scholarly journals Drift Control of Pedestrian Dead Reckoning (PDR) for Long Period Navigation under Different Smartphone Poses

2021 ◽  
Vol 10 (1) ◽  
pp. 21
Author(s):  
Ahmed Mansour ◽  
Wu Chen ◽  
Huan Luo ◽  
Yaxin Li ◽  
Jingxian Wang ◽  
...  
Keyword(s):  
Inertial Sensors ◽  
Low Cost ◽  
Dead Reckoning ◽  
Field Measurements ◽  
Step Length ◽  
Detection Algorithm ◽  
Long Period ◽  
Walking Pattern ◽  
Heading Estimation ◽  
Pedestrian Dead Reckoning

The inherent errors of low-cost inertial sensors cause significant heading drift that accumulates over time, making it difficult to rely on Pedestrian Dead Reckoning (PDR) for navigation over a long period. Moreover, the flexible portability of the smartphone poses a challenge to PDR, especially for heading determination. In this work, we aimed to control the PDR drift under the conditions of the unconstrained smartphone to eventually enhance the PDR performance. To this end, we developed a robust step detection algorithm that efficiently captures the peak and valley events of the triggered steps regardless of the device’s pose. The correlation between these events was then leveraged as distinct features to improve smartphone pose detection. The proposed PDR system was then designed to select the step length and heading estimation approach based on a real-time walking pattern and pose discrimination algorithm. We also leveraged quasi-static magnetic field measurements that have less disturbance for estimating reliable compass heading and calibrating the gyro heading. Additionally, we also calibrated the step length and heading when a straight walking pattern is observed between two base nodes. Our results showed improved device pose recognition accuracy. Furthermore, robust and accurate results were achieved for step length, heading and position during long-term navigation under unconstrained smartphone conditions.

A Robust Pedestrian Dead Reckoning System Using Low-Cost Magnetic and Inertial Sensors

2019 ◽  
Vol 68 (8) ◽  
pp. 2996-3003 ◽  
Author(s):  
Ling-Feng Shi ◽  
Yu-Le Zhao ◽  
Gong-Xu Liu ◽  
Sen Chen ◽  
Yue Wang ◽  
...  
Keyword(s):  
Inertial Sensors ◽  
Low Cost ◽  
Dead Reckoning ◽  
Pedestrian Dead Reckoning

scholarly journals Multimode Pedestrian Dead Reckoning Gait Detection Algorithm Based on Identification of Pedestrian Phone Carrying Position

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Ying Guo ◽  
Qinghua Liu ◽  
Xianlei Ji ◽  
Shengli Wang ◽  
Mingyang Feng ◽  
...  
Keyword(s):  
Inertial Sensors ◽  
Distance Estimation ◽  
Dead Reckoning ◽  
Principal Component ◽  
Detection Algorithm ◽  
Estimation Accuracy ◽  
Indoor Environments ◽  
Using Data ◽  
The Time Domain ◽  
Pedestrian Dead Reckoning

Pedestrian dead reckoning (PDR) is an essential technology for positioning and navigation in complex indoor environments. In the process of PDR positioning and navigation using mobile phones, gait information acquired by inertial sensors under various carrying positions differs from noise contained in the heading information, resulting in excessive gait detection deviation and greatly reducing the positioning accuracy of PDR. Using data from mobile phone accelerometer and gyroscope signals, this paper examined various phone carrying positions and switching positions as the research objective and analysed the time domain characteristics of the three-axis accelerometer and gyroscope signals. A principal component analysis algorithm was used to reduce the dimension of the extracted multidimensional gait feature, and the extracted features were random forest modelled to distinguish the phone carrying positions. The results show that the step detection and distance estimation accuracy in the gait detection process greatly improved after recognition of the phone carrying position, which enhanced the robustness of the PDR algorithm.

scholarly journals A Pedestrian Dead Reckoning System Integrating Low - Cost MEMS Inertial Sensors and GPS Receiver

2014 ◽  
Vol 7 (2) ◽  
pp. 197-203 ◽  
Author(s):  
Jin - feng Li ◽  
◽  
Qing - hui Wang ◽  
Xiao - mei Liu ◽  
Shun Cao ◽  
...  
Keyword(s):  
Inertial Sensors ◽  
Low Cost ◽  
Dead Reckoning ◽  
Gps Receiver ◽  
Pedestrian Dead Reckoning

scholarly journals Improved Pedestrian Dead Reckoning Based on a Robust Adaptive Kalman Filter for Indoor Inertial Location System

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 294 ◽  
Author(s):  
Qigao Fan ◽  
Hai Zhang ◽  
Peng Pan ◽  
Xiangpeng Zhuang ◽  
Jie Jia ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Inertial Sensors ◽  
Dead Reckoning ◽  
Estimation Algorithm ◽  
Measurement Unit ◽  
Threshold Method ◽  
Adaptive Kalman Filter ◽  
Robust Adaptive ◽  
Heading Estimation ◽  
Pedestrian Dead Reckoning

Pedestrian dead reckoning (PDR) systems based on a microelectromechanical-inertial measurement unit (MEMS-IMU) providing advantages of full autonomy and strong anti-jamming performance are becoming a feasible choice for pedestrian indoor positioning. In order to realize the accurate positioning of pedestrians in a closed environment, an improved pedestrian dead reckoning algorithm, mainly including improved step estimation and heading estimation, is proposed in this paper. Firstly, the original signal is preprocessed using the wavelet denoising algorithm. Then, the multi-threshold method is proposed to ameliorate the step estimation algorithm. For heading estimation suffering from accumulated error and outliers, robust adaptive Kalman filter (RAKF) algorithm is proposed in this paper, and combined with complementary filter to improve positioning accuracy. Finally, an experimental platform with inertial sensors as the core is constructed. Experimental results show that positioning error is less than 2.5% of the total distance, which is ideal for accurate positioning of pedestrians in enclosed environment.

scholarly journals Axis-Exchanged Compensation and Gait Parameters Analysis for High Accuracy Indoor Pedestrian Dead Reckoning

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
Honghui Zhang ◽  
Jinyi Zhang ◽  
Duo Zhou ◽  
Wei Wang ◽  
Jianyu Li ◽  
...  
Keyword(s):  
Dead Reckoning ◽  
Step Length ◽  
Walking Distance ◽  
Analysis Algorithm ◽  
Indoor Location ◽  
Length Estimation ◽  
Gait Parameters ◽  
Parameters Analysis ◽  
Heading Estimation ◽  
Pedestrian Dead Reckoning

Pedestrian dead reckoning (PDR) is an effective way for navigation coupled with GNSS (Global Navigation Satellite System) or weak GNSS signal environment like indoor scenario. However, indoor location with an accuracy of 1 to 2 meters determined by PDR based on MEMS-IMU is still very challenging. For one thing, heading estimation is an important problem in PDR because of the singularities. For another thing, walking distance estimation is also a critical problem for pedestrian walking with randomness. Based on the above two problems, this paper proposed axis-exchanged compensation and gait parameters analysis algorithm to improve the navigation accuracy. In detail, an axis-exchanged compensation factored quaternion algorithm is put forward first to overcome the singularities in heading estimation without increasing the amount of computation. Besides, real-time heading is updated by R-adaptive Kalman filter. Moreover, gait parameters analysis algorithm can be divided into two steps: cadence detection and step length estimation. Thus, a method of cadence classification and interval symmetry is proposed to detect the cadence accurately. Furthermore, a step length model adjusted by cadence is established for step length estimation. Compared to the traditional PDR navigation, experimental results showed that the error of navigation reduces 32.6%.

scholarly journals A Proposal of a Motion Measurement System to Support Visually Impaired People in Rehabilitation Using Low-Cost Inertial Sensors

Entropy ◽  
2021 ◽  
Vol 23 (7) ◽  
pp. 848
Author(s):  
Karla Miriam Reyes Leiva ◽  
Milagros Jaén-Vargas ◽  
Miguel Ángel Cuba ◽  
Sergio Sánchez Lara ◽  
José Javier Serrano Olmedo
Keyword(s):  
Visually Impaired ◽  
Inertial Sensors ◽  
Personal Autonomy ◽  
Low Cost ◽  
Step Length ◽  
Hand Position ◽  
Visually Impaired People ◽  
Gait Parameters ◽  
Impaired Person ◽  
Further Development

The rehabilitation of a visually impaired person (VIP) is a systematic process where the person is provided with tools that allow them to deal with the impairment to achieve personal autonomy and independence, such as training for the use of the long cane as a tool for orientation and mobility (O&M). This process must be trained personally by specialists, leading to a limitation of human, technological and structural resources in some regions, especially those with economical narrow circumstances. A system to obtain information about the motion of the long cane and the leg using low-cost inertial sensors was developed to provide an overview of quantitative parameters such as sweeping coverage and gait analysis, that are currently visually analyzed during rehabilitation. The system was tested with 10 blindfolded volunteers in laboratory conditions following constant contact, two points touch, and three points touch travel techniques. The results indicate that the quantification system is reliable for measuring grip rotation, safety zone, sweeping amplitude and hand position using orientation angles with an accuracy of around 97.62%. However, a new method or an improvement of hardware must be developed to improve gait parameters’ measurements, since the step length measurement presented a mean accuracy of 94.62%. The system requires further development to be used as an aid in the rehabilitation process of the VIP. Now, it is a simple and low-cost technological aid that has the potential to improve the current practice of O&M.

scholarly journals Gravity-Based Methods for Heading Computation in Pedestrian Dead Reckoning

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1170 ◽  
Author(s):  
Adi Manos ◽  
Itzik Klein ◽  
Tamir Hazan
Keyword(s):  
Field Experiments ◽  
Dead Reckoning ◽  
Vertical Direction ◽  
Indoor Navigation ◽  
Magnetic Sensors ◽  
Dominant Factor ◽  
Heading Estimation ◽  
Using Data ◽  
Pedestrian Dead Reckoning ◽  
Gravity Direction

One of the common ways for solving indoor navigation is known as Pedestrian Dead Reckoning (PDR), which employs inertial and magnetic sensors typically embedded in a smartphone carried by a user. Estimation of the pedestrian’s heading is a crucial step in PDR algorithms, since it is a dominant factor in the positioning accuracy. In this paper, rather than assuming the device to be fixed in a certain orientation on the pedestrian, we focus on estimating the vertical direction in the sensor frame of an unconstrained smartphone. To that end, we establish a framework for gravity direction estimation and highlight the important role it has for solving the heading in the horizontal plane. Furthermore, we provide detailed derivation of several approaches for calculating the heading angle, based on either the gyroscope or the magnetic sensor, all of which employ the estimated vertical direction. These various methods—both for gravity direction and for heading estimation—are demonstrated, analyzed and compared using data recorded from field experiments with commercial smartphones.

scholarly journals Grid-Based Bayesian Filtering Methods for Pedestrian Dead Reckoning Indoor Positioning Using Smartphones

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5343
Author(s):  
Miroslav Opiela ◽  
František Galčík
Keyword(s):  
Dead Reckoning ◽  
Step Length ◽  
Indoor Positioning ◽  
Shopping Mall ◽  
Bayesian Filtering ◽  
Current Position ◽  
Positioning Systems ◽  
Time Calculation ◽  
Pedestrian Dead Reckoning ◽  
Grid Based

Indoor positioning systems for smartphones are often based on Pedestrian Dead Reckoning, which computes the current position from the previously estimated location. Noisy sensor measurements, inaccurate step length estimations, faulty direction detections, and a demand on the real-time calculation introduce the error which is suppressed using a map model and a Bayesian filtering. The main focus of this paper is on grid-based implementations of Bayes filters as an alternative to commonly used Kalman and particle filters. Our previous work regarding grid-based filters is elaborated and enriched with convolution mask calculations. More advanced implementations, the centroid grid filter, and the advanced point-mass filter are introduced. These implementations are analyzed and compared using different configurations on the same raw sensor recordings. The evaluation is performed on three sets of experiments: a custom simple path in faculty building in Slovakia, and on datasets from IPIN competitions from a shopping mall in France, 2018 and a research institute in Italy, 2019. Evaluation results suggests that proposed methods are qualified alternatives to the particle filter. Advantages, drawbacks and proper configurations of these filters are discussed in this paper.

Sign in / Sign up

Export Citation Format

Share Document