scholarly journals Theoretical Investigations of a BN Polymorph with sp2 + sp3 Hybridizations

Crystals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1574
Author(s):  
Xinhai Yu ◽  
Riguge Su ◽  
Bei He ◽  
Binchang Ma
Keyword(s):  
Density Functional ◽  
Mechanical Anisotropy ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Theoretical Investigations ◽  
M Phase ◽  
The Difference ◽  
The Stability ◽  
Xrd Patterns

The crystal structure, mechanical anisotropy, elastic properties and electronic characteristics, as well as the stability, of P4/m BN are predicted by means of density functional theory. In this work, BN in the P4/m phase demonstrates mechanical and dynamical stability. Compared with the values of bulk B, E and G in the P4/m phase, the B of BN in the P4/m phase is greater than that of dz4 BN, while the G and E of P4/m BN are greater than those of Pnc2 BN and dz4 BN. The ratio of the bulk-to-shear modulus for P4/m BN is less than 1.75 and dz4 BN, dz2 BN and lzlz2 BN, indicating that P4/m BN is more brittle than dz4 BN, dz2 BN and lzlz2 BN. P4/m BN exhibits stronger mechanical anisotropy in G and E than Pbca BN, P42/mnm BN and Pm-3m BN but much weaker mechanical anisotropy than P4/mbm BN, B7N7, B11N11 and B15N15. In addition, P4/m BN is a quasi-direct bandgap semiconductor, and the difference between the direct and the indirect bandgap is 0.008 eV. In order to obtain further characteristics of P4/m BN for future synthetic verification, the X-ray diffraction (XRD) patterns for P4/m BN are also calculated. Given its properties, P4/m BN is a good candidate for photoelectric devices.

scholarly journals Boosting the Stability of Boron Peroxides through Subphthalocyanine Coordination

2021 ◽  
Vol 03 (02) ◽  
pp. 141-145
Author(s):  
Jorge Labella ◽  
Elisa López-Serrano ◽  
Tomás Torres
Keyword(s):  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Lewis Base ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
The Stability ◽  
The Impact ◽  
Structural And Optoelectronic Properties

The great potential of subphthalocyanines (SubPcs) to stabilize boron peroxides has been demonstrated. In particular, a subphthalocyanato boron (III) peroxide has been prepared in good yield via boron triflate. This derivative is remarkably stable under ambient conditions and can be fully characterized. The impact of the peroxide group on the structural and optoelectronic properties of SubPc was examined by NMR and UV/Vis spectroscopies, as well as single-crystal X-ray diffraction analysis. Moreover, density functional theory calculations were performed to explain the experimental results. The reactivity of this peculiar boron peroxide as an oxidant and a Lewis base was also studied.

Structure-forming units of amino acid maleates. Case study ofL-valinium hydrogen maleate

2016 ◽  
Vol 72 (1) ◽  
pp. 160-163 ◽  
Author(s):  
Denis Rychkov ◽  
Sergey Arkhipov ◽  
Elena Boldyreva
Keyword(s):  
Amino Acid ◽  
Density Functional ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Bulk Powder ◽  
Ft Ir ◽  
The Stability ◽  
Almost All

A new salt of L-valinium hydrogen maleate was used as an example to study structure-forming units in amino acid maleates. This compound was crystallized, its structure solved from single-crystal X-ray diffraction data, and the phase purity of the bulk powder sample confirmed by X-ray powder diffraction and FT–IR spectra. The stability of the new salt was analyzed using density functional theory andPIXELcalculations with focus on theC22(12) structure-forming crystallographic motif. This motif was of particular interest as it is common for almost all maleates. The exceptionally high ability of maleic acid to form salts with various amino acids was rationalized.

scholarly journals The crystal structure of Rb2Ti2O5

2017 ◽  
Vol 73 (6) ◽  
pp. 1142-1150 ◽  
Author(s):  
Rémi Federicci ◽  
Benoit Baptiste ◽  
Fabio Finocchi ◽  
Florin Popa ◽  
Luc Brohan ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Density Functional ◽  
Structural Transition ◽  
Ferroelectric Phase ◽  
Density Functional Theory Calculations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Transmission Electron ◽  
The Stability

Recent results have demonstrated an exceptionally high permittivity in the range 200–330 K in crystalline titanium oxide Rb2Ti2O5. In this article, the possibility of a structural transition giving rise to ferroelectricity is carefully inspected. In particular, X-ray diffraction, high-resolution transmission electron microscopy and Raman spectroscopy are performed. The crystal structure is shown to remain invariant and centrosymmetric at all temperatures between 90 K and 450 K. The stability of the C2/m structure is confirmed by density functional theory calculations. These important findings allow the existence of a conventional ferroelectric phase transition to be ruled out as a possible mechanism for the colossal permittivity and polarization observed in this material.

X-ray diffraction and density functional theory studies of R(Fe0.5Co0.5)O3 (R = Pr, Nd, Sm, Eu, Gd)

2016 ◽  
Vol 31 (4) ◽  
pp. 259-266 ◽  
Author(s):  
W. Wong-Ng ◽  
G. Liu ◽  
I. Levin ◽  
I. Williamson ◽  
P. Ackerman ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Transmission Electron ◽  
Bond Strain ◽  
Xrd Patterns

The structure of a series of lanthanide iron cobalt perovskite oxides, R(Fe0.5Co0.5)O3 (R = Pr, Nd, Sm, Eu, and Gd), have been investigated. The space group of these compounds was confirmed to be orthorhombic Pnma (No. 62), Z = 4. From Pr to Gd, the lattice parameter a varies from 5.466 35(13) Å to 5.507 10(13) Å, b from 7.7018(2) to 7.561 75(13) Å, c from 5.443 38(10) to 5.292 00(8) Å, and unit-cell volume V from 229.170(9) Å3 to 220.376(9) Å3, respectively. While the trend of V follows the trend of the lanthanide contraction, the lattice parameter “a” increases as the ionic radius r(R3+) decreases. X-ray diffraction (XRD) and transmission electron microscopy confirm that Fe and Co are disordered over the octahedral sites. The structure distortion of these compounds is evidenced in the tilt angles θ, ϕ, and ω, which represent rotations of an octahedron about the pseudocubic perovskite [110]p, [001]p, and [111]p axes. All three tilt angles increase across the lanthanide series (for R = Pr to R = Gd: θ increases from 12.3° to 15.2°, ϕ from 7.5° to 15.8°, and ω from 14.4° to 21.7°), indicating a greater octahedral distortion as r(R3+) decreases. The bond valence sum for the sixfold (Fe/Co) site and the eightfold R site of R(Fe0.5Co0.5)O3 reveal no significant bond strain. Density Functional Theory calculations for Pr(Fe0.5Co0.5)O3 support the disorder of Fe and Co and suggest that this compound to be a narrow band gap semiconductor. XRD patterns of the R(Fe0.5Co0.5)O3 samples were submitted to the Powder Diffraction File.

Site preference and atomic ordering in the ternary Rh5Ga2As: first-principles calculations

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Nilanjan Roy ◽  
Sucharita Giri ◽  
Harshit ◽  
Partha P. Jana
Keyword(s):  
Total Energy ◽  
First Principles ◽  
Density Functional ◽  
Structure Type ◽  
Site Preference ◽  
X Ray Diffraction ◽  
Atomic Ordering ◽  
Functional Theory ◽  
The Stability ◽  
Bonding Characteristics

Abstract The site preference and atomic ordering of the ternary Rh5Ga2As have been investigated using first-principles density functional theory (DFT). An interesting atomic ordering of two neighboring elements Ga and As reported in the structure of Rh5Ga2As by X-ray diffraction data only is confirmed by first-principles total-energy calculations. The previously reported experimental model with Ga/As ordering is indeed the most stable in the structure of Rh5Ga2As. The calculation detected that there is an obvious trend concerning the influence of the heteroatomic Rh–Ga/As contacts on the calculated total energy. Interestingly, the orderly distribution of As and Ga that is found in the binary GaAs (Zinc-blende structure type), retained to ternary Rh5Ga2As. The density of states (DOS) and Crystal Orbital Hamiltonian Population (COHP) are calculated to enlighten the stability and bonding characteristics in the structure of Rh5Ga2As. The bonding analysis also confirms that Rh–Ga/As short contacts are the major driving force towards the overall stability of the compound.

A DFT study of spherands containing five anisyl groups — Highly preorganized to bind the alkali metal

2006 ◽  
Vol 84 (8) ◽  
pp. 1045-1049 ◽  
Author(s):  
Shabaan AK Elroby ◽  
Kyu Hwan Lee ◽  
Seung Joo Cho ◽  
Alan Hinchliffe
Keyword(s):  
Density Functional Theory ◽  
Binding Energy ◽  
Density Functional ◽  
Ionic Radius ◽  
Binding Energies ◽  
Cavity Size ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Good Agreement

Although anisyl units are basically poor ligands for metal ions, the rigid placements of their oxygens during synthesis rather than during complexation are undoubtedly responsible for the enhanced binding and selectivity of the spherand. We used standard B3LYP/6-31G** (5d) density functional theory (DFT) to investigate the complexation between spherands containing five anisyl groups, with CH2–O–CH2 (2) and CH2–S–CH2 (3) units in an 18-membered macrocyclic ring, and the cationic guests (Li+, Na+, and K+). Our geometric structure results for spherands 1, 2, and 3 are in good agreement with the previously reported X-ray diffraction data. The absolute values of the binding energy of all the spherands are inversely proportional to the ionic radius of the guests. The results, taken as a whole, show that replacement of one anisyl group by CH2–O–CH2 (2) and CH2–S–CH2 (3) makes the cavity bigger and less preorganized. In addition, both the binding and specificity decrease for small ions. The spherands 2 and 3 appear beautifully preorganized to bind all guests, so it is not surprising that their binding energies are close to the parent spherand 1. Interestingly, there is a clear linear relation between the radius of the cavity and the binding energy (R2 = 0.999).Key words: spherands, preorganization, density functional theory, binding energy, cavity size.

On tungstates of divalent cations (III) – Pb5O2[WO6]

2020 ◽  
Vol 235 (8-9) ◽  
pp. 311-317
Author(s):  
Stephan G. Jantz ◽  
Florian Pielnhofer ◽  
Henning A. Höppe
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Quantum Chemical ◽  
Density Functional ◽  
Divalent Cations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
First Results ◽  
Electrostatic Calculations

Abstract${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ was discovered as a frequently observed side phase during our investigation on lead tungstates. Its crystal structure was solved by single-crystal X-ray diffraction ($P{2}_{1}/n$, $a=7.4379\left(2\right)$ Å, $b=12.1115\left(4\right)$ Å, $c=10.6171\left(3\right)$ Å, $\beta =90.6847\left(8\right)$°, $Z=4$, ${R}_{\text{int}}=0.038$, ${R}_{1}=0.020$, $\omega {R}_{2}=0.029$, 4188 data, 128 param.) and is isotypic with ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{Te}}_{6}\right]$. ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ comprises a layered structure built up by non-condensed [WO6]${}^{6-}$ octahedra and ${\left[{\text{O}}_{4}{\text{Pb}}_{10}\right]}^{12+}$ oligomers. The compound was characterised by spectroscopic measurements (Infrared (IR), Raman and Ultraviolet–visible (UV/Vis) spectra) as well as quantum chemical and electrostatic calculations (density functional theory (DFT), MAPLE) yielding a band gap of 2.9 eV fitting well with the optical one of 2.8 eV. An estimation of the refractive index based on the Gladstone-Dale relationship yielded $n\approx 2.31$. Furthermore first results of the thermal analysis are presented.

scholarly journals Metal-Rich Metallaboranes: Synthesis, Structures and Bonding of Bi- and Trimetallic Open-Faced Cobaltaboranes

Inorganics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 28
Author(s):  
Kriti Pathak ◽  
Chandan Nandi ◽  
Jean-François Halet ◽  
Sundargopal Ghosh
Keyword(s):  
Electronic Structures ◽  
Density Functional ◽  
Room Temperature ◽  
Electron Pair ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Cluster 2 ◽  
Cobalt Center

Synthesis, isolation, and structural characterization of unique metal rich diamagnetic cobaltaborane clusters are reported. They were obtained from reactions of monoborane as well as modified borohydride reagents with cobalt sources. For example, the reaction of [Cp*CoCl]2 with [LiBH4·THF] and subsequent photolysis with excess [BH3·THF] (THF = tetrahydrofuran) at room temperature afforded the 11-vertex tricobaltaborane nido-[(Cp*Co)3B8H10] (1, Cp* = η5-C5Me5). The reaction of Li[BH2S3] with the dicobaltaoctaborane(12) [(Cp*Co)2B6H10] yielded the 10-vertex nido-2,4-[(Cp*Co)2B8H12] cluster (2), extending the library of dicobaltadecaborane(14) analogues. Although cluster 1 adopts a classical 11-vertex-nido-geometry with one cobalt center and four boron atoms forming the open pentagonal face, it disobeys the Polyhedral Skeletal Electron Pair Theory (PSEPT). Compound 2 adopts a perfectly symmetrical 10-vertex-nido framework with a plane of symmetry bisecting the basal boron plane resulting in two {CoB3} units bridged at the base by two boron atoms and possesses the expected electron count. Both compounds were characterized in solution by multinuclear NMR and IR spectroscopies and by mass spectrometry. Single-crystal X-ray diffraction analyses confirmed the structures of the compounds. Additionally, density functional theory (DFT) calculations were performed in order to study and interpret the nature of bonding and electronic structures of these complexes.

Sign in / Sign up

Export Citation Format

Share Document