scholarly journals Investigation on the Effects of Grain Boundary on Deformation Behavior of Bicrystalline Pillar by Crystal Plasticity Finite Element Method

Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 923
Author(s):  
Hui Zhou ◽  
Pei Wang ◽  
Shanping Lu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Dislocation Density ◽  
Grain Boundary ◽  
Misorientation Angle ◽  
Deformation Behavior ◽  
Boundary Misorientation ◽  
Crystal Orientations ◽  
Grain Boundary Misorientation ◽  
Element Method

A dislocation density–grain boundary interaction scheme coupled with the dislocation density-based crystalline plasticity finite element method has been established and used to investigate the deformation behavior of bicrystalline pillars with the same grain boundary misorientation angle but different crystal orientations. It is found that the angle between the activated slip systems, which is determined by the crystal orientations, rather than the grain boundary misorientation angle, influences the interactions between the plastic slip and the grain boundary, which further influence the heterogeneous deformation of bicrystalline specimens.

Computation on continuous grain refinement in AA1050 aluminum during repetitive tube expansion and shrinking technique

2015 ◽  
Vol 232 (4) ◽  
pp. 307-318
Author(s):  
H Jafarzadeh ◽  
K Abrinia
Keyword(s):  
Finite Element Method ◽  
Plastic Deformation ◽  
Grain Size ◽  
Finite Element ◽  
Dislocation Density ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Half Cycle ◽  
Tube Expansion ◽  
Element Method

The microstructure evolution during recently developed severe plastic deformation method named repetitive tube expansion and shrinking of commercially pure AA1050 aluminum tubes has been studied in this paper. The behavior of the material under repetitive tube expansion and shrinking including grain size and dislocation density was simulated using the finite element method. The continuous dynamic recrystallization of AA1050 during severe plastic deformation was considered as the main grain refinement mechanism in micromechanical constitutive model. Also, the flow stress of material in macroscopic scale is related to microstructure quantities. This is in contrast to the previous approaches in finite element method simulations of severe plastic deformation methods where the microstructure parameters such as grain size were not considered at all. The grain size and dislocation density data were obtained during the simulation of the first and second half-cycles of repetitive tube expansion and shrinking, and good agreement with experimental data was observed. The finite element method simulated grain refinement behavior is consistent with the experimentally obtained results, where the rapid decrease of the grain size occurred during the first half-cycle and slowed down from the second half-cycle onwards. Calculations indicated a uniform distribution of grain size and dislocation density along the tube length but a non-uniform distribution along the tube thickness. The distribution characteristics of grain size, dislocation density, hardness, and effective plastic strain were consistent with each other.

scholarly journals The Effects of Grain Boundary Misorientation on the Mechanical Properties and Mechanism of Plastic Deformation of Ni/Ni3Al: A Molecular Dynamics Study

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5715
Author(s):  
Jun Ding ◽  
Sheng-Lai Zhang ◽  
Quan Tong ◽  
Lu-Sheng Wang ◽  
Xia Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Dynamics ◽  
Plastic Deformation ◽  
Grain Boundary ◽  
Misorientation Angle ◽  
Interfacial Energy ◽  
Stacking Faults ◽  
Boundary Misorientation ◽  
Grain Boundary Misorientation ◽  
Mechanisms Of Plastic Deformation

The effects of grain boundary misorientation angle (θ) on mechanical properties and the mechanism of plastic deformation of the Ni/Ni3Al interface under tensile loading were investigated using molecular dynamics simulations. The results show that the space lattice arrangement at the interface is dependent on grain boundary misorientations, while the interfacial energy is dependent on the arrangement. The interfacial energy varies in a W pattern as the grain boundary misorientation increases from 0° to 90°. Specifically, the interfacial energy first decreases and then increases in both segments of 0–60° and 60–90°. The yield strength, elastic modulus, and mean flow stress decrease as the interfacial energy increases. The mechanism of plastic deformation varies as the grain boundary misorientation angle (θ) increases from 0° to 90°. When θ = 0°, the microscopic plastic deformation mechanisms of the Ni and Ni3Al layers are both dominated by stacking faults induced by Shockley dislocations. When θ = 30°, 60°, and 80°, the mechanisms of plastic deformation of the Ni and Ni3Al layers are the decomposition of stacking faults into twin grain boundaries caused by extended dislocations and the proliferation of stacking faults, respectively. When θ = 90°, the mechanisms of plastic deformation of both the Ni and Ni3Al layers are dominated by twinning area growth resulting from extended dislocations.

Sign in / Sign up

Export Citation Format

Share Document