scholarly journals Dense Phases of γ-Gliadins in Confined Geometries

2021 ◽  
Vol 5 (4) ◽  
pp. 51
Author(s):  
Amélie Banc ◽  
Laurence Navailles ◽  
Jacques Leng ◽  
Denis Renard

The binary phase diagram of γ-gliadin, a wheat storage protein, in water was explored thanks to the microevaporator, an original PDMS microfluidic device. This protein, usually qualified as insoluble in aqueous environments, displayed a partial solubility in water. Two liquid phases, a very dilute and a dense phase, were identified after a few hours of accumulation time in the microevaporator. This liquid–liquid phase separation (LLPS) was further characterized through in situ micro-Raman spectroscopy of the dilute and dense protein phases. Micro-Raman spectroscopy showed a specific orientation of phenylalanine residues perpendicular to the PDMS surfaces only for the diluted phase. This orientation was ascribed to the protein adsorption at interfaces, which would act as nuclei for the growth of dense phase in bulk. This study, thanks to the use of both aqueous solvent and a microevaporator, would provide some evidence for a possible physicochemical origin of the gliadin assembly in the endoplasmic reticulum of albumen cells, leading to the formation of dense phases called protein bodies. The microfluidic tool could be used also in food science to probe protein–protein interactions in order to build up phase diagrams.

2005 ◽  
Vol 20 (12) ◽  
pp. 3270-3273 ◽  
Author(s):  
F. Berberich ◽  
H. Graafsma ◽  
B. Rousseau ◽  
A. Canizares ◽  
R. Ramy Ratiarison ◽  
...  

A unique combination of in situ synchrotron x-ray diffraction and in situ micro-Raman spectroscopy was used to study the growth process of YBa2Cu3O6+x films obtained by metal organic decomposition using trifluoroacetate precursor on LaAlO3 substrates. The techniques give complementary information: x-ray diffraction gives insight into the structural growth, whereas micro-Raman spectroscopy gives information of the chemical composition with additional information on the texture. To perform both experiments in situ, a special high-temperature process chamber was designed.


2006 ◽  
Vol 21 (2) ◽  
pp. 522-528 ◽  
Author(s):  
A. Goyal ◽  
D.A. Wiegand ◽  
F.J. Owens ◽  
Z. Iqbal

The yield strength of iron-carbon nanotube composites fabricated by in situ chemical vapor deposition of 2.2 vol% single-wall carbon nanotubes (SWNTs) inside an iron matrix showed substantial enhancement up to 45%, relative to that of similarly treated pure iron samples without carbon nanotubes of the same piece density. The work hardening coefficient and the Vickers hardness coefficient also significantly increased in these composites relative to the reference samples. X-ray diffraction together with energy dispersive x-ray measurements and micro-Raman spectroscopy indicated no concomitant formation of carbides and very little amorphous carbon during the vapor deposition process. Micro-Raman spectroscopy and scanning and transmission electron microscopy showed spectral signatures and images, respectively, indicating the formation and dispersion of SWNTs within the cavities of the iron matrix. It is suggested that the increased strength of the nanocomposites was due to the mechanical support provided to these cavities by the extremely strong SWNTs.


2011 ◽  
Vol 196 (2) ◽  
pp. 652-658 ◽  
Author(s):  
Yuichiro Tabuchi ◽  
Rei Ito ◽  
Shohji Tsushima ◽  
Shuichiro Hirai

Sign in / Sign up

Export Citation Format

Share Document