic oxidation (PEO) coatings were formed on aluminium alloy in additive Al2O3- and TiO2-containing Na2SiO3-based electrolytes, respectively. The effect of these additives on morphology, composition and wearing properties of coatings was investigated. The morphology and composition of coatings were studied by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS). Analysis of wearing properties of coatings were done by friction and wearing experiment. It was found that the use of additives greatly affects the surface morphology of coatings. It is shown that the content of [Formula: see text]-Al2O3 in coatings formed in Al2O3-containing electrolytes increased with the addition of Al2O3. However, the content of [Formula: see text]-Al2O3 in coatings formed in TiO2-containing electrolytes first increased and then decreased. Among these coatings, the coating formed in silicate-based electrolytes system containing 7[Formula: see text]g/L Al2O3 showed the most superior wearing properties.

scholarly journals Wear and Corrosion Resistance of Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy in Electrolytes with Aluminate and Phosphate

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4037
Author(s):  
Zhenjun Peng ◽  
Hui Xu ◽  
Siqin Liu ◽  
Yuming Qi ◽  
Jun Liang
Keyword(s):  
Corrosion Resistance ◽  
Plasma Electrolytic Oxidation ◽  
Salt Spray ◽  
P Element ◽  
Alumina Coating ◽  
Al Alloy ◽  
Wear Properties ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Peo Coatings

Phosphate and aluminate electrolytes were used to prepare plasma electrolytic oxidation (PEO) coatings on 6061 aluminum alloy. The surface and cross-section microstructure, element distribution, and phase composition of the PEO coatings were characterized by SEM, EDS, XPS, and XRD. The friction and wear properties were evaluated by pin-on-disk sliding tests under dry conditions. The corrosion resistance of PEO coatings was investigated by electrochemical corrosion and salt spray tests in acidic environments. It was found that the PEO coatings prepared from both phosphate and aluminate electrolytes were mainly composed of α-Al2O3 and γ-Al2O3. The results demonstrate that a bi-layer coating is formed in the phosphate electrolyte, and a single-layered dense alumina coating with a hardness of 1300 HV is realizable in the aluminate electrolyte. The aluminate PEO coating had a lower wear rate than the phosphate PEO coating. However, the phosphate PEO coating showed a better corrosion resistance in acidic environment, which is mainly attributed to the presence of an amorphous P element at the substrate/coating interface.

scholarly journals Special Issue: Plasma Electrolytic Oxidation (PEO) Coatings

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 111
Author(s):  
Marta Mohedano ◽  
Beatriz Mingo
Keyword(s):  
Corrosion Resistance ◽  
Plasma Electrolytic Oxidation ◽  
Special Issue ◽  
Wear Properties ◽  
Technological Society ◽  
Good Corrosion Resistance ◽  
Functionalized Surfaces ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Peo Coatings

The demand of modern technological society for light structural materials (Al, Ti, Mg) emphasizes a combination of good corrosion resistance with wear properties and functionalized surfaces [...]

scholarly journals Plasma Electrolytic Oxidation (PEO) Process—Processing, Properties, and Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1375
Author(s):  
Soumya Sikdar ◽  
Pramod V. Menezes ◽  
Raven Maccione ◽  
Timo Jacob ◽  
Pradeep L. Menezes
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Nanocomposite Coatings ◽  
Mechanical And Tribological Properties ◽  
Electrolytic Oxidation ◽  
Recent Developments ◽  
Coating Formation ◽  
Wear And Corrosion Resistance ◽  
Plasma Electrolytic ◽  
Peo Coatings ◽  
Future Work

Plasma electrolytic oxidation (PEO) is a novel surface treatment process to produce thick, dense metal oxide coatings, especially on light metals, primarily to improve their wear and corrosion resistance. The coating manufactured from the PEO process is relatively superior to normal anodic oxidation. It is widely employed in the fields of mechanical, petrochemical, and biomedical industries, to name a few. Several investigations have been carried out to study the coating performance developed through the PEO process in the past. This review attempts to summarize and explain some of the fundamental aspects of the PEO process, mechanism of coating formation, the processing conditions that impact the process, the main characteristics of the process, the microstructures evolved in the coating, the mechanical and tribological properties of the coating, and the influence of environmental conditions on the coating process. Recently, the PEO process has also been employed to produce nanocomposite coatings by incorporating nanoparticles in the electrolyte. This review also narrates some of the recent developments in the field of nanocomposite coatings with examples and their applications. Additionally, some of the applications of the PEO coatings have been demonstrated. Moreover, the significance of the PEO process, its current trends, and its scope of future work are highlighted.

scholarly journals Comparison of Biocompatible Coatings Produced by Plasma Electrolytic Oxidation on cp-Ti and Ti-Zr-Nb Superelastic Alloy

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 401
Author(s):  
Ruzil Farrakhov ◽  
Olga Melnichuk ◽  
Evgeny Parfenov ◽  
Veta Mukaeva ◽  
Arseniy Raab ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Electrochemical Impedance ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
X Ray ◽  
Kinetic Coefficients ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Cp Ti ◽  
Peo Coatings

The paper compares the coatings produced by plasma electrolytic oxidation (PEO) on commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at. %) for implant applications. The PEO coatings were produced on both alloys in the identical pulsed bipolar regime. The properties of the coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The PEO process kinetics was modeled based on the Avrami theorem and Cottrell equation using a relaxation method. The resultant coatings contain TiO2, for both alloys, and NbO2, Nb2O5, ZrO2 for Ti-18Zr-15Nb alloy. The coating on the Ti-18Zr-15Nb alloy has a higher thickness, porosity, and roughness compared to that on cp-Ti. The values of the kinetic coefficients of the PEO process—higher diffusion coefficient and lower time constant for the processing of Ti-18Zr-15Nb—explain this effect. According to the electrochemical studies, PEO coatings on Ti-18Zr-15Nb alloy provide better corrosion protection. Higher corrosion resistance, porosity, and roughness contribute to better biocompatibility of the PEO coating on Ti-18Zr-15Nb alloy compared to cp-Ti.

Sign in / Sign up

Export Citation Format

Share Document