scholarly journals Insight into Physical and Thermodynamic Properties of X3Ir (X = Ti, V, Cr, Nb and Mo) Compounds Influenced by Refractory Elements: A First-Principles Calculation

Crystals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 104 ◽  
Author(s):  
Dong Chen ◽  
Jiwei Geng ◽  
Yi Wu ◽  
Mingliang Wang ◽  
Cunjuan Xia
Keyword(s):  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Debye Temperatures ◽  
Experimental Parameters ◽  
Experimental Values

The effects of refractory metals on physical and thermodynamic properties of X3Ir (X = Ti, V, Cr, Nb and Mo) compounds were investigated using local density approximation (LDA) and generalized gradient approximation (GGA) methods within the first-principles calculations based on density functional theory. The optimized lattice parameters were both in good compliance with the experimental parameters. The GGA method could achieve an improved structural optimization compared to the LDA method, and thus was utilized to predict the elastic, thermodynamic and electronic properties of X3Ir (X = Ti, V, Cr, Nb and Mo) compounds. The calculated mechanical properties (i.e., elastic constants, elastic moduli and elastic anisotropic behaviors) were rationalized and discussed in these intermetallics. For instance, the derived bulk moduli exhibited the sequence of Ti3Ir < Nb3Ir < V3Ir < Cr3Ir < Mo3Ir. This behavior was discussed in terms of the volume of unit cell and electron density. Furthermore, Debye temperatures were derived and were found to show good consistency with the experimental values, indicating the precision of our calculations. Finally, the electronic structures were analyzed to explain the ductile essences in the iridium compounds.

Structural, elastic and thermodynamic properties of A15-type compounds V3X (X = Ir, Pt and Au) from first-principles calculations

2016 ◽  
Vol 30 (35) ◽  
pp. 1650414 ◽  
Author(s):  
Mingliang Wang ◽  
Zhe Chen ◽  
Dong Chen ◽  
Cunjuan Xia ◽  
Yi Wu
Keyword(s):  
Thermodynamic Properties ◽  
Debye Temperature ◽  
First Principles ◽  
Density Functional ◽  
Coefficient Of Thermal Expansion ◽  
Local Density ◽  
Debye Model ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Experimental Values

The structural, elastic and thermodynamic properties of the A15 structure V3Ir, V3Pt and V3Au were studied using first-principles calculations based on the density functional theory (DFT) within generalized gradient approximation (GGA) and local density approximation (LDA) methods. The results have shown that both GGA and LDA methods can process the structural optimization in good agreement with the available experimental parameters in the compounds. Furthermore, the elastic properties and Debye temperatures estimated by LDA method are typically larger than the GGA methods. However, the GGA methods can make better prediction with the experimental values of Debye temperature in V3Ir, V3Pt and V3Au, signifying the precision of the calculating work. Based on the E–V data derived from the GGA method, the variations of the Debye temperature, coefficient of thermal expansion and heat capacity under pressure ranging from 0 GPa to 50 GPa and at temperature ranging from 0 K to 1500 K were obtained and analyzed for all compounds using the quasi-harmonic Debye model.

scholarly journals Strain Conditions for the Inverse Heusler Type Fully Compensated Spin-Gapless Semiconductor Ti2MnAl: A First-Principles Study

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2091 ◽  
Author(s):  
Tie Yang ◽  
Liyu Hao ◽  
Rabah Khenata ◽  
Xiaotian Wang
Keyword(s):  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
Theoretical Study ◽  
Debye Model ◽  
Pressure Effects ◽  
First Principles Calculation ◽  
Strain Condition ◽  
Functional Theory ◽  
Future Work

In this work, we systematically studied the structural, electronic, magnetic, mechanical and thermodynamic properties of the fully compensated spin-gapless inverse Heusler Ti2MnAl compound under pressure strain condition by applying the first-principles calculation based on density functional theory and the quasi-harmonic Debye model. The obtained structural, electronic and magnetic behaviors without pressure are well consistent with previous studies. It is found that the spin-gapless characteristic is destroyed at 20 GPa and then restored with further increase in pressure. While, the fully compensated ferromagnetism shows a better resistance against the pressure up to 30 GPa and then becomes to non-magnetism at higher pressure. Tetragonal distortion has also been investigated and it is found the spin-gapless property is only destroyed when c/a is less than 1 at 95% volume. Three independent elastic constants and various moduli have been calculated and they all show increasing tendency with pressure increase. Additionally, the pressure effects on the thermodynamic properties under different temperature have been studied, including the normalized volume, thermal expansion coefficient, heat capacity at constant volume, Grüneisen constant and Debye temperature. Overall, this theoretical study presents a detailed analysis of the physical properties’ variation under strain condition from different aspects on Ti2MnAl and, thus, can provide a helpful reference for the future work and even inspire some new studies and lead to some insight on the application of this material.

Thermodynamic Properties of CaSiO3 Perovskite at High Pressure and High Temperature

2009 ◽  
Vol 64 (5-6) ◽  
pp. 399-404 ◽  
Author(s):  
Zi-Jiang Liu ◽  
Xiao-Ming Tan ◽  
Yuan Guo ◽  
Xiao-Ping Zheng ◽  
Wen-Zhao Wu
Keyword(s):  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
High Pressures ◽  
Local Density ◽  
Harmonic Approximation ◽  
Debye Model ◽  
Functional Theory ◽  
Casio3 Perovskite ◽  
First Time

The thermodynamic properties of tetragonal CaSiO3 perovskite are predicted at high pressures and temperatures using the Debye model for the first time. This model combines the ab initio calculations within local density approximation using pseudopotentials and a plane wave basis in the framework of density functional theory, and it takes into account the phononic effects within the quasi-harmonic approximation. It is found that the calculated equation of state is in excellent agreement with the observed values at ambient condition. Based on the first-principles study and the Debye model, the thermal properties including the Debye temperature, the heat capacity, the thermal expansion and the entropy are obtained in the whole pressure range from 0 to 150 GPa and temperature range from 0 to 2000 K.

scholarly journals Structural and Electronic Properties of Orthorhombic Phase Bi2Se3 Based On First-Principles Study

2019 ◽  
Vol 16 (2) ◽  
pp. 77 ◽  
Author(s):  
Muhammad Zamir Mohyedin ◽  
Afiq Radzwan ◽  
Mohammad Fariz Mohamad Taib ◽  
Rosnah Zakaria ◽  
Nor Kartini Jaafar ◽  
...  
Keyword(s):  
Electronic Properties ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Computer Code ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Exchange Correlation ◽  
Percentage Difference ◽  
Structural And Electronic Properties

Bi2Se3 is one of the promising materials in thermoelectric devices and very useful out of environmental concern due to its efficiency to perform at room temperature. Based on the first-principles calculation of density functional theory (DFT) by using CASTEP computer code, structural and electronic properties of Bi2Se3 were investigated. The calculation is conducted within the exchange-correlation of local density approximation (LDA) and generalized gradient approximation within the revision of Perdew-Burke-Ernzerhof (GGA-PBE) functional. It was found that the results are consistent with previous works of theoretical study with small percentage difference. LDA exchange-correlation functional method is more accurate and have a better agreement than GGA-PBE to describe the structural properties of Bi2Se3 which consist of lattice parameters. LDA functional also shown more accurate electronic structure of Bi2Se3 that consist of band structure and density of states (DOS) which consistent with most previous theoretical works with small percentage difference. This study proves the reliability of CASTEP computer code and show LDA exchange-correlation functional is more accurate in describing the nature of Bi2Se3 compared to the other functionals.

THERMODYNAMIC PROPERTIES OF MgSiO3 POST-PEROVSKITE

2010 ◽  
Vol 24 (03) ◽  
pp. 315-324
Author(s):  
ZI-JIANG LIU ◽  
XIAO-WEI SUN ◽  
CAI-RONG ZHANG ◽  
LI-NA TIAN ◽  
YUAN GUO
Keyword(s):  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
High Pressures ◽  
Local Density ◽  
Harmonic Approximation ◽  
Debye Model ◽  
Functional Theory ◽  
High Pressures And Temperatures ◽  
First Time

The thermodynamic properties of MgSiO 3 post-perovskite are predicted at high pressures and temperatures using the Debye model for the first time. This model combines with ab initio calculations within local density approximation using pseudopotentials and a plane wave basis in the framework of density functional theory, and it takes into account the phononic effects within the quasi-harmonic approximation. It is found that the calculated equation of state of MgSiO 3 post-perovskite is in excellent agreement with the latest observed values. Based on the first-principles study and the Debye model, the thermal properties including the Debye temperature, the heat capacity, the thermal expansion, and the entropy are obtained in the whole pressure range from 0 to 150 GPa and temperature range from 0 to 2000 K.

ELASTIC, ELECTRONIC AND THERMODYNAMIC PROPERTIES OF Rh3X(X = Zr, Nb and Ta) INTERMETALLIC COMPOUNDS

2014 ◽  
Vol 28 (03) ◽  
pp. 1450006 ◽  
Author(s):  
M. OULD KADA ◽  
T. SEDDIK ◽  
A. SAYEDE ◽  
R. KHENATA ◽  
A. BOUHEMADOU ◽  
...  
Keyword(s):  
Thermodynamic Properties ◽  
Intermetallic Compounds ◽  
Density Functional ◽  
High Pressures ◽  
Local Density ◽  
Generalized Gradient ◽  
Charge Densities ◽  
Densities Of States ◽  
Bonding Properties ◽  
Experimental Values

Structural, electronic, elastic and thermodynamic properties of Rh 3 X ( X = Zr , Nb , Ta ) intermetallic compounds are investigated in the framework of density functional theory (DFT). The exchange-correlation (XC) potential is treated with the generalized gradient approximation (GGA) and local density approximation (LDA). The computed ground state properties agree well with the available theoretical and experimental values. The elastic constants are obtained by calculating the total energy versus volume conserving strains using Mehl model. The electronic and bonding properties are discussed from the calculations of band structures (BSs), densities of states and electron charge densities. The volume and bulk modulus at high pressure and temperature are investigated. Additionally, thermodynamic properties such as the heat capacity, thermal expansion and Debye temperature at high pressures and temperatures are also analyzed.

FIRST-PRINCIPLES STUDY OF THE ELECTRONIC, LINEAR, AND NONLINEAR OPTICAL PROPERTIES OF Li(Nb, Ta)O3

2010 ◽  
Vol 24 (32) ◽  
pp. 6277-6290 ◽  
Author(s):  
SULEYMAN CABUK
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Nonlinear Optical ◽  
Energy Gap ◽  
Local Density ◽  
Theoretical Calculations ◽  
Total Density ◽  
Functional Theory ◽  
Experimental Values ◽  
Electron Energy Loss

We investigate the energy band structure, total density of states, the linear, nonlinear optical (NLO) response, and the electron energy-loss spectrum for Li(Nb, Ta)O 3 using first principles calculations based on density functional theory in its local density approximation. Our calculation shows that these compounds have similar structures. The indirect band gaps of 3.39 eV (LiNbO3) and 3.84 eV (LiTaO3) at the Γ–Z direction in the Brillouin zone are found. A simple scissor approximation is applied to adjust the band energy gap from the calculations to match the experimental values. The optical spectra are analyzed and the origins of some of the peaks in the spectra are discussed in terms of calculated electronic structure. Calculations are reported for the frequency-dependent complex second-order NLO susceptibilities [Formula: see text] up to 10 eV and for zero-frequency limit [Formula: see text]. The results are compared with the theoretical calculations and the available experimental data.

PHASE TRANSITION, ELASTIC AND THERMODYNAMIC PROPERTIES OF BERYLLIUM VIA FIRST PRINCIPLES

2013 ◽  
Vol 27 (24) ◽  
pp. 1350130 ◽  
Author(s):  
YAN CHENG ◽  
HAI-HUA CHEN ◽  
FAN-XIANG XUE ◽  
GUANG-FU JI ◽  
MIN GONG
Keyword(s):  
Phase Transition ◽  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
High Pressures ◽  
Intermediate Phase ◽  
Linear Thermal Expansion ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Bcc Phase

The phase transition, elastic and thermodynamic properties of beryllium (Be) have been studied at high pressures by plane-wave ultrasoft pseudopotential density functional theory (DFT) within the generalized gradient approximation (GGA). It is found that the hcp → bcc phase transition of Be occurs at 506 GPa (T = 0 K ) and occurs at 1200 K (P = 0 GPa ). The coefficients of linear thermal expansion of the hexagmal close-packed (hcp), bcc and orthorhombic Be have been calculated. The hcp → orthorhombic → bcc phase transitions do not occur in all range of pressures, that is to say, the orthorhombic Be is not an intermediate phase between the hcp and bcc Be. The obtained bulk modulus (B0) are 113.2 GPa (for hcp Be), 113.1 GPa (for bcc Be) and 70.5 GPa (for orthorhombic Be), respectively.

scholarly journals First-Principles Calculation of Transition Metal Hyperfine Coupling Constants with the Strongly Constrained and Appropriately Normed (SCAN) Density Functional and its Hybrid Variants

2019 ◽  
Vol 5 (4) ◽  
pp. 69 ◽  
Author(s):  
Dimitrios A. Pantazis
Keyword(s):  
Transition Metal ◽  
First Principles ◽  
Density Functional ◽  
Hyperfine Coupling ◽  
Coupling Constants ◽  
First Principles Calculation ◽  
Chemical System ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Hyperfine Coupling Constants

Density functional theory (DFT) is used extensively for the first-principles calculation of hyperfine coupling constants in both main-group and transition metal systems. As with many other properties, the performance of DFT for hyperfine coupling constants is of variable quality, particularly for transition metal complexes, because it strongly depends on the nature of the chemical system and the type of approximation to the exchange-correlation functional. Recently, a meta-generalized-gradient approximation (mGGA) functional was proposed that obeys all known exact constraints for such a method, known as the Strongly Constrained and Appropriately Normed (SCAN) functional. In view of its theoretically superior formulation a benchmark set of complexes is used to assess the performance of SCAN for the challenging case of transition metal hyperfine coupling constants. In addition, two global hybrid versions of the functional, SCANh and SCAN0, are described and tested. The values computed with the new functionals are compared with experiment and with those of other DFT approximations. Although the original SCAN and the SCAN-based hybrids may offer improved hyperfine coupling constants for specific systems, no uniform improvement is observed. On the contrary, there are specific cases where the new functionals fail badly due to a flawed description of the underlying electronic structure. Therefore, despite these methodological advances, systematically accurate and system-independent prediction of transition metal hyperfine coupling constants with DFT remains an unmet challenge.

Sign in / Sign up

Export Citation Format

Share Document